@@ -193,6 +193,17 @@ static bool tmp006_check_identification(struct i2c_client *client)
return mid == TMP006_MANUFACTURER_MAGIC && did == TMP006_DEVICE_MAGIC;
}
+static int tmp006_powerdown(struct tmp006_data *data)
+{
+ return i2c_smbus_write_word_swapped(data->client, TMP006_CONFIG,
+ data->config & ~TMP006_CONFIG_MOD_MASK);
+}
+
+static void tmp006_powerdown_cleanup(void *data)
+{
+ tmp006_powerdown(data);
+}
+
static int tmp006_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
@@ -228,23 +239,11 @@ static int tmp006_probe(struct i2c_client *client,
return ret;
data->config = ret;
- return iio_device_register(indio_dev);
-}
-
-static int tmp006_powerdown(struct tmp006_data *data)
-{
- return i2c_smbus_write_word_swapped(data->client, TMP006_CONFIG,
- data->config & ~TMP006_CONFIG_MOD_MASK);
-}
-
-static int tmp006_remove(struct i2c_client *client)
-{
- struct iio_dev *indio_dev = i2c_get_clientdata(client);
-
- iio_device_unregister(indio_dev);
- tmp006_powerdown(iio_priv(indio_dev));
+ ret = devm_add_action(&client->dev, tmp006_powerdown_cleanup, data);
+ if (ret < 0)
+ return ret;
- return 0;
+ return devm_iio_device_register(&client->dev, indio_dev);
}
#ifdef CONFIG_PM_SLEEP
@@ -277,7 +276,6 @@ static struct i2c_driver tmp006_driver = {
.pm = &tmp006_pm_ops,
},
.probe = tmp006_probe,
- .remove = tmp006_remove,
.id_table = tmp006_id,
};
module_i2c_driver(tmp006_driver);
This change converts the driver to register via devm_iio_device_register(). For the tmp006_powerdown() hook, this uses a devm_add_action() hook to put the device in powerdown mode when it's unregistered. With these changes, the remove hook can be removed. The i2c_set_clientdata() call is staying around as the private data is used in the PM routines. Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com> --- drivers/iio/temperature/tmp006.c | 32 +++++++++++++++----------------- 1 file changed, 15 insertions(+), 17 deletions(-)