| Message ID | 20210429122806.3814330-2-sean@geanix.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [v4,1/6] iio: accel: add support for FXLS8962AF/FXLS8964AF accelerometers | expand |
On Thu, 29 Apr 2021 14:28:02 +0200, Sean Nyekjaer wrote: > Add devicetree binding for the NXP FXLS8962AF/FXLS8964AF > accelerometer sensor. > > Signed-off-by: Sean Nyekjaer <sean@geanix.com> > --- > Changes for v2: > - removed requirement for interrupt > > Changes for v3: > - None > > Changes for v4: > - Included the dt patch from the RFC > > .../bindings/iio/accel/nxp,fxls8962af.yaml | 82 +++++++++++++++++++ > 1 file changed, 82 insertions(+) > create mode 100644 Documentation/devicetree/bindings/iio/accel/nxp,fxls8962af.yaml > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: dtschema/dtc warnings/errors: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/iio/accel/nxp,fxls8962af.yaml: properties:interrupt-names:items: {'enum': ['INT1', 'INT2']} is not of type 'array' /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/iio/accel/nxp,fxls8962af.yaml: ignoring, error in schema: properties: interrupt-names: items warning: no schema found in file: ./Documentation/devicetree/bindings/iio/accel/nxp,fxls8962af.yaml Documentation/devicetree/bindings/iio/accel/nxp,fxls8962af.example.dt.yaml:0:0: /example-0/i2c0/accelerometer@62: failed to match any schema with compatible: ['nxp,fxls8962af'] Documentation/devicetree/bindings/iio/accel/nxp,fxls8962af.example.dt.yaml:0:0: /example-1/spi0/accelerometer@0: failed to match any schema with compatible: ['nxp,fxls8962af'] See https://patchwork.ozlabs.org/patch/1471682 This check can fail if there are any dependencies. The base for a patch series is generally the most recent rc1. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit.
diff --git a/Documentation/devicetree/bindings/iio/accel/nxp,fxls8962af.yaml b/Documentation/devicetree/bindings/iio/accel/nxp,fxls8962af.yaml new file mode 100644 index 000000000000..e0e5542377df --- /dev/null +++ b/Documentation/devicetree/bindings/iio/accel/nxp,fxls8962af.yaml @@ -0,0 +1,82 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/accel/nxp,fxls8962af.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP FXLS8962AF/FXLS8964AF Accelerometer driver + +maintainers: + - Sean Nyekjaer <sean@geanix.com> + +description: | + NXP FXLS8962AF/FXLS8964AF Accelerometer driver that supports + SPI and I2C interface. + https://www.nxp.com/docs/en/data-sheet/FXLS8962AF.pdf + https://www.nxp.com/docs/en/data-sheet/FXLS8964AF.pdf + +properties: + compatible: + enum: + - nxp,fxls8962af + - nxp,fxls8964af + + reg: + maxItems: 1 + + vdd-supply: + description: phandle to the regulator that provides power to the accelerometer + + spi-max-frequency: true + + interrupts: + maxItems: 1 + + interrupt-names: + maxItems: 1 + items: + enum: + - INT1 + - INT2 + + drive-open-drain: + type: boolean + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + + /* Example for a I2C device node */ + accelerometer@62 { + compatible = "nxp,fxls8962af"; + reg = <0x62>; + interrupt-parent = <&gpio0>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "INT1"; + }; + }; + - | + #include <dt-bindings/interrupt-controller/irq.h> + spi0 { + #address-cells = <1>; + #size-cells = <0>; + + /* Example for a SPI device node */ + accelerometer@0 { + compatible = "nxp,fxls8962af"; + reg = <0>; + spi-max-frequency = <4000000>; + interrupt-parent = <&gpio0>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "INT1"; + }; + };
Add devicetree binding for the NXP FXLS8962AF/FXLS8964AF accelerometer sensor. Signed-off-by: Sean Nyekjaer <sean@geanix.com> --- Changes for v2: - removed requirement for interrupt Changes for v3: - None Changes for v4: - Included the dt patch from the RFC .../bindings/iio/accel/nxp,fxls8962af.yaml | 82 +++++++++++++++++++ 1 file changed, 82 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/accel/nxp,fxls8962af.yaml