From patchwork Tue Sep 28 13:30:58 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Miquel Raynal X-Patchwork-Id: 12522627 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id A0CE6C43219 for ; Tue, 28 Sep 2021 13:32:00 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 8ECDE60FF2 for ; Tue, 28 Sep 2021 13:32:00 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S241042AbhI1Ndh (ORCPT ); Tue, 28 Sep 2021 09:33:37 -0400 Received: from relay3-d.mail.gandi.net ([217.70.183.195]:38377 "EHLO relay3-d.mail.gandi.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S240988AbhI1Ndg (ORCPT ); Tue, 28 Sep 2021 09:33:36 -0400 Received: (Authenticated sender: miquel.raynal@bootlin.com) by relay3-d.mail.gandi.net (Postfix) with ESMTPSA id 70A006001F; Tue, 28 Sep 2021 13:31:53 +0000 (UTC) From: Miquel Raynal To: Jonathan Cameron , Lars-Peter Clausen , Lee Jones Cc: Peter Meerwald-Stadler , Rob Herring , Dmitry Torokhov , bcousson@baylibre.com, Tony Lindgren , linux-iio@vger.kernel.org, devicetree@vger.kernel.org, linux-omap@vger.kernel.org, Thomas Petazzoni , Vignesh Raghavendra , Lokesh Vutla , Tero Kristo , Ryan Barnett , Grygorii Strashko , Jason Reeder , , Miquel Raynal , Rob Herring , Jonathan Cameron Subject: [PATCH v4 03/48] dt-bindings: touchscreen: ti,am3359-tsc: New yaml description Date: Tue, 28 Sep 2021 15:30:58 +0200 Message-Id: <20210928133143.157329-4-miquel.raynal@bootlin.com> X-Mailer: git-send-email 2.27.0 In-Reply-To: <20210928133143.157329-1-miquel.raynal@bootlin.com> References: <20210928133143.157329-1-miquel.raynal@bootlin.com> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-iio@vger.kernel.org This touchscreen controller is already described in a text file: Documentation/devicetree/bindings/input/touchscreen/ti-tsc-adc.txt After introducing a proper description of the MFD, this is the second step. The file cannot be removed yet as it also contains an ADC description. Signed-off-by: Miquel Raynal Reviewed-by: Rob Herring Reviewed-by: Jonathan Cameron Acked-by: Dmitry Torokhov --- .../input/touchscreen/ti,am3359-tsc.yaml | 76 +++++++++++++++++++ 1 file changed, 76 insertions(+) create mode 100644 Documentation/devicetree/bindings/input/touchscreen/ti,am3359-tsc.yaml diff --git a/Documentation/devicetree/bindings/input/touchscreen/ti,am3359-tsc.yaml b/Documentation/devicetree/bindings/input/touchscreen/ti,am3359-tsc.yaml new file mode 100644 index 000000000000..e44cc65abc8c --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/ti,am3359-tsc.yaml @@ -0,0 +1,76 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/touchscreen/ti,am3359-tsc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI AM3359 Touchscreen controller + +maintainers: + - Miquel Raynal + +properties: + compatible: + const: ti,am3359-tsc + + ti,wires: + description: Wires refer to application modes i.e. 4/5/8 wire touchscreen + support on the platform. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [4, 5, 8] + + ti,x-plate-resistance: + description: X plate resistance + $ref: /schemas/types.yaml#/definitions/uint32 + + ti,coordinate-readouts: + description: The sequencer supports a total of 16 programmable steps. Each + step is used to read a single coordinate. A single readout is enough but + multiple reads can increase the quality. A value of 5 means, 5 reads for + X, 5 for Y and 2 for Z (always). This utilises 12 of the 16 software steps + available. The remaining 4 can be used by the ADC. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 6 + + ti,wire-config: + description: Different boards could have a different order for connecting + wires on touchscreen. We need to provide an 8-bit number where the + first four bits represent the analog lines and the next 4 bits represent + positive/negative terminal on that input line. Notations to represent the + input lines and terminals respectively are as follows, AIN0 = 0, AIN1 = 1 + and so on until AIN7 = 7. XP = 0, XN = 1, YP = 2, YN = 3. + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 4 + maxItems: 8 + + ti,charge-delay: + description: Length of touch screen charge delay step in terms of ADC clock + cycles. Charge delay value should be large in order to avoid false pen-up + events. This value effects the overall sampling speed, hence need to be + kept as low as possible, while avoiding false pen-up event. Start from a + lower value, say 0x400, and increase value until false pen-up events are + avoided. The pen-up detection happens immediately after the charge step, + so this does in fact function as a hardware knob for adjusting the amount + of "settling time". + $ref: /schemas/types.yaml#/definitions/uint32 + +required: + - compatible + - ti,wires + - ti,x-plate-resistance + - ti,coordinate-readouts + - ti,wire-config + +additionalProperties: false + +examples: + - | + tsc { + compatible = "ti,am3359-tsc"; + ti,wires = <4>; + ti,x-plate-resistance = <200>; + ti,coordinate-readouts = <5>; + ti,wire-config = <0x00 0x11 0x22 0x33>; + ti,charge-delay = <0x400>; + };