| Message ID | 20210825152518.379386-20-miquel.raynal@bootlin.com (mailing list archive) |
|---|---|
| State | Changes Requested |
| Headers | show |
| Series | TI AM437X ADC1 | expand |
On Wed, 25 Aug 2021 17:24:57 +0200 Miquel Raynal <miquel.raynal@bootlin.com> wrote: > The idle register is valid no matter if the touchscreen is used or not, > let's always configure it. Probably want a statement in here about the reordering that occurred in resume. J > > Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> > --- > drivers/mfd/ti_am335x_tscadc.c | 6 +++--- > 1 file changed, 3 insertions(+), 3 deletions(-) > > diff --git a/drivers/mfd/ti_am335x_tscadc.c b/drivers/mfd/ti_am335x_tscadc.c > index 258199be4c6a..7071344ad18e 100644 > --- a/drivers/mfd/ti_am335x_tscadc.c > +++ b/drivers/mfd/ti_am335x_tscadc.c > @@ -218,16 +218,16 @@ static int ti_tscadc_probe(struct platform_device *pdev) > ctrl = CNTRLREG_STEPCONFIGWRT | CNTRLREG_STEPID; > regmap_write(tscadc->regmap, REG_CTRL, ctrl); > > - /* Set register bits for Idle Config Mode */ > if (tsc_wires > 0) { > tscadc->tsc_wires = tsc_wires; > if (tsc_wires == 5) > ctrl |= CNTRLREG_5WIRE | CNTRLREG_TSCENB; > else > ctrl |= CNTRLREG_4WIRE | CNTRLREG_TSCENB; > - tscadc_idle_config(tscadc); > } > > + tscadc_idle_config(tscadc); > + > /* Enable the TSC module enable bit */ > ctrl |= CNTRLREG_TSCSSENB; > regmap_write(tscadc->regmap, REG_CTRL, ctrl); > @@ -318,12 +318,12 @@ static int __maybe_unused tscadc_resume(struct device *dev) > ctrl |= CNTRLREG_5WIRE | CNTRLREG_TSCENB; > else > ctrl |= CNTRLREG_4WIRE | CNTRLREG_TSCENB; > - tscadc_idle_config(tscadc); > } > ctrl |= CNTRLREG_TSCSSENB; > regmap_write(tscadc->regmap, REG_CTRL, ctrl); > > regmap_write(tscadc->regmap, REG_CLKDIV, tscadc->clk_div); > + tscadc_idle_config(tscadc); > > return 0; > }
diff --git a/drivers/mfd/ti_am335x_tscadc.c b/drivers/mfd/ti_am335x_tscadc.c index 258199be4c6a..7071344ad18e 100644 --- a/drivers/mfd/ti_am335x_tscadc.c +++ b/drivers/mfd/ti_am335x_tscadc.c @@ -218,16 +218,16 @@ static int ti_tscadc_probe(struct platform_device *pdev) ctrl = CNTRLREG_STEPCONFIGWRT | CNTRLREG_STEPID; regmap_write(tscadc->regmap, REG_CTRL, ctrl); - /* Set register bits for Idle Config Mode */ if (tsc_wires > 0) { tscadc->tsc_wires = tsc_wires; if (tsc_wires == 5) ctrl |= CNTRLREG_5WIRE | CNTRLREG_TSCENB; else ctrl |= CNTRLREG_4WIRE | CNTRLREG_TSCENB; - tscadc_idle_config(tscadc); } + tscadc_idle_config(tscadc); + /* Enable the TSC module enable bit */ ctrl |= CNTRLREG_TSCSSENB; regmap_write(tscadc->regmap, REG_CTRL, ctrl); @@ -318,12 +318,12 @@ static int __maybe_unused tscadc_resume(struct device *dev) ctrl |= CNTRLREG_5WIRE | CNTRLREG_TSCENB; else ctrl |= CNTRLREG_4WIRE | CNTRLREG_TSCENB; - tscadc_idle_config(tscadc); } ctrl |= CNTRLREG_TSCSSENB; regmap_write(tscadc->regmap, REG_CTRL, ctrl); regmap_write(tscadc->regmap, REG_CLKDIV, tscadc->clk_div); + tscadc_idle_config(tscadc); return 0; }
The idle register is valid no matter if the touchscreen is used or not, let's always configure it. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> --- drivers/mfd/ti_am335x_tscadc.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)