diff mbox series

[v5,12/15] iio: adc: aspeed: Add func to set sampling rate.

Message ID 20210831071458.2334-13-billy_tsai@aspeedtech.com (mailing list archive)
State Changes Requested
Headers show
Series Add support for ast2600 ADC | expand

Commit Message

Billy Tsai Aug. 31, 2021, 7:14 a.m. UTC
Add the function to set the sampling rate and keep the sampling period
for a driver used to wait the fresh value.
In addition, since the ADC clock is required when initializing the ADC
device, move clk_prepare_enable ahead of the initialization phase.

Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>
---
 drivers/iio/adc/aspeed_adc.c | 59 ++++++++++++++++++++++++------------
 1 file changed, 40 insertions(+), 19 deletions(-)
diff mbox series

Patch

diff --git a/drivers/iio/adc/aspeed_adc.c b/drivers/iio/adc/aspeed_adc.c
index 349377b9fac0..1333d7a88427 100644
--- a/drivers/iio/adc/aspeed_adc.c
+++ b/drivers/iio/adc/aspeed_adc.c
@@ -73,6 +73,12 @@ 
 
 #define ASPEED_ADC_INIT_POLLING_TIME	500
 #define ASPEED_ADC_INIT_TIMEOUT		500000
+/*
+ * When the sampling rate is too high, the ADC may not have enough charging
+ * time, resulting in a low voltage value. Thus, the default uses a slow
+ * sampling rate for most use cases.
+ */
+#define ASPEED_ADC_DEF_SAMPLING_RATE	65000
 
 struct aspeed_adc_model_data {
 	const char *model_name;
@@ -96,6 +102,7 @@  struct aspeed_adc_data {
 	struct clk_hw		*clk_scaler;
 	struct reset_control	*rst;
 	int			vref_mv;
+	u32			sample_period_ns;
 };
 
 #define ASPEED_CHAN(_idx, _data_reg_addr) {			\
@@ -127,6 +134,24 @@  static const struct iio_chan_spec aspeed_adc_iio_channels[] = {
 	ASPEED_CHAN(15, 0x2E),
 };
 
+static int aspeed_adc_set_sampling_rate(struct iio_dev *indio_dev, u32 rate)
+{
+	struct aspeed_adc_data *data = iio_priv(indio_dev);
+
+	if (rate < data->model_data->min_sampling_rate ||
+	    rate > data->model_data->max_sampling_rate)
+		return -EINVAL;
+	/* Each sampling needs 12 clocks to convert.*/
+	clk_set_rate(data->clk_scaler->clk, rate * ASPEED_CLOCKS_PER_SAMPLE);
+	rate = clk_get_rate(data->clk_scaler->clk);
+	data->sample_period_ns = DIV_ROUND_UP_ULL(
+		(u64)NSEC_PER_SEC * ASPEED_CLOCKS_PER_SAMPLE, rate);
+	dev_dbg(data->dev, "Adc clock = %d sample period = %d ns", rate,
+		data->sample_period_ns);
+
+	return 0;
+}
+
 static int aspeed_adc_read_raw(struct iio_dev *indio_dev,
 			       struct iio_chan_spec const *chan,
 			       int *val, int *val2, long mask)
@@ -157,17 +182,9 @@  static int aspeed_adc_write_raw(struct iio_dev *indio_dev,
 				struct iio_chan_spec const *chan,
 				int val, int val2, long mask)
 {
-	struct aspeed_adc_data *data = iio_priv(indio_dev);
-
 	switch (mask) {
 	case IIO_CHAN_INFO_SAMP_FREQ:
-		if (val < data->model_data->min_sampling_rate ||
-			val > data->model_data->max_sampling_rate)
-			return -EINVAL;
-
-		clk_set_rate(data->clk_scaler->clk,
-				val * ASPEED_CLOCKS_PER_SAMPLE);
-		return 0;
+		return aspeed_adc_set_sampling_rate(indio_dev, val);
 
 	case IIO_CHAN_INFO_SCALE:
 	case IIO_CHAN_INFO_RAW:
@@ -409,6 +426,20 @@  static int aspeed_adc_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
+	ret = clk_prepare_enable(data->clk_scaler->clk);
+	if (ret)
+		return ret;
+
+	ret = devm_add_action_or_reset(data->dev,
+				       aspeed_adc_clk_disable_unprepare,
+				       data->clk_scaler->clk);
+	if (ret)
+		return ret;
+
+	ret = aspeed_adc_set_sampling_rate(indio_dev, ASPEED_ADC_DEF_SAMPLING_RATE);
+	if (ret)
+		return ret;
+
 	if (data->model_data->wait_init_sequence) {
 		adc_engine_control_reg_val =
 			readl(data->base + ASPEED_REG_ENGINE_CONTROL);
@@ -436,16 +467,6 @@  static int aspeed_adc_probe(struct platform_device *pdev)
 	}
 
 	/* Start all channels in normal mode. */
-	ret = clk_prepare_enable(data->clk_scaler->clk);
-	if (ret)
-		return ret;
-
-	ret = devm_add_action_or_reset(data->dev,
-				       aspeed_adc_clk_disable_unprepare,
-				       data->clk_scaler->clk);
-	if (ret)
-		return ret;
-
 	adc_engine_control_reg_val =
 		readl(data->base + ASPEED_REG_ENGINE_CONTROL);
 	adc_engine_control_reg_val |=