diff mbox series

iio: hid-sensors: select IIO_TRIGGERED_BUFFER under HID_SENSOR_IIO_TRIGGER

Message ID 20210414084955.260117-1-aardelean@deviqon.com (mailing list archive)
State New, archived
Headers show
Series iio: hid-sensors: select IIO_TRIGGERED_BUFFER under HID_SENSOR_IIO_TRIGGER | expand

Commit Message

Alexandru Ardelean April 14, 2021, 8:49 a.m. UTC
During commit 067fda1c065ff ("iio: hid-sensors: move triggered buffer
setup into hid_sensor_setup_trigger"), the
iio_triggered_buffer_{setup,cleanup}() functions got moved under the
hid-sensor-trigger module.

The above change works fine, if any of the sensors get built. However, when
only the common hid-sensor-trigger module gets built (and none of the
drivers), then the IIO_TRIGGERED_BUFFER symbol isn't selected/enforced.

Previously, each driver would enforce/select the IIO_TRIGGERED_BUFFER
symbol. With this change the HID_SENSOR_IIO_TRIGGER (for the
hid-sensor-trigger module) will enforce that IIO_TRIGGERED_BUFFER gets
selected.

All HID sensor drivers select the HID_SENSOR_IIO_TRIGGER symbol. So, this
change removes the IIO_TRIGGERED_BUFFER enforcement from each driver.

Fixes: 067fda1c065ff ("iio: hid-sensors: move triggered buffer setup into hid_sensor_setup_trigger")
Reported-by: Thomas Deutschmann <whissi@gentoo.org>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com>
---
 drivers/iio/accel/Kconfig              | 1 -
 drivers/iio/common/hid-sensors/Kconfig | 1 +
 drivers/iio/gyro/Kconfig               | 1 -
 drivers/iio/humidity/Kconfig           | 1 -
 drivers/iio/light/Kconfig              | 2 --
 drivers/iio/magnetometer/Kconfig       | 1 -
 drivers/iio/orientation/Kconfig        | 2 --
 drivers/iio/pressure/Kconfig           | 1 -
 drivers/iio/temperature/Kconfig        | 1 -
 9 files changed, 1 insertion(+), 10 deletions(-)

Comments

srinivas pandruvada April 15, 2021, 4:58 p.m. UTC | #1
On Wed, 2021-04-14 at 11:49 +0300, Alexandru Ardelean wrote:
> During commit 067fda1c065ff ("iio: hid-sensors: move triggered buffer
> setup into hid_sensor_setup_trigger"), the
> iio_triggered_buffer_{setup,cleanup}() functions got moved under the
> hid-sensor-trigger module.
> 
> The above change works fine, if any of the sensors get built.
> However, when
> only the common hid-sensor-trigger module gets built (and none of the
> drivers), then the IIO_TRIGGERED_BUFFER symbol isn't
> selected/enforced.
> 
> Previously, each driver would enforce/select the IIO_TRIGGERED_BUFFER
> symbol. With this change the HID_SENSOR_IIO_TRIGGER (for the
> hid-sensor-trigger module) will enforce that IIO_TRIGGERED_BUFFER
> gets
> selected.
> 
> All HID sensor drivers select the HID_SENSOR_IIO_TRIGGER symbol. So,
> this
> change removes the IIO_TRIGGERED_BUFFER enforcement from each driver.
> 
> Fixes: 067fda1c065ff ("iio: hid-sensors: move triggered buffer setup
> into hid_sensor_setup_trigger")
> Reported-by: Thomas Deutschmann <whissi@gentoo.org>
> Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
> Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>

> ---
>  drivers/iio/accel/Kconfig              | 1 -
>  drivers/iio/common/hid-sensors/Kconfig | 1 +
>  drivers/iio/gyro/Kconfig               | 1 -
>  drivers/iio/humidity/Kconfig           | 1 -
>  drivers/iio/light/Kconfig              | 2 --
>  drivers/iio/magnetometer/Kconfig       | 1 -
>  drivers/iio/orientation/Kconfig        | 2 --
>  drivers/iio/pressure/Kconfig           | 1 -
>  drivers/iio/temperature/Kconfig        | 1 -
>  9 files changed, 1 insertion(+), 10 deletions(-)
> 
> diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig
> index cceda3cecbcf..8b1723635cce 100644
> --- a/drivers/iio/accel/Kconfig
> +++ b/drivers/iio/accel/Kconfig
> @@ -229,7 +229,6 @@ config DMARD10
>  config HID_SENSOR_ACCEL_3D
>  	depends on HID_SENSOR_HUB
>  	select IIO_BUFFER
> -	select IIO_TRIGGERED_BUFFER
>  	select HID_SENSOR_IIO_COMMON
>  	select HID_SENSOR_IIO_TRIGGER
>  	tristate "HID Accelerometers 3D"
> diff --git a/drivers/iio/common/hid-sensors/Kconfig
> b/drivers/iio/common/hid-sensors/Kconfig
> index 24d492567336..2a3dd3b907be 100644
> --- a/drivers/iio/common/hid-sensors/Kconfig
> +++ b/drivers/iio/common/hid-sensors/Kconfig
> @@ -19,6 +19,7 @@ config HID_SENSOR_IIO_TRIGGER
>  	tristate "Common module (trigger) for all HID Sensor IIO
> drivers"
>  	depends on HID_SENSOR_HUB && HID_SENSOR_IIO_COMMON &&
> IIO_BUFFER
>  	select IIO_TRIGGER
> +	select IIO_TRIGGERED_BUFFER
>  	help
>  	  Say yes here to build trigger support for HID sensors.
>  	  Triggers will be send if all requested attributes were read.
> diff --git a/drivers/iio/gyro/Kconfig b/drivers/iio/gyro/Kconfig
> index 5824f2edf975..20b5ac7ab66a 100644
> --- a/drivers/iio/gyro/Kconfig
> +++ b/drivers/iio/gyro/Kconfig
> @@ -111,7 +111,6 @@ config FXAS21002C_SPI
>  config HID_SENSOR_GYRO_3D
>  	depends on HID_SENSOR_HUB
>  	select IIO_BUFFER
> -	select IIO_TRIGGERED_BUFFER
>  	select HID_SENSOR_IIO_COMMON
>  	select HID_SENSOR_IIO_TRIGGER
>  	tristate "HID Gyroscope 3D"
> diff --git a/drivers/iio/humidity/Kconfig
> b/drivers/iio/humidity/Kconfig
> index 6549fcf6db69..2de5494e7c22 100644
> --- a/drivers/iio/humidity/Kconfig
> +++ b/drivers/iio/humidity/Kconfig
> @@ -52,7 +52,6 @@ config HID_SENSOR_HUMIDITY
>  	tristate "HID Environmental humidity sensor"
>  	depends on HID_SENSOR_HUB
>  	select IIO_BUFFER
> -	select IIO_TRIGGERED_BUFFER
>  	select HID_SENSOR_IIO_COMMON
>  	select HID_SENSOR_IIO_TRIGGER
>  	help
> diff --git a/drivers/iio/light/Kconfig b/drivers/iio/light/Kconfig
> index 33ad4dd0b5c7..917f9becf9c7 100644
> --- a/drivers/iio/light/Kconfig
> +++ b/drivers/iio/light/Kconfig
> @@ -256,7 +256,6 @@ config ISL29125
>  config HID_SENSOR_ALS
>  	depends on HID_SENSOR_HUB
>  	select IIO_BUFFER
> -	select IIO_TRIGGERED_BUFFER
>  	select HID_SENSOR_IIO_COMMON
>  	select HID_SENSOR_IIO_TRIGGER
>  	tristate "HID ALS"
> @@ -270,7 +269,6 @@ config HID_SENSOR_ALS
>  config HID_SENSOR_PROX
>  	depends on HID_SENSOR_HUB
>  	select IIO_BUFFER
> -	select IIO_TRIGGERED_BUFFER
>  	select HID_SENSOR_IIO_COMMON
>  	select HID_SENSOR_IIO_TRIGGER
>  	tristate "HID PROX"
> diff --git a/drivers/iio/magnetometer/Kconfig
> b/drivers/iio/magnetometer/Kconfig
> index 5d4ffd66032e..74ad5701c6c2 100644
> --- a/drivers/iio/magnetometer/Kconfig
> +++ b/drivers/iio/magnetometer/Kconfig
> @@ -95,7 +95,6 @@ config MAG3110
>  config HID_SENSOR_MAGNETOMETER_3D
>  	depends on HID_SENSOR_HUB
>  	select IIO_BUFFER
> -	select IIO_TRIGGERED_BUFFER
>  	select HID_SENSOR_IIO_COMMON
>  	select HID_SENSOR_IIO_TRIGGER
>  	tristate "HID Magenetometer 3D"
> diff --git a/drivers/iio/orientation/Kconfig
> b/drivers/iio/orientation/Kconfig
> index a505583cc2fd..396cbbb867f4 100644
> --- a/drivers/iio/orientation/Kconfig
> +++ b/drivers/iio/orientation/Kconfig
> @@ -9,7 +9,6 @@ menu "Inclinometer sensors"
>  config HID_SENSOR_INCLINOMETER_3D
>  	depends on HID_SENSOR_HUB
>  	select IIO_BUFFER
> -	select IIO_TRIGGERED_BUFFER
>  	select HID_SENSOR_IIO_COMMON
>  	select HID_SENSOR_IIO_TRIGGER
>  	tristate "HID Inclinometer 3D"
> @@ -20,7 +19,6 @@ config HID_SENSOR_INCLINOMETER_3D
>  config HID_SENSOR_DEVICE_ROTATION
>  	depends on HID_SENSOR_HUB
>  	select IIO_BUFFER
> -	select IIO_TRIGGERED_BUFFER
>  	select HID_SENSOR_IIO_COMMON
>  	select HID_SENSOR_IIO_TRIGGER
>  	tristate "HID Device Rotation"
> diff --git a/drivers/iio/pressure/Kconfig
> b/drivers/iio/pressure/Kconfig
> index 689b978db4f9..fc0d3cfca418 100644
> --- a/drivers/iio/pressure/Kconfig
> +++ b/drivers/iio/pressure/Kconfig
> @@ -79,7 +79,6 @@ config DPS310
>  config HID_SENSOR_PRESS
>  	depends on HID_SENSOR_HUB
>  	select IIO_BUFFER
> -	select IIO_TRIGGERED_BUFFER
>  	select HID_SENSOR_IIO_COMMON
>  	select HID_SENSOR_IIO_TRIGGER
>  	tristate "HID PRESS"
> diff --git a/drivers/iio/temperature/Kconfig
> b/drivers/iio/temperature/Kconfig
> index c5482983f568..f20ae3c963cb 100644
> --- a/drivers/iio/temperature/Kconfig
> +++ b/drivers/iio/temperature/Kconfig
> @@ -45,7 +45,6 @@ config HID_SENSOR_TEMP
>  	tristate "HID Environmental temperature sensor"
>  	depends on HID_SENSOR_HUB
>  	select IIO_BUFFER
> -	select IIO_TRIGGERED_BUFFER
>  	select HID_SENSOR_IIO_COMMON
>  	select HID_SENSOR_IIO_TRIGGER
>  	help
Jonathan Cameron April 18, 2021, 10:26 a.m. UTC | #2
On Thu, 15 Apr 2021 09:58:33 -0700
Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> wrote:

> On Wed, 2021-04-14 at 11:49 +0300, Alexandru Ardelean wrote:
> > During commit 067fda1c065ff ("iio: hid-sensors: move triggered buffer
> > setup into hid_sensor_setup_trigger"), the
> > iio_triggered_buffer_{setup,cleanup}() functions got moved under the
> > hid-sensor-trigger module.
> > 
> > The above change works fine, if any of the sensors get built.
> > However, when
> > only the common hid-sensor-trigger module gets built (and none of the
> > drivers), then the IIO_TRIGGERED_BUFFER symbol isn't
> > selected/enforced.
> > 
> > Previously, each driver would enforce/select the IIO_TRIGGERED_BUFFER
> > symbol. With this change the HID_SENSOR_IIO_TRIGGER (for the
> > hid-sensor-trigger module) will enforce that IIO_TRIGGERED_BUFFER
> > gets
> > selected.
> > 
> > All HID sensor drivers select the HID_SENSOR_IIO_TRIGGER symbol. So,
> > this
> > change removes the IIO_TRIGGERED_BUFFER enforcement from each driver.
> > 
> > Fixes: 067fda1c065ff ("iio: hid-sensors: move triggered buffer setup
> > into hid_sensor_setup_trigger")
> > Reported-by: Thomas Deutschmann <whissi@gentoo.org>
> > Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
> > Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com>  
> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Applied to the fixes-togreg branch of iio.git.

Always good to see the autobuilders can find corners no one sane would ever
hit :)

Jonathan

> 
> > ---
> >  drivers/iio/accel/Kconfig              | 1 -
> >  drivers/iio/common/hid-sensors/Kconfig | 1 +
> >  drivers/iio/gyro/Kconfig               | 1 -
> >  drivers/iio/humidity/Kconfig           | 1 -
> >  drivers/iio/light/Kconfig              | 2 --
> >  drivers/iio/magnetometer/Kconfig       | 1 -
> >  drivers/iio/orientation/Kconfig        | 2 --
> >  drivers/iio/pressure/Kconfig           | 1 -
> >  drivers/iio/temperature/Kconfig        | 1 -
> >  9 files changed, 1 insertion(+), 10 deletions(-)
> > 
> > diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig
> > index cceda3cecbcf..8b1723635cce 100644
> > --- a/drivers/iio/accel/Kconfig
> > +++ b/drivers/iio/accel/Kconfig
> > @@ -229,7 +229,6 @@ config DMARD10
> >  config HID_SENSOR_ACCEL_3D
> >  	depends on HID_SENSOR_HUB
> >  	select IIO_BUFFER
> > -	select IIO_TRIGGERED_BUFFER
> >  	select HID_SENSOR_IIO_COMMON
> >  	select HID_SENSOR_IIO_TRIGGER
> >  	tristate "HID Accelerometers 3D"
> > diff --git a/drivers/iio/common/hid-sensors/Kconfig
> > b/drivers/iio/common/hid-sensors/Kconfig
> > index 24d492567336..2a3dd3b907be 100644
> > --- a/drivers/iio/common/hid-sensors/Kconfig
> > +++ b/drivers/iio/common/hid-sensors/Kconfig
> > @@ -19,6 +19,7 @@ config HID_SENSOR_IIO_TRIGGER
> >  	tristate "Common module (trigger) for all HID Sensor IIO
> > drivers"
> >  	depends on HID_SENSOR_HUB && HID_SENSOR_IIO_COMMON &&
> > IIO_BUFFER
> >  	select IIO_TRIGGER
> > +	select IIO_TRIGGERED_BUFFER
> >  	help
> >  	  Say yes here to build trigger support for HID sensors.
> >  	  Triggers will be send if all requested attributes were read.
> > diff --git a/drivers/iio/gyro/Kconfig b/drivers/iio/gyro/Kconfig
> > index 5824f2edf975..20b5ac7ab66a 100644
> > --- a/drivers/iio/gyro/Kconfig
> > +++ b/drivers/iio/gyro/Kconfig
> > @@ -111,7 +111,6 @@ config FXAS21002C_SPI
> >  config HID_SENSOR_GYRO_3D
> >  	depends on HID_SENSOR_HUB
> >  	select IIO_BUFFER
> > -	select IIO_TRIGGERED_BUFFER
> >  	select HID_SENSOR_IIO_COMMON
> >  	select HID_SENSOR_IIO_TRIGGER
> >  	tristate "HID Gyroscope 3D"
> > diff --git a/drivers/iio/humidity/Kconfig
> > b/drivers/iio/humidity/Kconfig
> > index 6549fcf6db69..2de5494e7c22 100644
> > --- a/drivers/iio/humidity/Kconfig
> > +++ b/drivers/iio/humidity/Kconfig
> > @@ -52,7 +52,6 @@ config HID_SENSOR_HUMIDITY
> >  	tristate "HID Environmental humidity sensor"
> >  	depends on HID_SENSOR_HUB
> >  	select IIO_BUFFER
> > -	select IIO_TRIGGERED_BUFFER
> >  	select HID_SENSOR_IIO_COMMON
> >  	select HID_SENSOR_IIO_TRIGGER
> >  	help
> > diff --git a/drivers/iio/light/Kconfig b/drivers/iio/light/Kconfig
> > index 33ad4dd0b5c7..917f9becf9c7 100644
> > --- a/drivers/iio/light/Kconfig
> > +++ b/drivers/iio/light/Kconfig
> > @@ -256,7 +256,6 @@ config ISL29125
> >  config HID_SENSOR_ALS
> >  	depends on HID_SENSOR_HUB
> >  	select IIO_BUFFER
> > -	select IIO_TRIGGERED_BUFFER
> >  	select HID_SENSOR_IIO_COMMON
> >  	select HID_SENSOR_IIO_TRIGGER
> >  	tristate "HID ALS"
> > @@ -270,7 +269,6 @@ config HID_SENSOR_ALS
> >  config HID_SENSOR_PROX
> >  	depends on HID_SENSOR_HUB
> >  	select IIO_BUFFER
> > -	select IIO_TRIGGERED_BUFFER
> >  	select HID_SENSOR_IIO_COMMON
> >  	select HID_SENSOR_IIO_TRIGGER
> >  	tristate "HID PROX"
> > diff --git a/drivers/iio/magnetometer/Kconfig
> > b/drivers/iio/magnetometer/Kconfig
> > index 5d4ffd66032e..74ad5701c6c2 100644
> > --- a/drivers/iio/magnetometer/Kconfig
> > +++ b/drivers/iio/magnetometer/Kconfig
> > @@ -95,7 +95,6 @@ config MAG3110
> >  config HID_SENSOR_MAGNETOMETER_3D
> >  	depends on HID_SENSOR_HUB
> >  	select IIO_BUFFER
> > -	select IIO_TRIGGERED_BUFFER
> >  	select HID_SENSOR_IIO_COMMON
> >  	select HID_SENSOR_IIO_TRIGGER
> >  	tristate "HID Magenetometer 3D"
> > diff --git a/drivers/iio/orientation/Kconfig
> > b/drivers/iio/orientation/Kconfig
> > index a505583cc2fd..396cbbb867f4 100644
> > --- a/drivers/iio/orientation/Kconfig
> > +++ b/drivers/iio/orientation/Kconfig
> > @@ -9,7 +9,6 @@ menu "Inclinometer sensors"
> >  config HID_SENSOR_INCLINOMETER_3D
> >  	depends on HID_SENSOR_HUB
> >  	select IIO_BUFFER
> > -	select IIO_TRIGGERED_BUFFER
> >  	select HID_SENSOR_IIO_COMMON
> >  	select HID_SENSOR_IIO_TRIGGER
> >  	tristate "HID Inclinometer 3D"
> > @@ -20,7 +19,6 @@ config HID_SENSOR_INCLINOMETER_3D
> >  config HID_SENSOR_DEVICE_ROTATION
> >  	depends on HID_SENSOR_HUB
> >  	select IIO_BUFFER
> > -	select IIO_TRIGGERED_BUFFER
> >  	select HID_SENSOR_IIO_COMMON
> >  	select HID_SENSOR_IIO_TRIGGER
> >  	tristate "HID Device Rotation"
> > diff --git a/drivers/iio/pressure/Kconfig
> > b/drivers/iio/pressure/Kconfig
> > index 689b978db4f9..fc0d3cfca418 100644
> > --- a/drivers/iio/pressure/Kconfig
> > +++ b/drivers/iio/pressure/Kconfig
> > @@ -79,7 +79,6 @@ config DPS310
> >  config HID_SENSOR_PRESS
> >  	depends on HID_SENSOR_HUB
> >  	select IIO_BUFFER
> > -	select IIO_TRIGGERED_BUFFER
> >  	select HID_SENSOR_IIO_COMMON
> >  	select HID_SENSOR_IIO_TRIGGER
> >  	tristate "HID PRESS"
> > diff --git a/drivers/iio/temperature/Kconfig
> > b/drivers/iio/temperature/Kconfig
> > index c5482983f568..f20ae3c963cb 100644
> > --- a/drivers/iio/temperature/Kconfig
> > +++ b/drivers/iio/temperature/Kconfig
> > @@ -45,7 +45,6 @@ config HID_SENSOR_TEMP
> >  	tristate "HID Environmental temperature sensor"
> >  	depends on HID_SENSOR_HUB
> >  	select IIO_BUFFER
> > -	select IIO_TRIGGERED_BUFFER
> >  	select HID_SENSOR_IIO_COMMON
> >  	select HID_SENSOR_IIO_TRIGGER
> >  	help  
>
diff mbox series

Patch

diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig
index cceda3cecbcf..8b1723635cce 100644
--- a/drivers/iio/accel/Kconfig
+++ b/drivers/iio/accel/Kconfig
@@ -229,7 +229,6 @@  config DMARD10
 config HID_SENSOR_ACCEL_3D
 	depends on HID_SENSOR_HUB
 	select IIO_BUFFER
-	select IIO_TRIGGERED_BUFFER
 	select HID_SENSOR_IIO_COMMON
 	select HID_SENSOR_IIO_TRIGGER
 	tristate "HID Accelerometers 3D"
diff --git a/drivers/iio/common/hid-sensors/Kconfig b/drivers/iio/common/hid-sensors/Kconfig
index 24d492567336..2a3dd3b907be 100644
--- a/drivers/iio/common/hid-sensors/Kconfig
+++ b/drivers/iio/common/hid-sensors/Kconfig
@@ -19,6 +19,7 @@  config HID_SENSOR_IIO_TRIGGER
 	tristate "Common module (trigger) for all HID Sensor IIO drivers"
 	depends on HID_SENSOR_HUB && HID_SENSOR_IIO_COMMON && IIO_BUFFER
 	select IIO_TRIGGER
+	select IIO_TRIGGERED_BUFFER
 	help
 	  Say yes here to build trigger support for HID sensors.
 	  Triggers will be send if all requested attributes were read.
diff --git a/drivers/iio/gyro/Kconfig b/drivers/iio/gyro/Kconfig
index 5824f2edf975..20b5ac7ab66a 100644
--- a/drivers/iio/gyro/Kconfig
+++ b/drivers/iio/gyro/Kconfig
@@ -111,7 +111,6 @@  config FXAS21002C_SPI
 config HID_SENSOR_GYRO_3D
 	depends on HID_SENSOR_HUB
 	select IIO_BUFFER
-	select IIO_TRIGGERED_BUFFER
 	select HID_SENSOR_IIO_COMMON
 	select HID_SENSOR_IIO_TRIGGER
 	tristate "HID Gyroscope 3D"
diff --git a/drivers/iio/humidity/Kconfig b/drivers/iio/humidity/Kconfig
index 6549fcf6db69..2de5494e7c22 100644
--- a/drivers/iio/humidity/Kconfig
+++ b/drivers/iio/humidity/Kconfig
@@ -52,7 +52,6 @@  config HID_SENSOR_HUMIDITY
 	tristate "HID Environmental humidity sensor"
 	depends on HID_SENSOR_HUB
 	select IIO_BUFFER
-	select IIO_TRIGGERED_BUFFER
 	select HID_SENSOR_IIO_COMMON
 	select HID_SENSOR_IIO_TRIGGER
 	help
diff --git a/drivers/iio/light/Kconfig b/drivers/iio/light/Kconfig
index 33ad4dd0b5c7..917f9becf9c7 100644
--- a/drivers/iio/light/Kconfig
+++ b/drivers/iio/light/Kconfig
@@ -256,7 +256,6 @@  config ISL29125
 config HID_SENSOR_ALS
 	depends on HID_SENSOR_HUB
 	select IIO_BUFFER
-	select IIO_TRIGGERED_BUFFER
 	select HID_SENSOR_IIO_COMMON
 	select HID_SENSOR_IIO_TRIGGER
 	tristate "HID ALS"
@@ -270,7 +269,6 @@  config HID_SENSOR_ALS
 config HID_SENSOR_PROX
 	depends on HID_SENSOR_HUB
 	select IIO_BUFFER
-	select IIO_TRIGGERED_BUFFER
 	select HID_SENSOR_IIO_COMMON
 	select HID_SENSOR_IIO_TRIGGER
 	tristate "HID PROX"
diff --git a/drivers/iio/magnetometer/Kconfig b/drivers/iio/magnetometer/Kconfig
index 5d4ffd66032e..74ad5701c6c2 100644
--- a/drivers/iio/magnetometer/Kconfig
+++ b/drivers/iio/magnetometer/Kconfig
@@ -95,7 +95,6 @@  config MAG3110
 config HID_SENSOR_MAGNETOMETER_3D
 	depends on HID_SENSOR_HUB
 	select IIO_BUFFER
-	select IIO_TRIGGERED_BUFFER
 	select HID_SENSOR_IIO_COMMON
 	select HID_SENSOR_IIO_TRIGGER
 	tristate "HID Magenetometer 3D"
diff --git a/drivers/iio/orientation/Kconfig b/drivers/iio/orientation/Kconfig
index a505583cc2fd..396cbbb867f4 100644
--- a/drivers/iio/orientation/Kconfig
+++ b/drivers/iio/orientation/Kconfig
@@ -9,7 +9,6 @@  menu "Inclinometer sensors"
 config HID_SENSOR_INCLINOMETER_3D
 	depends on HID_SENSOR_HUB
 	select IIO_BUFFER
-	select IIO_TRIGGERED_BUFFER
 	select HID_SENSOR_IIO_COMMON
 	select HID_SENSOR_IIO_TRIGGER
 	tristate "HID Inclinometer 3D"
@@ -20,7 +19,6 @@  config HID_SENSOR_INCLINOMETER_3D
 config HID_SENSOR_DEVICE_ROTATION
 	depends on HID_SENSOR_HUB
 	select IIO_BUFFER
-	select IIO_TRIGGERED_BUFFER
 	select HID_SENSOR_IIO_COMMON
 	select HID_SENSOR_IIO_TRIGGER
 	tristate "HID Device Rotation"
diff --git a/drivers/iio/pressure/Kconfig b/drivers/iio/pressure/Kconfig
index 689b978db4f9..fc0d3cfca418 100644
--- a/drivers/iio/pressure/Kconfig
+++ b/drivers/iio/pressure/Kconfig
@@ -79,7 +79,6 @@  config DPS310
 config HID_SENSOR_PRESS
 	depends on HID_SENSOR_HUB
 	select IIO_BUFFER
-	select IIO_TRIGGERED_BUFFER
 	select HID_SENSOR_IIO_COMMON
 	select HID_SENSOR_IIO_TRIGGER
 	tristate "HID PRESS"
diff --git a/drivers/iio/temperature/Kconfig b/drivers/iio/temperature/Kconfig
index c5482983f568..f20ae3c963cb 100644
--- a/drivers/iio/temperature/Kconfig
+++ b/drivers/iio/temperature/Kconfig
@@ -45,7 +45,6 @@  config HID_SENSOR_TEMP
 	tristate "HID Environmental temperature sensor"
 	depends on HID_SENSOR_HUB
 	select IIO_BUFFER
-	select IIO_TRIGGERED_BUFFER
 	select HID_SENSOR_IIO_COMMON
 	select HID_SENSOR_IIO_TRIGGER
 	help