diff mbox series

[4/4] iio: hid-sensor-temperature: Get sample timestamp from sensor hub

Message ID 20210303063615.12130-5-xiang.ye@intel.com (mailing list archive)
State New, archived
Headers show
Series Fix humidity and temperature timestamp channel issues | expand

Commit Message

Ye Xiang March 3, 2021, 6:36 a.m. UTC
Try to get sample timestamp from sensor hub first, if failed
then use system timestamp.

Signed-off-by: Ye Xiang <xiang.ye@intel.com>
---
 drivers/iio/temperature/hid-sensor-temperature.c | 14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/drivers/iio/temperature/hid-sensor-temperature.c b/drivers/iio/temperature/hid-sensor-temperature.c
index dc534ed784c3..0d8110735779 100644
--- a/drivers/iio/temperature/hid-sensor-temperature.c
+++ b/drivers/iio/temperature/hid-sensor-temperature.c
@@ -23,6 +23,7 @@  struct temperature_state {
 	int scale_post_decml;
 	int scale_precision;
 	int value_offset;
+	s64 timestamp;
 };
 
 static const u32 temperature_sensitivity_addresses[] = {
@@ -129,9 +130,14 @@  static int temperature_proc_event(struct hid_sensor_hub_device *hsdev,
 	struct iio_dev *indio_dev = platform_get_drvdata(pdev);
 	struct temperature_state *temp_st = iio_priv(indio_dev);
 
-	if (atomic_read(&temp_st->common_attributes.data_ready))
+	if (atomic_read(&temp_st->common_attributes.data_ready)) {
+		if (!temp_st->timestamp)
+			temp_st->timestamp = iio_get_time_ns(indio_dev);
+
 		iio_push_to_buffers_with_timestamp(indio_dev, &temp_st->scan,
-						   iio_get_time_ns(indio_dev));
+						   temp_st->timestamp);
+		temp_st->timestamp = 0;
+	}
 
 	return 0;
 }
@@ -148,6 +154,10 @@  static int temperature_capture_sample(struct hid_sensor_hub_device *hsdev,
 	case HID_USAGE_SENSOR_DATA_ENVIRONMENTAL_TEMPERATURE:
 		temp_st->scan.temperature_data = *(s32 *)raw_data;
 		return 0;
+	case HID_USAGE_SENSOR_TIME_TIMESTAMP:
+		temp_st->timestamp = hid_sensor_convert_timestamp(&temp_st->common_attributes,
+								  *(s64 *)raw_data);
+		return 0;
 	default:
 		return -EINVAL;
 	}