diff mbox series

[v4,2/2] iio: temperature: add driver support for ti tmp117

Message ID 20210407182147.77221-3-puranjay12@gmail.com (mailing list archive)
State New
Headers show
Series iio: temperature: add support for tmp117 | expand

Commit Message

Puranjay Mohan April 7, 2021, 6:21 p.m. UTC
TMP117 is a Digital temperature sensor with integrated Non-Volatile memory.
Add support for tmp117 driver in iio subsystem.

Datasheet: https://www.ti.com/lit/gpn/tmp117
Signed-off-by: Puranjay Mohan <puranjay12@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
---
 MAINTAINERS                      |   7 ++
 drivers/iio/temperature/Kconfig  |  10 ++
 drivers/iio/temperature/Makefile |   1 +
 drivers/iio/temperature/tmp117.c | 184 +++++++++++++++++++++++++++++++
 4 files changed, 202 insertions(+)
 create mode 100644 drivers/iio/temperature/tmp117.c

Comments

Lars-Peter Clausen April 9, 2021, 6:53 a.m. UTC | #1
On 4/7/21 8:21 PM, Puranjay Mohan wrote:
> TMP117 is a Digital temperature sensor with integrated Non-Volatile memory.
> Add support for tmp117 driver in iio subsystem.
>
> Datasheet: https://www.ti.com/lit/gpn/tmp117
> Signed-off-by: Puranjay Mohan <puranjay12@gmail.com>
> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>

Looks good to me, thanks.

Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Jonathan Cameron April 11, 2021, 2:54 p.m. UTC | #2
On Wed,  7 Apr 2021 23:51:47 +0530
Puranjay Mohan <puranjay12@gmail.com> wrote:

> TMP117 is a Digital temperature sensor with integrated Non-Volatile memory.
> Add support for tmp117 driver in iio subsystem.
> 
> Datasheet: https://www.ti.com/lit/gpn/tmp117
> Signed-off-by: Puranjay Mohan <puranjay12@gmail.com>
> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>

A few really small things in here that I tidied up whilst applying and
running local build tests.

Note that as IIO is effectively closed for the coming merge window,
I'm queuing this up for the next cycle and it will be in linux-next
after the merge window closes in about 3 weeks time.

Thanks,

Jonathan


> +static int tmp117_read_raw(struct iio_dev *indio_dev,
> +		struct iio_chan_spec const *channel, int *val,
> +		int *val2, long mask)
> +{
> +	struct tmp117_data *data = iio_priv(indio_dev);
> +	s32 ret;
> +
> +	switch (mask) {
> +	case IIO_CHAN_INFO_RAW:
> +		ret = i2c_smbus_read_word_swapped(data->client,
> +						TMP117_REG_TEMP);
> +		if (ret < 0)
> +			return ret;
> +		*val = sign_extend32(ret, 15);
> +		return IIO_VAL_INT;
> +
> +	case IIO_CHAN_INFO_CALIBBIAS:
> +		ret = i2c_smbus_read_word_swapped(data->client,
> +					TMP117_REG_TEMP_OFFSET);
> +		if (ret < 0)
> +			return ret;
> +		*val = sign_extend32(ret, 15);
> +		return IIO_VAL_INT;
> +
> +	case IIO_CHAN_INFO_SCALE:
> +		/* Conversion from 10s of uC to mC
Totally trivial so I'll fix it whilst applying, but comment convention used
in IIO is

/*
 * Conversion

> +		 * as IIO reports temperature in mC
> +		 */
> +		*val = TMP117_RESOLUTION_10UC / MICRODEGREE_PER_10MILLIDEGREE;
> +		*val2 = (TMP117_RESOLUTION_10UC %
> +					MICRODEGREE_PER_10MILLIDEGREE) * 100;
> +
> +		return IIO_VAL_INT_PLUS_MICRO;
> +
> +	default:
> +		return -EINVAL;
> +	}
> +}
> +
> +static int tmp117_write_raw(struct iio_dev *indio_dev,
> +		struct iio_chan_spec const *channel, int val,
> +		int val2, long mask)
> +{
> +	struct tmp117_data *data = iio_priv(indio_dev);
> +	s16 off;
> +
> +	switch (mask) {
> +	case IIO_CHAN_INFO_CALIBBIAS:
> +		off = clamp(val, S16_MIN, S16_MAX);

With a C=1 W=1 build (sparse an lots of warnings) this causes problems because
the S16_MIN and S16_MAX are as you might imagine s16 values whereas val is
an int.  I've added casts to force S16_MIN and S16_MAX to ints as well.

> +		if (off == data->calibbias)
> +			return 0;
> +		data->calibbias = off;
> +		return i2c_smbus_write_word_swapped(data->client,
> +						TMP117_REG_TEMP_OFFSET, off);
> +
> +	default:
> +		return -EINVAL;
> +	}
> +}
...
Andy Shevchenko April 11, 2021, 6:07 p.m. UTC | #3
On Sun, Apr 11, 2021 at 5:53 PM Jonathan Cameron <jic23@kernel.org> wrote:
>
> On Wed,  7 Apr 2021 23:51:47 +0530
> Puranjay Mohan <puranjay12@gmail.com> wrote:
>
> > TMP117 is a Digital temperature sensor with integrated Non-Volatile memory.
> > Add support for tmp117 driver in iio subsystem.

...

> > +             off = clamp(val, S16_MIN, S16_MAX);
>
> With a C=1 W=1 build (sparse an lots of warnings) this causes problems because
> the S16_MIN and S16_MAX are as you might imagine s16 values whereas val is
> an int.  I've added casts to force S16_MIN and S16_MAX to ints as well.

Good point, but better is to use clamp_t(s16, ...) rather than explicit casting.
I always consider explicit casting in C (and esp. in Linux kernel) is
a red flag. Should be really rarely needed.

> > +             if (off == data->calibbias)
> > +                     return 0;
Andy Shevchenko April 11, 2021, 6:08 p.m. UTC | #4
On Sun, Apr 11, 2021 at 9:07 PM Andy Shevchenko
<andy.shevchenko@gmail.com> wrote:
> On Sun, Apr 11, 2021 at 5:53 PM Jonathan Cameron <jic23@kernel.org> wrote:
> > On Wed,  7 Apr 2021 23:51:47 +0530
> > Puranjay Mohan <puranjay12@gmail.com> wrote:

> Good point, but better is to use clamp_t(s16, ...) rather than explicit casting.

Sorry, I meant clamp_t(int, ...) of course, otherwise it will give wrong values.

> I always consider explicit casting in C (and esp. in Linux kernel) is
> a red flag. Should be really rarely needed.
Jonathan Cameron April 18, 2021, 9:48 a.m. UTC | #5
On Sun, 11 Apr 2021 21:08:29 +0300
Andy Shevchenko <andy.shevchenko@gmail.com> wrote:

> On Sun, Apr 11, 2021 at 9:07 PM Andy Shevchenko
> <andy.shevchenko@gmail.com> wrote:
> > On Sun, Apr 11, 2021 at 5:53 PM Jonathan Cameron <jic23@kernel.org> wrote:  
> > > On Wed,  7 Apr 2021 23:51:47 +0530
> > > Puranjay Mohan <puranjay12@gmail.com> wrote:  
> 
> > Good point, but better is to use clamp_t(s16, ...) rather than explicit casting.  
> 
> Sorry, I meant clamp_t(int, ...) of course, otherwise it will give wrong values.
I've switched it over to this which is indeed nicer.

Jonathan

> 
> > I always consider explicit casting in C (and esp. in Linux kernel) is
> > a red flag. Should be really rarely needed.  
> 
> 
>
diff mbox series

Patch

diff --git a/MAINTAINERS b/MAINTAINERS
index 60ed2963e..c9b806b63 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -16666,6 +16666,13 @@  F:	include/dt-bindings/soc/ti,sci_pm_domain.h
 F:	include/linux/soc/ti/ti_sci_inta_msi.h
 F:	include/linux/soc/ti/ti_sci_protocol.h
 
+TEXAS INSTRUMENTS' TMP117 TEMPERATURE SENSOR DRIVER
+M:	Puranjay Mohan <puranjay12@gmail.com>
+L:	linux-iio@vger.kernel.org
+S:	Supported
+F:	Documentation/devicetree/bindings/iio/temperature/ti,tmp117.yaml
+F:	drivers/iio/temperature/tmp117.c
+
 THANKO'S RAREMONO AM/FM/SW RADIO RECEIVER USB DRIVER
 M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
diff --git a/drivers/iio/temperature/Kconfig b/drivers/iio/temperature/Kconfig
index f1f2a1499..c5482983f 100644
--- a/drivers/iio/temperature/Kconfig
+++ b/drivers/iio/temperature/Kconfig
@@ -97,6 +97,16 @@  config TMP007
 	  This driver can also be built as a module. If so, the module will
 	  be called tmp007.
 
+config TMP117
+	tristate "TMP117 Digital temperature sensor with integrated NV memory"
+	depends on I2C
+	help
+	  If you say yes here you get support for the Texas Instruments
+	  TMP117 Digital temperature sensor with integrated NV memory.
+
+	  This driver can also be built as a module. If so, the module will
+	  be called tmp117.
+
 config TSYS01
 	tristate "Measurement Specialties TSYS01 temperature sensor using I2C bus connection"
 	depends on I2C
diff --git a/drivers/iio/temperature/Makefile b/drivers/iio/temperature/Makefile
index 90c113115..e3392c4b2 100644
--- a/drivers/iio/temperature/Makefile
+++ b/drivers/iio/temperature/Makefile
@@ -12,5 +12,6 @@  obj-$(CONFIG_MLX90614) += mlx90614.o
 obj-$(CONFIG_MLX90632) += mlx90632.o
 obj-$(CONFIG_TMP006) += tmp006.o
 obj-$(CONFIG_TMP007) += tmp007.o
+obj-$(CONFIG_TMP117) += tmp117.o
 obj-$(CONFIG_TSYS01) += tsys01.o
 obj-$(CONFIG_TSYS02D) += tsys02d.o
diff --git a/drivers/iio/temperature/tmp117.c b/drivers/iio/temperature/tmp117.c
new file mode 100644
index 000000000..e2536e53f
--- /dev/null
+++ b/drivers/iio/temperature/tmp117.c
@@ -0,0 +1,184 @@ 
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Digital temperature sensor with integrated Non-volatile memory
+ * Copyright (c) 2021 Puranjay Mohan <puranjay12@gmail.com>
+ *
+ * Driver for the Texas Instruments TMP117 Temperature Sensor
+ * (7-bit I2C slave address (0x48 - 0x4B), changeable via ADD pins)
+ *
+ * Note: This driver assumes that the sensor has been calibrated beforehand.
+ */
+
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/bitops.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/limits.h>
+
+#include <linux/iio/iio.h>
+
+#define TMP117_REG_TEMP			0x0
+#define TMP117_REG_CFGR			0x1
+#define TMP117_REG_HIGH_LIM		0x2
+#define TMP117_REG_LOW_LIM		0x3
+#define TMP117_REG_EEPROM_UL		0x4
+#define TMP117_REG_EEPROM1		0x5
+#define TMP117_REG_EEPROM2		0x6
+#define TMP117_REG_TEMP_OFFSET		0x7
+#define TMP117_REG_EEPROM3		0x8
+#define TMP117_REG_DEVICE_ID		0xF
+
+#define TMP117_RESOLUTION_10UC		78125
+#define TMP117_DEVICE_ID		0x0117
+#define MICRODEGREE_PER_10MILLIDEGREE	10000
+
+struct tmp117_data {
+	struct i2c_client *client;
+	s16 calibbias;
+};
+
+static int tmp117_read_raw(struct iio_dev *indio_dev,
+		struct iio_chan_spec const *channel, int *val,
+		int *val2, long mask)
+{
+	struct tmp117_data *data = iio_priv(indio_dev);
+	s32 ret;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		ret = i2c_smbus_read_word_swapped(data->client,
+						TMP117_REG_TEMP);
+		if (ret < 0)
+			return ret;
+		*val = sign_extend32(ret, 15);
+		return IIO_VAL_INT;
+
+	case IIO_CHAN_INFO_CALIBBIAS:
+		ret = i2c_smbus_read_word_swapped(data->client,
+					TMP117_REG_TEMP_OFFSET);
+		if (ret < 0)
+			return ret;
+		*val = sign_extend32(ret, 15);
+		return IIO_VAL_INT;
+
+	case IIO_CHAN_INFO_SCALE:
+		/* Conversion from 10s of uC to mC
+		 * as IIO reports temperature in mC
+		 */
+		*val = TMP117_RESOLUTION_10UC / MICRODEGREE_PER_10MILLIDEGREE;
+		*val2 = (TMP117_RESOLUTION_10UC %
+					MICRODEGREE_PER_10MILLIDEGREE) * 100;
+
+		return IIO_VAL_INT_PLUS_MICRO;
+
+	default:
+		return -EINVAL;
+	}
+}
+
+static int tmp117_write_raw(struct iio_dev *indio_dev,
+		struct iio_chan_spec const *channel, int val,
+		int val2, long mask)
+{
+	struct tmp117_data *data = iio_priv(indio_dev);
+	s16 off;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_CALIBBIAS:
+		off = clamp(val, S16_MIN, S16_MAX);
+		if (off == data->calibbias)
+			return 0;
+		data->calibbias = off;
+		return i2c_smbus_write_word_swapped(data->client,
+						TMP117_REG_TEMP_OFFSET, off);
+
+	default:
+		return -EINVAL;
+	}
+}
+
+static const struct iio_chan_spec tmp117_channels[] = {
+	{
+		.type = IIO_TEMP,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+			BIT(IIO_CHAN_INFO_CALIBBIAS) | BIT(IIO_CHAN_INFO_SCALE),
+	},
+};
+
+static const struct iio_info tmp117_info = {
+	.read_raw = tmp117_read_raw,
+	.write_raw = tmp117_write_raw,
+};
+
+static int tmp117_identify(struct i2c_client *client)
+{
+	int dev_id;
+
+	dev_id = i2c_smbus_read_word_swapped(client, TMP117_REG_DEVICE_ID);
+	if (dev_id < 0)
+		return dev_id;
+	if (dev_id != TMP117_DEVICE_ID) {
+		dev_err(&client->dev, "TMP117 not found\n");
+		return -ENODEV;
+	}
+	return 0;
+}
+
+static int tmp117_probe(struct i2c_client *client)
+{
+	struct tmp117_data *data;
+	struct iio_dev *indio_dev;
+	int ret;
+
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WORD_DATA))
+		return -EOPNOTSUPP;
+
+	ret = tmp117_identify(client);
+	if (ret < 0)
+		return ret;
+
+	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	data = iio_priv(indio_dev);
+	data->client = client;
+	data->calibbias = 0;
+
+	indio_dev->name = "tmp117";
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->info = &tmp117_info;
+
+	indio_dev->channels = tmp117_channels;
+	indio_dev->num_channels = ARRAY_SIZE(tmp117_channels);
+
+	return devm_iio_device_register(&client->dev, indio_dev);
+}
+
+static const struct of_device_id tmp117_of_match[] = {
+	{ .compatible = "ti,tmp117", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, tmp117_of_match);
+
+static const struct i2c_device_id tmp117_id[] = {
+	{ "tmp117", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, tmp117_id);
+
+static struct i2c_driver tmp117_driver = {
+	.driver = {
+		.name	= "tmp117",
+		.of_match_table = tmp117_of_match,
+	},
+	.probe_new	= tmp117_probe,
+	.id_table	= tmp117_id,
+};
+module_i2c_driver(tmp117_driver);
+
+MODULE_AUTHOR("Puranjay Mohan <puranjay12@gmail.com>");
+MODULE_DESCRIPTION("TI TMP117 Temperature sensor driver");
+MODULE_LICENSE("GPL");