diff mbox series

[v8,1/2] dt-bindings: counter: add interrupt-counter binding

Message ID 20210301080401.22190-2-o.rempel@pengutronix.de (mailing list archive)
State Mainlined, archived
Headers show
Series add support for GPIO or IRQ based event counter | expand

Commit Message

Oleksij Rempel March 1, 2021, 8:04 a.m. UTC 
Add binding for the interrupt counter node

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
---
 .../bindings/counter/interrupt-counter.yaml   | 62 +++++++++++++++++++
 1 file changed, 62 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/counter/interrupt-counter.yaml

Comments

William Breathitt Gray March 2, 2021, 1:16 a.m. UTC | #1 
On Mon, Mar 01, 2021 at 09:04:00AM +0100, Oleksij Rempel wrote:
> Add binding for the interrupt counter node
> 
> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com>

> ---
>  .../bindings/counter/interrupt-counter.yaml   | 62 +++++++++++++++++++
>  1 file changed, 62 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/counter/interrupt-counter.yaml
> 
> diff --git a/Documentation/devicetree/bindings/counter/interrupt-counter.yaml b/Documentation/devicetree/bindings/counter/interrupt-counter.yaml
> new file mode 100644
> index 000000000000..fd075d104631
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/counter/interrupt-counter.yaml
> @@ -0,0 +1,62 @@
> +# SPDX-License-Identifier: GPL-2.0
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/counter/interrupt-counter.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Interrupt counter
> +
> +maintainers:
> +  - Oleksij Rempel <o.rempel@pengutronix.de>
> +
> +description: |
> +  A generic interrupt counter to measure interrupt frequency. It was developed
> +  and used for agricultural devices to measure rotation speed of wheels or
> +  other tools. Since the direction of rotation is not important, only one
> +  signal line is needed.
> +  Interrupts or gpios are required. If both are defined, the interrupt will
> +  take precedence for counting interrupts.
> +
> +properties:
> +  compatible:
> +    const: interrupt-counter
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  gpios:
> +    maxItems: 1
> +
> +required:
> +  - compatible
> +
> +anyOf:
> +  - required: [ interrupts-extended ]
> +  - required: [ interrupts ]
> +  - required: [ gpios ]
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +    #include <dt-bindings/gpio/gpio.h>
> +
> +    counter-0 {
> +        compatible = "interrupt-counter";
> +        interrupts-extended = <&gpio 0 IRQ_TYPE_EDGE_RISING>;
> +    };
> +
> +    counter-1 {
> +        compatible = "interrupt-counter";
> +        gpios = <&gpio 2 GPIO_ACTIVE_HIGH>;
> +    };
> +
> +    counter-2 {
> +        compatible = "interrupt-counter";
> +        interrupts-extended = <&gpio 2 IRQ_TYPE_EDGE_RISING>;
> +        gpios = <&gpio 2 GPIO_ACTIVE_HIGH>;
> +    };
> +
> +...
> -- 
> 2.29.2
>
Rob Herring March 8, 2021, 5:30 p.m. UTC | #2 
On Mon, 01 Mar 2021 09:04:00 +0100, Oleksij Rempel wrote:
> Add binding for the interrupt counter node
> 
> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
> ---
>  .../bindings/counter/interrupt-counter.yaml   | 62 +++++++++++++++++++
>  1 file changed, 62 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/counter/interrupt-counter.yaml
> 

Reviewed-by: Rob Herring <robh@kernel.org>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/counter/interrupt-counter.yaml b/Documentation/devicetree/bindings/counter/interrupt-counter.yaml
new file mode 100644
index 000000000000..fd075d104631
--- /dev/null
+++ b/Documentation/devicetree/bindings/counter/interrupt-counter.yaml
@@ -0,0 +1,62 @@ 
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/counter/interrupt-counter.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Interrupt counter
+
+maintainers:
+  - Oleksij Rempel <o.rempel@pengutronix.de>
+
+description: |
+  A generic interrupt counter to measure interrupt frequency. It was developed
+  and used for agricultural devices to measure rotation speed of wheels or
+  other tools. Since the direction of rotation is not important, only one
+  signal line is needed.
+  Interrupts or gpios are required. If both are defined, the interrupt will
+  take precedence for counting interrupts.
+
+properties:
+  compatible:
+    const: interrupt-counter
+
+  interrupts:
+    maxItems: 1
+
+  gpios:
+    maxItems: 1
+
+required:
+  - compatible
+
+anyOf:
+  - required: [ interrupts-extended ]
+  - required: [ interrupts ]
+  - required: [ gpios ]
+
+additionalProperties: false
+
+examples:
+  - |
+
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+
+    counter-0 {
+        compatible = "interrupt-counter";
+        interrupts-extended = <&gpio 0 IRQ_TYPE_EDGE_RISING>;
+    };
+
+    counter-1 {
+        compatible = "interrupt-counter";
+        gpios = <&gpio 2 GPIO_ACTIVE_HIGH>;
+    };
+
+    counter-2 {
+        compatible = "interrupt-counter";
+        interrupts-extended = <&gpio 2 IRQ_TYPE_EDGE_RISING>;
+        gpios = <&gpio 2 GPIO_ACTIVE_HIGH>;
+    };
+
+...