@@ -1,8 +1,9 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
- * Aspeed AST2400/2500 ADC
+ * Aspeed AST2400/2500/2600 ADC
*
* Copyright (C) 2017 Google, Inc.
+ * Copyright (C) 2021 Aspeed Technology Inc.
*/
#include <linux/clk.h>
@@ -55,12 +56,17 @@
#define ASPEED_ADC_INIT_POLLING_TIME 500
#define ASPEED_ADC_INIT_TIMEOUT 500000
+enum aspeed_adc_version {
+ aspeed_adc_ast2400,
+ aspeed_adc_ast2500,
+ aspeed_adc_ast2600,
+};
struct aspeed_adc_model_data {
- const char *model_name;
+ enum aspeed_adc_version version;
unsigned int min_sampling_rate; // Hz
unsigned int max_sampling_rate; // Hz
- unsigned int vref_voltage; // mV
bool wait_init_sequence;
+ unsigned int num_channels;
};
struct aspeed_adc_data {
@@ -70,6 +76,7 @@ struct aspeed_adc_data {
struct clk_hw *clk_prescaler;
struct clk_hw *clk_scaler;
struct reset_control *rst;
+ int vref;
};
#define ASPEED_CHAN(_idx, _data_reg_addr) { \
@@ -106,8 +113,6 @@ static int aspeed_adc_read_raw(struct iio_dev *indio_dev,
int *val, int *val2, long mask)
{
struct aspeed_adc_data *data = iio_priv(indio_dev);
- const struct aspeed_adc_model_data *model_data =
- of_device_get_match_data(data->dev);
switch (mask) {
case IIO_CHAN_INFO_RAW:
@@ -115,7 +120,7 @@ static int aspeed_adc_read_raw(struct iio_dev *indio_dev,
return IIO_VAL_INT;
case IIO_CHAN_INFO_SCALE:
- *val = model_data->vref_voltage;
+ *val = data->vref;
*val2 = ASPEED_RESOLUTION_BITS;
return IIO_VAL_FRACTIONAL_LOG2;
@@ -182,6 +187,55 @@ static const struct iio_info aspeed_adc_iio_info = {
.debugfs_reg_access = aspeed_adc_reg_access,
};
+static int aspeed_adc_vref_config(struct platform_device *pdev)
+{
+ const struct aspeed_adc_model_data *model_data;
+ struct iio_dev *indio_dev = platform_get_drvdata(pdev);
+ struct aspeed_adc_data *data = iio_priv(indio_dev);
+ int vref;
+ u32 adc_engine_control_reg_val =
+ readl(data->base + ASPEED_REG_ENGINE_CONTROL);
+
+ model_data = of_device_get_match_data(&pdev->dev);
+ switch (model_data->version) {
+ case aspeed_adc_ast2400:
+ vref = 2500;
+ break;
+ case aspeed_adc_ast2500:
+ vref = 1800;
+ break;
+ case aspeed_adc_ast2600:
+ if (of_property_read_u32(pdev->dev.of_node, "vref", &vref))
+ vref = 2500;
+ if (vref == 2500)
+ writel(adc_engine_control_reg_val |
+ ASPEED_ADC_REF_VOLTAGE_2500mV,
+ data->base + ASPEED_REG_ENGINE_CONTROL);
+ else if (vref == 1200)
+ writel(adc_engine_control_reg_val |
+ ASPEED_ADC_REF_VOLTAGE_1200mV,
+ data->base + ASPEED_REG_ENGINE_CONTROL);
+ else if ((vref >= 1550) && (vref <= 2700))
+ writel(adc_engine_control_reg_val |
+ ASPEED_ADC_REF_VOLTAGE_EXT_HIGH,
+ data->base + ASPEED_REG_ENGINE_CONTROL);
+ else if ((vref >= 900) && (vref <= 1650))
+ writel(adc_engine_control_reg_val |
+ ASPEED_ADC_REF_VOLTAGE_EXT_LOW,
+ data->base + ASPEED_REG_ENGINE_CONTROL);
+ else {
+ dev_err(&pdev->dev, "Vref not support");
+ return -EOPNOTSUPP;
+ }
+ break;
+ default:
+ dev_err(&pdev->dev, "ADC version not recognized");
+ return -EOPNOTSUPP;
+ }
+ data->vref = vref;
+ return 0;
+}
+
static int aspeed_adc_probe(struct platform_device *pdev)
{
struct iio_dev *indio_dev;
@@ -190,13 +244,16 @@ static int aspeed_adc_probe(struct platform_device *pdev)
const char *clk_parent_name;
int ret;
u32 adc_engine_control_reg_val;
+ char scaler_clk_name[32];
+ model_data = of_device_get_match_data(&pdev->dev);
indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*data));
if (!indio_dev)
return -ENOMEM;
data = iio_priv(indio_dev);
data->dev = &pdev->dev;
+ dev_set_drvdata(data->dev, indio_dev);
data->base = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(data->base))
@@ -205,29 +262,39 @@ static int aspeed_adc_probe(struct platform_device *pdev)
/* Register ADC clock prescaler with source specified by device tree. */
spin_lock_init(&data->clk_lock);
clk_parent_name = of_clk_get_parent_name(pdev->dev.of_node, 0);
+ if (model_data->version <= aspeed_adc_ast2500) {
+ data->clk_prescaler = clk_hw_register_divider(
+ &pdev->dev, "prescaler", clk_parent_name, 0,
+ data->base + ASPEED_REG_CLOCK_CONTROL,
+ 17, 15, 0, &data->clk_lock);
+ if (IS_ERR(data->clk_prescaler))
+ return PTR_ERR(data->clk_prescaler);
- data->clk_prescaler = clk_hw_register_divider(
- &pdev->dev, "prescaler", clk_parent_name, 0,
- data->base + ASPEED_REG_CLOCK_CONTROL,
- 17, 15, 0, &data->clk_lock);
- if (IS_ERR(data->clk_prescaler))
- return PTR_ERR(data->clk_prescaler);
-
- /*
- * Register ADC clock scaler downstream from the prescaler. Allow rate
- * setting to adjust the prescaler as well.
- */
- data->clk_scaler = clk_hw_register_divider(
- &pdev->dev, "scaler", "prescaler",
- CLK_SET_RATE_PARENT,
- data->base + ASPEED_REG_CLOCK_CONTROL,
- 0, 10, 0, &data->clk_lock);
- if (IS_ERR(data->clk_scaler)) {
- ret = PTR_ERR(data->clk_scaler);
- goto scaler_error;
+ /*
+ * Register ADC clock scaler downstream from the prescaler. Allow rate
+ * setting to adjust the prescaler as well.
+ */
+ data->clk_scaler = clk_hw_register_divider(
+ &pdev->dev, "scaler", "prescaler",
+ CLK_SET_RATE_PARENT,
+ data->base + ASPEED_REG_CLOCK_CONTROL,
+ 0, 10, 0, &data->clk_lock);
+ if (IS_ERR(data->clk_scaler)) {
+ ret = PTR_ERR(data->clk_scaler);
+ goto scaler_error;
+ }
+ } else {
+ snprintf(scaler_clk_name, sizeof(scaler_clk_name), "scaler-%s",
+ pdev->name);
+ data->clk_scaler = clk_hw_register_divider(
+ &pdev->dev, scaler_clk_name, clk_parent_name, 0,
+ data->base + ASPEED_REG_CLOCK_CONTROL, 0, 16, 0,
+ &data->clk_lock);
+ if (IS_ERR(data->clk_scaler))
+ return PTR_ERR(data->clk_scaler);
}
- data->rst = devm_reset_control_get_exclusive(&pdev->dev, NULL);
+ data->rst = devm_reset_control_get_shared(&pdev->dev, NULL);
if (IS_ERR(data->rst)) {
dev_err(&pdev->dev,
"invalid or missing reset controller device tree entry");
@@ -236,8 +303,6 @@ static int aspeed_adc_probe(struct platform_device *pdev)
}
reset_control_deassert(data->rst);
- model_data = of_device_get_match_data(&pdev->dev);
-
if (model_data->wait_init_sequence) {
/* Enable engine in normal mode. */
writel(ASPEED_ADC_OPERATION_MODE_NORMAL | ASPEED_ADC_ENGINE_ENABLE,
@@ -254,22 +319,26 @@ static int aspeed_adc_probe(struct platform_device *pdev)
goto poll_timeout_error;
}
- /* Start all channels in normal mode. */
+ ret = aspeed_adc_vref_config(pdev);
+ if (ret)
+ goto vref_config_error;
ret = clk_prepare_enable(data->clk_scaler->clk);
if (ret)
goto clk_enable_error;
-
- adc_engine_control_reg_val = GENMASK(31, 16) |
- ASPEED_ADC_OPERATION_MODE_NORMAL | ASPEED_ADC_ENGINE_ENABLE;
+ adc_engine_control_reg_val =
+ readl(data->base + ASPEED_REG_ENGINE_CONTROL);
+ /* Start all channels in normal mode. */
+ adc_engine_control_reg_val |= ASPEED_ADC_CTRL_CHANNEL |
+ ASPEED_ADC_OPERATION_MODE_NORMAL |
+ ASPEED_ADC_ENGINE_ENABLE;
writel(adc_engine_control_reg_val,
data->base + ASPEED_REG_ENGINE_CONTROL);
- model_data = of_device_get_match_data(&pdev->dev);
- indio_dev->name = model_data->model_name;
+ indio_dev->name = dev_name(&pdev->dev);
indio_dev->info = &aspeed_adc_iio_info;
indio_dev->modes = INDIO_DIRECT_MODE;
indio_dev->channels = aspeed_adc_iio_channels;
- indio_dev->num_channels = ARRAY_SIZE(aspeed_adc_iio_channels);
+ indio_dev->num_channels = model_data->num_channels;
ret = iio_device_register(indio_dev);
if (ret)
@@ -281,13 +350,15 @@ static int aspeed_adc_probe(struct platform_device *pdev)
writel(ASPEED_ADC_OPERATION_MODE_POWER_DOWN,
data->base + ASPEED_REG_ENGINE_CONTROL);
clk_disable_unprepare(data->clk_scaler->clk);
+vref_config_error:
clk_enable_error:
poll_timeout_error:
reset_control_assert(data->rst);
reset_error:
clk_hw_unregister_divider(data->clk_scaler);
scaler_error:
- clk_hw_unregister_divider(data->clk_prescaler);
+ if (model_data->version <= aspeed_adc_ast2500)
+ clk_hw_unregister_divider(data->clk_prescaler);
return ret;
}
@@ -295,36 +366,48 @@ static int aspeed_adc_remove(struct platform_device *pdev)
{
struct iio_dev *indio_dev = platform_get_drvdata(pdev);
struct aspeed_adc_data *data = iio_priv(indio_dev);
+ const struct aspeed_adc_model_data *model_data;
+ model_data = of_device_get_match_data(&pdev->dev);
iio_device_unregister(indio_dev);
writel(ASPEED_ADC_OPERATION_MODE_POWER_DOWN,
data->base + ASPEED_REG_ENGINE_CONTROL);
clk_disable_unprepare(data->clk_scaler->clk);
reset_control_assert(data->rst);
clk_hw_unregister_divider(data->clk_scaler);
- clk_hw_unregister_divider(data->clk_prescaler);
+ if (model_data->version <= aspeed_adc_ast2500)
+ clk_hw_unregister_divider(data->clk_prescaler);
return 0;
}
static const struct aspeed_adc_model_data ast2400_model_data = {
- .model_name = "ast2400-adc",
- .vref_voltage = 2500, // mV
+ .version = aspeed_adc_ast2400,
.min_sampling_rate = 10000,
.max_sampling_rate = 500000,
+ .num_channels = 16,
};
static const struct aspeed_adc_model_data ast2500_model_data = {
- .model_name = "ast2500-adc",
- .vref_voltage = 1800, // mV
- .min_sampling_rate = 1,
- .max_sampling_rate = 1000000,
+ .version = aspeed_adc_ast2500,
+ .min_sampling_rate = 10000,
+ .max_sampling_rate = 500000,
+ .wait_init_sequence = true,
+ .num_channels = 16,
+};
+
+static const struct aspeed_adc_model_data ast2600_model_data = {
+ .version = aspeed_adc_ast2600,
+ .min_sampling_rate = 10000,
+ .max_sampling_rate = 500000,
.wait_init_sequence = true,
+ .num_channels = 8,
};
static const struct of_device_id aspeed_adc_matches[] = {
{ .compatible = "aspeed,ast2400-adc", .data = &ast2400_model_data },
{ .compatible = "aspeed,ast2500-adc", .data = &ast2500_model_data },
+ { .compatible = "aspeed,ast2600-adc", .data = &ast2600_model_data },
{},
};
MODULE_DEVICE_TABLE(of, aspeed_adc_matches);
@@ -341,5 +424,5 @@ static struct platform_driver aspeed_adc_driver = {
module_platform_driver(aspeed_adc_driver);
MODULE_AUTHOR("Rick Altherr <raltherr@google.com>");
-MODULE_DESCRIPTION("Aspeed AST2400/2500 ADC Driver");
+MODULE_DESCRIPTION("Aspeed AST2400/2500/2600 ADC Driver");
MODULE_LICENSE("GPL");
The adc controller have some differents at ast2600: 1. Combine control register of clock divider to continuous bitfields. 2. Reference voltage becomes optional which are internal 2500mv/1200mv and external range from 900mv to 2700mv 3. Divided into two engine, each one has 8 voltage sensing channels. This patch handled these changes and compatible with old version. Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com> --- drivers/iio/adc/aspeed_adc.c | 171 ++++++++++++++++++++++++++--------- 1 file changed, 127 insertions(+), 44 deletions(-)