diff mbox series

[v3,5/5] iio: st_sensors: remove reference to parent device object on st_sensor_data

Message ID 20210823112204.243255-6-aardelean@deviqon.com (mailing list archive)
State Accepted
Headers show
Series iio: st_sensors: convert probe functions to full devm | expand

Commit Message

Alexandru Ardelean Aug. 23, 2021, 11:22 a.m. UTC 
The idea behind it, is that all devm_ calls in ST sensors are bound to the
parent device object.

However, the reference to that object is kept on both the st_sensor_data
struct and the IIO object parent (indio_dev->dev.parent).

This change only adds a bit consistency and uses the reference stored on
indio_dev->dev.parent, to enforce the assumption that all ST sensors' devm_
calls are bound to the same reference as the one store on st_sensor_data.

Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com>
---
 drivers/iio/accel/st_accel_core.c                  | 6 +++---
 drivers/iio/common/st_sensors/st_sensors_i2c.c     | 1 -
 drivers/iio/common/st_sensors/st_sensors_spi.c     | 1 -
 drivers/iio/common/st_sensors/st_sensors_trigger.c | 8 +++++---
 drivers/iio/gyro/st_gyro_core.c                    | 2 +-
 drivers/iio/imu/st_lsm9ds0/st_lsm9ds0_core.c       | 2 --
 drivers/iio/magnetometer/st_magn_core.c            | 4 ++--
 drivers/iio/pressure/st_pressure_core.c            | 2 +-
 include/linux/iio/common/st_sensors.h              | 2 --
 9 files changed, 12 insertions(+), 16 deletions(-)

Comments

Linus Walleij Aug. 27, 2021, 10:35 p.m. UTC | #1 
On Mon, Aug 23, 2021 at 1:22 PM Alexandru Ardelean
<aardelean@deviqon.com> wrote:

> The idea behind it, is that all devm_ calls in ST sensors are bound to the
> parent device object.
>
> However, the reference to that object is kept on both the st_sensor_data
> struct and the IIO object parent (indio_dev->dev.parent).
>
> This change only adds a bit consistency and uses the reference stored on
> indio_dev->dev.parent, to enforce the assumption that all ST sensors' devm_
> calls are bound to the same reference as the one store on st_sensor_data.
>
> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
> Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com>

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

Yours,
Linus Walleij
diff mbox series

Patch

diff --git a/drivers/iio/accel/st_accel_core.c b/drivers/iio/accel/st_accel_core.c
index 01695abd9d2f..31ea19d0ba71 100644
--- a/drivers/iio/accel/st_accel_core.c
+++ b/drivers/iio/accel/st_accel_core.c
@@ -1210,7 +1210,7 @@  static int apply_acpi_orientation(struct iio_dev *indio_dev)
 	};
 
 
-	adev = ACPI_COMPANION(adata->dev);
+	adev = ACPI_COMPANION(indio_dev->dev.parent);
 	if (!adev)
 		return 0;
 
@@ -1334,8 +1334,8 @@  EXPORT_SYMBOL(st_accel_get_settings);
 int st_accel_common_probe(struct iio_dev *indio_dev)
 {
 	struct st_sensor_data *adata = iio_priv(indio_dev);
-	struct st_sensors_platform_data *pdata = dev_get_platdata(adata->dev);
 	struct device *parent = indio_dev->dev.parent;
+	struct st_sensors_platform_data *pdata = dev_get_platdata(parent);
 	int err;
 
 	indio_dev->modes = INDIO_DIRECT_MODE;
@@ -1355,7 +1355,7 @@  int st_accel_common_probe(struct iio_dev *indio_dev)
 	 */
 	err = apply_acpi_orientation(indio_dev);
 	if (err) {
-		err = iio_read_mount_matrix(adata->dev, &adata->mount_matrix);
+		err = iio_read_mount_matrix(parent, &adata->mount_matrix);
 		if (err)
 			return err;
 	}
diff --git a/drivers/iio/common/st_sensors/st_sensors_i2c.c b/drivers/iio/common/st_sensors/st_sensors_i2c.c
index b3ff88700866..18bd3c3d99bc 100644
--- a/drivers/iio/common/st_sensors/st_sensors_i2c.c
+++ b/drivers/iio/common/st_sensors/st_sensors_i2c.c
@@ -57,7 +57,6 @@  int st_sensors_i2c_configure(struct iio_dev *indio_dev,
 
 	indio_dev->name = client->name;
 
-	sdata->dev = &client->dev;
 	sdata->irq = client->irq;
 
 	return 0;
diff --git a/drivers/iio/common/st_sensors/st_sensors_spi.c b/drivers/iio/common/st_sensors/st_sensors_spi.c
index 0d1d66c77cd8..7c60050e90dc 100644
--- a/drivers/iio/common/st_sensors/st_sensors_spi.c
+++ b/drivers/iio/common/st_sensors/st_sensors_spi.c
@@ -109,7 +109,6 @@  int st_sensors_spi_configure(struct iio_dev *indio_dev,
 
 	indio_dev->name = spi->modalias;
 
-	sdata->dev = &spi->dev;
 	sdata->irq = spi->irq;
 
 	return 0;
diff --git a/drivers/iio/common/st_sensors/st_sensors_trigger.c b/drivers/iio/common/st_sensors/st_sensors_trigger.c
index d022157b66a2..392d74449886 100644
--- a/drivers/iio/common/st_sensors/st_sensors_trigger.c
+++ b/drivers/iio/common/st_sensors/st_sensors_trigger.c
@@ -42,7 +42,8 @@  static bool st_sensors_new_samples_available(struct iio_dev *indio_dev,
 			  sdata->sensor_settings->drdy_irq.stat_drdy.addr,
 			  &status);
 	if (ret < 0) {
-		dev_err(sdata->dev, "error checking samples available\n");
+		dev_err(indio_dev->dev.parent,
+			"error checking samples available\n");
 		return false;
 	}
 
@@ -87,7 +88,7 @@  static irqreturn_t st_sensors_irq_thread(int irq, void *p)
 	    st_sensors_new_samples_available(indio_dev, sdata)) {
 		iio_trigger_poll_chained(p);
 	} else {
-		dev_dbg(sdata->dev, "spurious IRQ\n");
+		dev_dbg(indio_dev->dev.parent, "spurious IRQ\n");
 		return IRQ_NONE;
 	}
 
@@ -107,7 +108,8 @@  static irqreturn_t st_sensors_irq_thread(int irq, void *p)
 	 */
 	while (sdata->hw_irq_trigger &&
 	       st_sensors_new_samples_available(indio_dev, sdata)) {
-		dev_dbg(sdata->dev, "more samples came in during polling\n");
+		dev_dbg(indio_dev->dev.parent,
+			"more samples came in during polling\n");
 		sdata->hw_timestamp = iio_get_time_ns(indio_dev);
 		iio_trigger_poll_chained(p);
 	}
diff --git a/drivers/iio/gyro/st_gyro_core.c b/drivers/iio/gyro/st_gyro_core.c
index 3609082a6778..201050b76fe5 100644
--- a/drivers/iio/gyro/st_gyro_core.c
+++ b/drivers/iio/gyro/st_gyro_core.c
@@ -492,7 +492,7 @@  int st_gyro_common_probe(struct iio_dev *indio_dev)
 	indio_dev->channels = gdata->sensor_settings->ch;
 	indio_dev->num_channels = ST_SENSORS_NUMBER_ALL_CHANNELS;
 
-	err = iio_read_mount_matrix(gdata->dev, &gdata->mount_matrix);
+	err = iio_read_mount_matrix(parent, &gdata->mount_matrix);
 	if (err)
 		return err;
 
diff --git a/drivers/iio/imu/st_lsm9ds0/st_lsm9ds0_core.c b/drivers/iio/imu/st_lsm9ds0/st_lsm9ds0_core.c
index d276f663fe57..b3a43a3b04ff 100644
--- a/drivers/iio/imu/st_lsm9ds0/st_lsm9ds0_core.c
+++ b/drivers/iio/imu/st_lsm9ds0/st_lsm9ds0_core.c
@@ -90,7 +90,6 @@  static int st_lsm9ds0_probe_accel(struct st_lsm9ds0 *lsm9ds0, struct regmap *reg
 
 	data = iio_priv(lsm9ds0->accel);
 	data->sensor_settings = (struct st_sensor_settings *)settings;
-	data->dev = dev;
 	data->irq = lsm9ds0->irq;
 	data->regmap = regmap;
 	data->vdd = lsm9ds0->vdd;
@@ -119,7 +118,6 @@  static int st_lsm9ds0_probe_magn(struct st_lsm9ds0 *lsm9ds0, struct regmap *regm
 
 	data = iio_priv(lsm9ds0->magn);
 	data->sensor_settings = (struct st_sensor_settings *)settings;
-	data->dev = dev;
 	data->irq = lsm9ds0->irq;
 	data->regmap = regmap;
 	data->vdd = lsm9ds0->vdd;
diff --git a/drivers/iio/magnetometer/st_magn_core.c b/drivers/iio/magnetometer/st_magn_core.c
index 1458906a3765..0806a1e65ce4 100644
--- a/drivers/iio/magnetometer/st_magn_core.c
+++ b/drivers/iio/magnetometer/st_magn_core.c
@@ -611,8 +611,8 @@  EXPORT_SYMBOL(st_magn_get_settings);
 int st_magn_common_probe(struct iio_dev *indio_dev)
 {
 	struct st_sensor_data *mdata = iio_priv(indio_dev);
-	struct st_sensors_platform_data *pdata = dev_get_platdata(mdata->dev);
 	struct device *parent = indio_dev->dev.parent;
+	struct st_sensors_platform_data *pdata = dev_get_platdata(parent);
 	int err;
 
 	indio_dev->modes = INDIO_DIRECT_MODE;
@@ -626,7 +626,7 @@  int st_magn_common_probe(struct iio_dev *indio_dev)
 	indio_dev->channels = mdata->sensor_settings->ch;
 	indio_dev->num_channels = ST_SENSORS_NUMBER_ALL_CHANNELS;
 
-	err = iio_read_mount_matrix(mdata->dev, &mdata->mount_matrix);
+	err = iio_read_mount_matrix(parent, &mdata->mount_matrix);
 	if (err)
 		return err;
 
diff --git a/drivers/iio/pressure/st_pressure_core.c b/drivers/iio/pressure/st_pressure_core.c
index cebcc1d93d0b..26a1ee43d56e 100644
--- a/drivers/iio/pressure/st_pressure_core.c
+++ b/drivers/iio/pressure/st_pressure_core.c
@@ -677,8 +677,8 @@  EXPORT_SYMBOL(st_press_get_settings);
 int st_press_common_probe(struct iio_dev *indio_dev)
 {
 	struct st_sensor_data *press_data = iio_priv(indio_dev);
-	struct st_sensors_platform_data *pdata = dev_get_platdata(press_data->dev);
 	struct device *parent = indio_dev->dev.parent;
+	struct st_sensors_platform_data *pdata = dev_get_platdata(parent);
 	int err;
 
 	indio_dev->modes = INDIO_DIRECT_MODE;
diff --git a/include/linux/iio/common/st_sensors.h b/include/linux/iio/common/st_sensors.h
index d17ae1e5ca19..22f67845cdd3 100644
--- a/include/linux/iio/common/st_sensors.h
+++ b/include/linux/iio/common/st_sensors.h
@@ -220,7 +220,6 @@  struct st_sensor_settings {
 
 /**
  * struct st_sensor_data - ST sensor device status
- * @dev: Pointer to instance of struct device (I2C or SPI).
  * @trig: The trigger in use by the core driver.
  * @mount_matrix: The mounting matrix of the sensor.
  * @sensor_settings: Pointer to the specific sensor settings in use.
@@ -240,7 +239,6 @@  struct st_sensor_settings {
  * @buffer_data: Data used by buffer part.
  */
 struct st_sensor_data {
-	struct device *dev;
 	struct iio_trigger *trig;
 	struct iio_mount_matrix mount_matrix;
 	struct st_sensor_settings *sensor_settings;