diff mbox series

[v3,03/12] iio: adc: ad7192: Avoid disabling a clock that was never enabled.

Message ID 20210512174914.10549-4-aardelean@deviqon.com (mailing list archive)
State Superseded
Headers show
Series ad_sigma_delta: convert all drivers to device-managed | expand

Commit Message

Alexandru Ardelean May 12, 2021, 5:49 p.m. UTC 
From: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Found by inspection.

If the internal clock source is being used, the driver doesn't
call clk_prepare_enable() and as such we should not call
clk_disable_unprepare()

Use the same condition to protect the disable path as is used
on the enable one.  Note this will all get simplified when
the driver moves over to a full devm_ flow, but that would make
backporting the fix harder.

Fix obviously predates move out of staging, but backporting will
become more complex (and is unlikely to happen), hence that patch
is given in the fixes tag.

Fixes: b581f748cce0 ("staging: iio: adc: ad7192: move out of staging")
Cc: Alexandru Tachici <alexandru.tachici@analog.com>
Reviewed-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com>
---
 drivers/iio/adc/ad7192.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/drivers/iio/adc/ad7192.c b/drivers/iio/adc/ad7192.c
index 2ed580521d81..d3be67aa0522 100644
--- a/drivers/iio/adc/ad7192.c
+++ b/drivers/iio/adc/ad7192.c
@@ -1014,7 +1014,9 @@  static int ad7192_probe(struct spi_device *spi)
 	return 0;
 
 error_disable_clk:
-	clk_disable_unprepare(st->mclk);
+	if (st->clock_sel == AD7192_CLK_EXT_MCLK1_2 ||
+	    st->clock_sel == AD7192_CLK_EXT_MCLK2)
+		clk_disable_unprepare(st->mclk);
 error_remove_trigger:
 	ad_sd_cleanup_buffer_and_trigger(indio_dev);
 error_disable_dvdd:
@@ -1031,7 +1033,9 @@  static int ad7192_remove(struct spi_device *spi)
 	struct ad7192_state *st = iio_priv(indio_dev);
 
 	iio_device_unregister(indio_dev);
-	clk_disable_unprepare(st->mclk);
+	if (st->clock_sel == AD7192_CLK_EXT_MCLK1_2 ||
+	    st->clock_sel == AD7192_CLK_EXT_MCLK2)
+		clk_disable_unprepare(st->mclk);
 	ad_sd_cleanup_buffer_and_trigger(indio_dev);
 
 	regulator_disable(st->dvdd);