[PULL] 1st set of new IIO device support, features and cleanups for the 5.12 cycle

The following changes since commit d61adf609c48b9e91a84e9a943f0b3bcd84c3cad: staging: unisys: visorhba: enhance visorhba to use channel_interrupt (2021-01-07 16:57:50 +0100) are available in the Git repository at: https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-for-5.12a for you to fetch changes up to 1994a922eb6a7fc577b9c9b909e0fe1fefd961fa: Merge branch 'ib-iio-thermal-5.11-rc1' into togreg (2021-01-22 08:52:26 +0000) ---------------------------------------------------------------- First set of IIO new device support, cleanups etc for 5.12 Includes one immutable branch, to support some qcom-vadc patches going through IIO and thermal. Late rebase to drop a patch that should go through the hid tree. New device support: * adi,ad5766 - New driver supporting AD5766 and AD5767 16 channel DACs. * adi,ad7476 - Support for LTC2314-14 14 bit ADC (trivial to add) * hid-sensors-hinge - New driver including HID custom sensor support. * invensense,mpu6050 - Add support for the MPU-6880 (chip info all that is needed) * memsic,ms5637 - Add support for ms5803 device after a bunch of rework. * xilinx-xadc - Add support for Ultrascale System Monitor. * yamaha,yas530 - New driver for this magnetometer supporting YAS530, YAS532 adn YAS 533. Dt-binding conversions to yaml * invensense,mpu3050 * invensense,mpu6050 Cleanups and minor features * core - Copy iio_info.attrs->is_visible along with the attrs themselves. - Handle enumerate properties with gaps (i.e. reserved values in the middle of otherwise used values). - Add an of_iio_channel_get_by_name() function. * adi,adf4350 - Drop an unnecessary NULL check. * amstaos,tsl2583 - Use DIV_ROUND_CLOSEST in place of open coding. * avago,apds9960 - Add MSHW0184 ACPI id seen in the Microsoft Surface Book 3 and Surface Pro 7. * bosch,bmc150_magn - Basic regulator support. * bosch,bme680 - Use DIV_ROUND_CLOSEST in place of opencoding. * bosch,bmg160 - Basic regulator support. * hid-sensors - Add timestamp channels to all sensors types. * kionix,kxcjk1013 - Basic regulator support. * memsic - Fix ordering in trivial-device.yaml * microchip,mcp4725 - More flexible restrictions in DT binding. * plantower,pms7003 - Fix comma that should be semicolon. * qcom-vadc - Refactors to support addition of ADC-TM5 driver - Addition of a fixp_linear_interpolate function to support this common operation. * sprd,sc27xx_adc - Use DIV_ROUND_CLOSEST in place of opencoding. * st,ab8500-adc - Enable non-hw-conversion as AB505 doesn't support it. * st,stm32-adc - Drop unneeded NULL check. * st,stm32-dfsdm - Drop unneeded NULL check. * st,vl6180 - Use DIV_ROUND_CLOSEST in place of opencoding. * xilinx-xadc - Local var for &pdev->dev to avoid excessive repetition. - devm_ throughout and drop remove() ---------------------------------------------------------------- Alexandre Belloni (6): dt-bindings: trivial-devices: reorder memsic devices iio:pressure:ms5637: introduce hardware differentiation iio:pressure:ms5637: limit available sample frequencies iio:common:ms_sensors:ms_sensors_i2c: rework CRC calculation helper iio:common:ms_sensors:ms_sensors_i2c: add support for alternative PROM layout iio:pressure:ms5637: add ms5803 support Bartosz Golaszewski (3): iio: adc: xilinx: use helper variable for &pdev->dev iio: adc: xilinx: use devm_krealloc() instead of kfree() + kcalloc() iio: adc: xilinx: use more devres helpers and remove remove() Craig Tatlor (1): fixp-arith: add a linear interpolation function Cristian Pop (3): dt-bindings: iio: dac: AD5766 yaml documentation Documentation/ABI/testing: Add documentation for AD5766 new ABI iio: dac: ad5766: add driver support for AD5766 Devajith V S (2): dt-bindings: iio: accel: kxcjk1013: Document regulator supplies iio: accel: kxcjk1013: Add rudimentary regulator support Dmitry Baryshkov (9): iio: adc: qcom-vadc: move several adc5 functions to common file iio: adc: qcom-vadc-common: use fixp_linear_interpolate iio: adc: move qcom-vadc-common.h to include dir iio: adc: qcom-spmi-adc5: use of_device_get_match_data iio: provide of_iio_channel_get_by_name() and devm_ version it iio: adc: move vadc_map_pt from header to the source file iio: adc: qcom-vadc-common: rewrite vadc7 die temp calculation iio: adc: qcom-vadc-common: simplify qcom_vadc_map_voltage_temp iio: adc: qcom-vadc-common: scale adcmap_100k_104ef_104fb Dragos Bogdan (1): iio: adc: ad7476: Add LTC2314-14 support Hans de Goede (1): iio: core: Copy iio_info.attrs->is_visible into iio_dev_opaque.chan_attr_group.is_visible Jonathan Cameron (3): dt-bindings:iio:imu:invensense,mpu6050: txt to yaml conversion dt-bindings:iio:gyro:invensense,mpu3050: txt to yaml format conversion. Merge branch 'ib-iio-thermal-5.11-rc1' into togreg Lars-Peter Clausen (7): dt-bindings:iio:xilinx-xadc: Add Xilinx System Management Wizard binding docs iio: xilinx-xadc: Add basic support for Ultrascale System Monitor iio: vl6180: Use DIV_ROUND_CLOSEST() instead of open-coding it iio: bme680: Use DIV_ROUND_CLOSEST() instead of open-coding it iio: tsl2583: Use DIV_ROUND_CLOSEST() instead of open-coding it iio: sc27xx_adc: Use DIV_ROUND_CLOSEST() instead of open-coding it iio: Handle enumerated properties with gaps Linus Walleij (3): iio: accel: yamaha-yas530: Add DT bindings iio: magnetometer: Add driver for Yamaha YAS530 iio: adc: ab8500-gpadc: Support non-hw-conversion Max Leiter (1): iio:light:apds9960 add detection for MSHW0184 ACPI device in apds9960 driver Stephan Gerhold (6): dt-bindings: iio: imu: mpu6050: Document invensense,mpu6880 iio: imu: inv_mpu6050: Add support for MPU-6880 dt-bindings: iio: gyroscope: bmg160: Document regulator supplies iio: gyro: bmg160: Add rudimentary regulator support dt-bindings: iio: magnetometer: bmc150: Document regulator supplies iio: magnetometer: bmc150: Add rudimentary regulator support Tomas Novotny (1): dt-bindings:iio:dac:microchip,mcp4725: fix properties for mcp4726 Xu Wang (3): iio: frequency: adf4350: Remove redundant null check before clk_disable_unprepare iio: adc: stm32-adc: Remove redundant null check before clk_prepare_enable/clk_disable_unprepare iio: adc: stm32-dfsdm: Remove redundant null check before clk_disable_unprepare Ye Xiang (9): HID: hid-sensor-custom: Add custom sensor iio support iio: hid-sensors: Add hinge sensor driver iio:Documentation: Add documentation for hinge sensor channels iio: hid-sensor-accel-3d: Add timestamp channel for gravity sensor iio: hid-sensor-gyro-3d: Add timestamp channel iio: hid-sensor-als: Add timestamp channel iio: hid-sensor-magn-3d: Add timestamp channel iio: hid-sensor-incl-3d: Add timestamp channel iio: hid-sensor-rotation: Add timestamp channel Zheng Yongjun (1): iio: chemical: pms7003: convert comma to semicolon Documentation/ABI/testing/sysfs-bus-iio | 11 + Documentation/ABI/testing/sysfs-bus-iio-dac-ad5766 | 31 + .../bindings/iio/accel/kionix,kxcjk1013.yaml | 3 + .../devicetree/bindings/iio/adc/xilinx-xadc.txt | 49 +- .../devicetree/bindings/iio/dac/adi,ad5766.yaml | 63 ++ .../bindings/iio/dac/microchip,mcp4725.yaml | 31 +- .../bindings/iio/gyroscope/bosch,bmg160.yaml | 3 + .../bindings/iio/gyroscope/invensense,mpu3050.txt | 45 - .../bindings/iio/gyroscope/invensense,mpu3050.yaml | 70 ++ .../devicetree/bindings/iio/imu/inv_mpu6050.txt | 67 -- .../bindings/iio/imu/invensense,mpu6050.yaml | 104 ++ .../iio/magnetometer/bosch,bmc150_magn.yaml | 3 + .../bindings/iio/magnetometer/yamaha,yas530.yaml | 112 +++ .../devicetree/bindings/trivial-devices.yaml | 10 +- .../devicetree/bindings/vendor-prefixes.yaml | 2 + drivers/hid/hid-sensor-custom.c | 143 +++ drivers/iio/accel/hid-sensor-accel-3d.c | 6 +- drivers/iio/accel/kxcjk-1013.c | 32 + drivers/iio/adc/Kconfig | 11 +- drivers/iio/adc/ab8500-gpadc.c | 30 +- drivers/iio/adc/ad7476.c | 6 + drivers/iio/adc/qcom-pm8xxx-xoadc.c | 3 +- drivers/iio/adc/qcom-spmi-adc5.c | 95 +- drivers/iio/adc/qcom-spmi-vadc.c | 3 +- drivers/iio/adc/qcom-vadc-common.c | 229 +++-- drivers/iio/adc/sc27xx_adc.c | 2 +- drivers/iio/adc/stm32-adc-core.c | 29 +- drivers/iio/adc/stm32-adc.c | 14 +- drivers/iio/adc/stm32-dfsdm-core.c | 3 +- drivers/iio/adc/xilinx-xadc-core.c | 364 ++++--- drivers/iio/adc/xilinx-xadc-events.c | 9 +- drivers/iio/adc/xilinx-xadc.h | 6 + drivers/iio/chemical/bme680_core.c | 2 +- drivers/iio/chemical/pms7003.c | 2 +- .../iio/common/hid-sensors/hid-sensor-attributes.c | 2 + drivers/iio/common/ms_sensors/ms_sensors_i2c.c | 76 +- drivers/iio/common/ms_sensors/ms_sensors_i2c.h | 15 +- drivers/iio/dac/Kconfig | 10 + drivers/iio/dac/Makefile | 1 + drivers/iio/dac/ad5766.c | 643 ++++++++++++ drivers/iio/frequency/adf4350.c | 6 +- drivers/iio/gyro/bmg160_core.c | 25 + drivers/iio/gyro/hid-sensor-gyro-3d.c | 40 +- drivers/iio/imu/inv_mpu6050/Kconfig | 8 +- drivers/iio/imu/inv_mpu6050/inv_mpu_core.c | 9 + drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c | 5 + drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h | 2 + drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c | 5 + drivers/iio/industrialio-core.c | 44 +- drivers/iio/inkern.c | 34 +- drivers/iio/light/apds9960.c | 8 + drivers/iio/light/hid-sensor-als.c | 39 +- drivers/iio/light/tsl2583.c | 8 +- drivers/iio/light/vl6180.c | 2 +- drivers/iio/magnetometer/Kconfig | 15 + drivers/iio/magnetometer/Makefile | 2 + drivers/iio/magnetometer/bmc150_magn.c | 26 +- drivers/iio/magnetometer/hid-sensor-magn-3d.c | 48 +- drivers/iio/magnetometer/yamaha-yas530.c | 1049 ++++++++++++++++++++ drivers/iio/orientation/hid-sensor-incl-3d.c | 43 +- drivers/iio/orientation/hid-sensor-rotation.c | 46 +- drivers/iio/position/Kconfig | 16 + drivers/iio/position/Makefile | 1 + .../iio/position/hid-sensor-custom-intel-hinge.c | 385 +++++++ drivers/iio/pressure/ms5637.c | 77 +- include/linux/fixp-arith.h | 19 + include/linux/hid-sensor-ids.h | 14 + .../linux}/iio/adc/qcom-vadc-common.h | 28 +- include/linux/iio/consumer.h | 36 + 69 files changed, 3714 insertions(+), 666 deletions(-) create mode 100644 Documentation/ABI/testing/sysfs-bus-iio-dac-ad5766 create mode 100644 Documentation/devicetree/bindings/iio/dac/adi,ad5766.yaml delete mode 100644 Documentation/devicetree/bindings/iio/gyroscope/invensense,mpu3050.txt create mode 100644 Documentation/devicetree/bindings/iio/gyroscope/invensense,mpu3050.yaml delete mode 100644 Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt create mode 100644 Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml create mode 100644 Documentation/devicetree/bindings/iio/magnetometer/yamaha,yas530.yaml create mode 100644 drivers/iio/dac/ad5766.c create mode 100644 drivers/iio/magnetometer/yamaha-yas530.c create mode 100644 drivers/iio/position/hid-sensor-custom-intel-hinge.c rename {drivers => include/linux}/iio/adc/qcom-vadc-common.h (92%)

Message ID	20210122090927.2fd2e3c1@archlinux (mailing list archive)
State	New, archived
Headers	show Return-Path: <linux-iio-owner@kernel.org> Date: Fri, 22 Jan 2021 09:09:27 +0000 From: Jonathan Cameron <jic23@kernel.org> To: gregkh@linuxfoundation.org, linux-iio@vger.kernel.org Subject: [PULL] 1st set of new IIO device support, features and cleanups for the 5.12 cycle Message-ID: <20210122090927.2fd2e3c1@archlinux> MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Precedence: bulk
Series	[PULL] 1st set of new IIO device support, features and cleanups for the 5.12 cycle \| expand [PULL] 1st set of new IIO device support, features and cleanups for the 5.12 cycle

[PULL] 1st set of new IIO device support, features and cleanups for the 5.12 cycle

Pull-request

Message