| Message ID | 20211221153333.0bfe8257@jic23-huawei (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers | show |
| Series | [PULL] 1st set of new device support, features and cleanup for IIO in the 5.17 cycle. | expand |
On Tue, Dec 21, 2021 at 03:33:33PM +0000, Jonathan Cameron wrote: > The following changes since commit fa55b7dcdc43c1aa1ba12bca9d2dd4318c2a0dbf: > > Linux 5.16-rc1 (2021-11-14 13:56:52 -0800) > > are available in the Git repository at: > > https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-for-5.17a Pulled and pushed out, thanks. greg k-h
The following changes since commit fa55b7dcdc43c1aa1ba12bca9d2dd4318c2a0dbf: Linux 5.16-rc1 (2021-11-14 13:56:52 -0800) are available in the Git repository at: https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-for-5.17a for you to fetch changes up to c9791a94384af07592d29504004d2255dbaf8663: iio: adc: ti-adc081c: Partial revert of removal of ACPI IDs (2021-12-21 15:13:29 +0000) ---------------------------------------------------------------- 1st set of IIO new device support, features and cleanup for 5.17 Includes some fixes that were either late breaking, low priority or complex enough to not be good to rush in late in the cycle. Tree rebased today to fix up some trivial issues + pull in a fix that was previously on the fixes-togreg branch. Vast majority have been in linux-next for some time now. New device support * adi,ad7293 - New driver and bindings for this Power Amplifier drain current controller. A complex device with various related monitoring functions. * adi,ad75513R - New driver and bindings for this combined ADC and DAC device. - A few follow up fixes. * adi,admv8818 - New driver (and type) for this 2-18GHz filter device. Includes bindings and ABI documentation to allow clk_notifier based auto adjustment of the filters in appropriate applications. * liteon,ltr501 - Support for the ltr303. ID and chip specific info table. * xilinx,ams - New generic firmware function fwnode_iomap() as used in this driver. - New driver and bindings for this ADC and on-chip sensors as found in various Xilinx devices. Core * Introduced IIO_VAL_INT_64 which uses val and val2 in IIO callbacks to form a 64 bit integer when higher precision needed. * Allow IIO_ENUM_AVAILABLE to be used with different shared values. * Fix a long term issue with scheduling whilst atomic when iio_trig_poll() is called but no trigger consumers are actually enabled and hence the trigger may be reenabled from the interrupt handler. Seen in the wild on the tsc2046. * Mark iio_device_type const. * buffer: Use a separate index variable to simplify code. * buffer-dma: Clear out unused struct iio_buffer_block * buffer-dmaengine: Switch to cheaper round_down() as power of 2 values. Tests/tools * format_value - Check against NULL returns from allocations in tests. - Add IIO_VAL_INT_64 test case. * event_monitor - Flush the output after event to given more consistent latency when tool output piped to other programs. Driver Features * axp20x - Add support for NTC thermistor channel and document TS pin binding. * arm,scmi - Add reading of raw channel values (using IIO_VAL_INT_64) * liteon,ltr501 - Add proximity-near-level support and dt-binding. Tree wide cleanup * Remove no-op trigger ops from multiple drivers. * Stop using dev_get_drvdata() on the iio_dev->dev in various drivers and then stop assigning it to allow this to be used for other purposes. We can always get to the indio_dev using dev_to_iio_dev() which is a container_of() based approach. Also cleanup up some related unnecessary convoluted cases. - atmel,at91-sam5d2 - nxp,imx7d - meas,ms5611 - st,st_sensors * Where available (or easy to introduce) use the scan_type.* values in place of a second copy for read_raw and similar paths. - adi,ad7266 - bosch,bma220 - fsl,mac3110 - fsl,mma7455 - fsl,mpl3115 - kionix,kcjk-1013 - sensortek,stk8ba50 - sensortek,stk8312 - ti,adc12138 - ti,ads1015 - vti,sca3000 - xilinx,xadc-core * Switch drives over to generic firmware properties including appropriate header changes to avoid including of.h - Various DACs had false CONFIG_OF dependencies. - dpot-dac - envelope-detector - adi,ad5755 - adi,ad5758 - capella,cm3605 - maxim,max9611 - microchip,mcp41010 - microchip,mcp3911 - ti,adc12138 * Trivial clang warning fixes for W=1 warnings. Driver specific cleanup and minor fixes * adi,ad7606 - Comment fixes. * ams,ad3935 - Drop pointless cast to the same type. * atmel,at91-sama5d2 - Fix wrong cast of iio_dev->dev to platform_device that happened to be harmless. * fsl,mma7660 - Stop i2c remove() function returning an error code. Part of a rework to eventually stop returning anything from these. * fsl,mma8452 - Use correct type for local irqreturn_t. * nxp,imx8mq - Maintainer email address update. * nxp,lpc18xx_adc - Ensure clk_prepare_enable() called before clk_get_rate(). - Switch of.h for mod_devicetable.h to reflect no of specific functions, just the id table. * renesas,rzg2l - Drop a dev_err() that just duplicates error printed in platform_get_irq() * sgx,vz89x - Drop pointless cast. * st,lsm6dsx - Make it possible to disable the sensorhub from DT to avoid a corner case where the address of a slave device many be accidentally modified. * st,stm32-adc - Stop leaking an of_node in an error path. * st,stmp2 - Avoid wrong sized type for bit field which could result in over-reading (harmless). Precursor to enabling -Warray-bounds. * ti,adc081c - Put back some ACPI support for non standards compliant ADC081C ID because it is known to be in the wild on some Aaeon boards. * ti,ads8688 - Cleanup redundant local ret variable assignment. * ti,ina2xx-adc - Use helper macro kthread_run() to replace some boilerplate. - Avoid double reference counting. - Drop pointless cast. * xilinx,xadc - Make the IRQ optional as not always wired to the host system. ---------------------------------------------------------------- Anand Ashok Dumbre (4): device property: Add fwnode_iomap() iio: adc: Add Xilinx AMS driver dt-bindings: iio: adc: Add Xilinx AMS binding documentation MAINTAINERS: Add maintainer for xilinx-ams Andriy Tryshnivskyy (4): iio: core: Introduce IIO_VAL_INT_64. iio/scmi: Add reading "raw" attribute. iio: test: Add check against NULL for buffer in tests. iio: test: Add test for IIO_VAL_INT_64. André Gustavo Nakagomi Lopez (1): iio: adc: lpc18xx_adc: Reorder clk_get_rate() function call Andy Shevchenko (1): iio: buffer: Use dedicated variable in iio_buffers_alloc_sysfs_and_mask() Antoniu Miclaus (7): iio: expose shared parameter in IIO_ENUM_AVAILABLE iio:dac:ad7293: add support for AD7293 dt-bindings:iio:dac: add ad7293 doc iio: add filter subfolder iio:filter:admv8818: add support for ADMV8818 dt-bindings:iio:filter: add admv8818 doc iio:filter:admv8818: Add sysfs ABI documentation Cai Huoqing (3): iio: adc: ina2xx: Make use of the helper macro kthread_run() iio: adc: ina2xx: Avoid double reference counting from get_task_struct/put_task_struct() MAINTAINERS: Update i.MX 8QXP ADC info Cosmin Tanislav (3): iio: add addac subdirectory dt-bindings: iio: add AD74413R iio: addac: add AD74413R driver Dan Carpenter (1): iio: addac: ad74413r: fix off by one in ad74413r_parse_channel_config() Evgeny Boger (2): iio:adc:axp20x: add support for NTC thermistor dt-bindings: iio: adc: document TS voltage in AXP PMICs Gwendal Grignou (12): iio: bma220: Use scan_type when processing raw data iio: kxcjk-1013: Use scan_type when processing raw data iio: mma7455: Use scan_type when processing raw data iio: sca3000: Use scan_type when processing raw data iio: stk8312: Use scan_type when processing raw data iio: stk8ba50: Use scan_type when processing raw data iio: ad7266: Use scan_type when processing raw data iio: ti-adc12138: Use scan_type when processing raw data iio: mag3110: Use scan_type when processing raw data iio: ti-ads1015: Remove shift variable ads1015_read_raw iio: xilinx-xadc-core: Use local variable in xadc_read_raw iio: mpl3115: Use scan_type.shift and realbit in mpl3115_read_raw Jonathan Cameron (28): iio: trigger: Fix a scheduling whilst atomic issue seen on tsc2046 iio:dac:ad5755: Switch to generic firmware properties and drop pdata iio:dac:ad5758: Drop unused of specific headers. iio:dac:dpot-dac: Swap of.h for mod_devicetable.h iio:dac:lpc18xx_dac: Swap from of* to mod_devicetable.h iio:pot:mcp41010: Switch to generic firmware properties. iio:light:cm3605: Switch to generic firmware properties. iio:adc:max9611: Switch to generic firmware properties. iio:adc:mcp3911: Switch to generic firmware properties. iio:adc:ti-adc12138: Switch to generic firmware properties and drop of_match_ptr iio:adc:envelope-detector: Switch from of headers to mod_devicetable.h iio:adc:ti-ads124s08: Drop dependency on OF. iio:adc/dac:Kconfig: Update to drop OF dependencies. dt-bindings: iio: dac: adi,ad5755: drop unrelated included. iio:accel:bma180: Suppress clang W=1 warning about pointer to enum conversion. iio:adc:ina2xx-adc: Suppress clang W=1 warning about pointer to enum conversion. iio:adc:rcar: Suppress clang W=1 warning about pointer to enum conversion. iio:adc:ti-ads1015: Suppress clang W=1 warning about pointer to enum conversion. iio:amplifiers:hmc425a: Suppress clang W=1 warning about pointer to enum conversion. iio:dac:mcp4725: Suppress clang W=1 warning about pointer to enum conversion. iio:imu:inv_icm42600: Suppress clang W=1 warning about pointer to enum conversion. iio:imu:inv_mpu6050: Suppress clang W=1 warning about pointer to enum conversion. iio:magn:ak8975: Suppress clang W=1 warning about pointer to enum conversion. iio:dummy: Drop set but unused variable len. iio:accel:bmc150: Mark structure __maybe_unused as only needed with for pm ops. iio:accel:kxcjk-1013: Mark struct __maybe_unused to avoid warning. iio:addac:ad74413r: Fix uninitialized ret in a path that won't be hit. iio: adc: ti-adc081c: Partial revert of removal of ACPI IDs Kees Cook (1): iio: stmpe-adc: Use correctly sized arguments for bit field Lars-Peter Clausen (21): iio: xilinx-xadc: Make IRQ optional iio: st-sensors: Use dev_to_iio_dev() in sysfs callbacks iio: imx7d_adc: Don't pass IIO device to imx7d_adc_{enable,disable}() iio: ms5611: Simplify IO callback parameters iio: Mark iio_device_type as const iio: interrupt-trigger: Remove no-op trigger ops iio: sysfs-trigger: Remove no-op trigger ops iio: ad_sigma_delta: Remove no-op trigger ops iio: afe4403: Remove no-op trigger ops iio: afe4404: Remove no-op trigger ops iio: as3935: Remove no-op trigger ops iio: atlas-sensor: Remove no-op trigger ops iio: gp2ap020a00f: Remove no-op trigger ops iio: lmp91000: Remove no-op trigger ops iio: mma8452: Use correct type for return variable in IRQ handler iio: at91-sama5d2: Fix incorrect cast to platform_device iio: at91-sama5d2: Use dev_to_iio_dev() in sysfs callbacks iio: iio_device_alloc(): Remove unnecessary self drvdata iio: as3935: Remove unnecessary cast iio: in2xx-adc: Remove unnecessary cast iio: vz89x: Remove unnecessary cast Lorenzo Bianconi (2): iio: imu: st_lsm6dsx: add dts property to disable sensor-hub Documentation: dt: iio: st_lsm6dsx: add disable-sensor-hub property Maslov Dmitry (1): iio: light: ltr501: Added ltr303 driver support Mihail Chindris (2): dt-bindings: iio: dac: Add adi,ad3552r.yaml drivers:iio:dac: Add AD3552R driver support Minghao Chi (1): iio:adc:ti-ads8688:: remove redundant ret variable Nikita Travkin (2): dt-bindings: iio: light: ltr501: Add proximity-near-level iio: ltr501: Export near level property for proximity sensor Paul Cercueil (2): iio: buffer-dma: Remove unused iio_buffer_block struct iio: buffer-dma: Use round_down() instead of rounddown() Uwe Kleine-König (1): iio: accel: mma7660: Warn about failure to put device in stand-by in .remove() Wan Jiabing (1): iio: adc: stm32-adc: Fix of_node_put() issue in stm32-adc Xiang wangx (1): iio: adc: ad7606: Fix syntax errors in comments Xu Wang (1): iio: adc: rzg2l_adc: Remove unnecessary print function dev_err() Zach DeCook (1): iio: event_monitor: Flush output on event .../ABI/testing/sysfs-bus-iio-filter-admv8818 | 16 + .../bindings/iio/adc/x-powers,axp209-adc.yaml | 3 + .../bindings/iio/adc/xlnx,zynqmp-ams.yaml | 227 +++ .../bindings/iio/addac/adi,ad74413r.yaml | 158 +++ .../devicetree/bindings/iio/dac/adi,ad3552r.yaml | 217 +++ .../devicetree/bindings/iio/dac/adi,ad5755.yaml | 1 - .../devicetree/bindings/iio/dac/adi,ad7293.yaml | 61 + .../bindings/iio/filter/adi,admv8818.yaml | 66 + .../devicetree/bindings/iio/imu/st,lsm6dsx.yaml | 7 + .../bindings/iio/light/liteon,ltr501.yaml | 7 + MAINTAINERS | 20 +- drivers/base/property.c | 16 + drivers/iio/Kconfig | 2 + drivers/iio/Makefile | 2 + drivers/iio/accel/bma180.c | 4 +- drivers/iio/accel/bma220_spi.c | 6 +- drivers/iio/accel/bmc150-accel-core.c | 2 +- drivers/iio/accel/kxcjk-1013.c | 5 +- drivers/iio/accel/mma7455_core.c | 3 +- drivers/iio/accel/mma7660.c | 8 +- drivers/iio/accel/mma8452.c | 2 +- drivers/iio/accel/mma9553.c | 2 +- drivers/iio/accel/sca3000.c | 17 +- drivers/iio/accel/stk8312.c | 2 +- drivers/iio/accel/stk8ba50.c | 3 +- drivers/iio/adc/Kconfig | 21 +- drivers/iio/adc/Makefile | 1 + drivers/iio/adc/ad7192.c | 3 +- drivers/iio/adc/ad7266.c | 3 +- drivers/iio/adc/ad7606.h | 2 +- drivers/iio/adc/ad_sigma_delta.c | 4 - drivers/iio/adc/at91-sama5d2_adc.c | 38 +- drivers/iio/adc/axp20x_adc.c | 45 +- drivers/iio/adc/envelope-detector.c | 3 +- drivers/iio/adc/hi8435.c | 2 +- drivers/iio/adc/imx7d_adc.c | 5 +- drivers/iio/adc/ina2xx-adc.c | 15 +- drivers/iio/adc/lpc18xx_adc.c | 6 +- drivers/iio/adc/max9611.c | 20 +- drivers/iio/adc/mcp3911.c | 9 +- drivers/iio/adc/rcar-gyroadc.c | 3 +- drivers/iio/adc/rzg2l_adc.c | 4 +- drivers/iio/adc/stm32-adc.c | 3 +- drivers/iio/adc/stmpe-adc.c | 5 +- drivers/iio/adc/ti-adc081c.c | 22 +- drivers/iio/adc/ti-adc12138.c | 14 +- drivers/iio/adc/ti-ads1015.c | 10 +- drivers/iio/adc/ti-ads124s08.c | 3 +- drivers/iio/adc/ti-ads8688.c | 4 +- drivers/iio/adc/xilinx-ams.c | 1451 +++++++++++++++++++ drivers/iio/adc/xilinx-xadc-core.c | 64 +- drivers/iio/addac/Kconfig | 20 + drivers/iio/addac/Makefile | 7 + drivers/iio/addac/ad74413r.c | 1475 ++++++++++++++++++++ drivers/iio/amplifiers/hmc425a.c | 2 +- drivers/iio/buffer/industrialio-buffer-dmaengine.c | 2 +- drivers/iio/chemical/atlas-sensor.c | 4 - drivers/iio/chemical/vz89x.c | 2 +- drivers/iio/common/scmi_sensors/scmi_iio.c | 57 +- drivers/iio/common/st_sensors/st_sensors_core.c | 4 +- drivers/iio/dac/Kconfig | 22 +- drivers/iio/dac/Makefile | 2 + drivers/iio/dac/ad3552r.c | 1138 +++++++++++++++ drivers/iio/dac/ad5064.c | 4 +- drivers/iio/dac/ad5380.c | 2 +- drivers/iio/dac/ad5446.c | 2 +- drivers/iio/dac/ad5504.c | 2 +- drivers/iio/dac/ad5624r_spi.c | 2 +- drivers/iio/dac/ad5686.c | 2 +- drivers/iio/dac/ad5755.c | 152 +- drivers/iio/dac/ad5758.c | 3 +- drivers/iio/dac/ad5766.c | 13 +- drivers/iio/dac/ad5791.c | 2 +- drivers/iio/dac/ad7293.c | 934 +++++++++++++ drivers/iio/dac/dpot-dac.c | 2 +- drivers/iio/dac/lpc18xx_dac.c | 3 +- drivers/iio/dac/max5821.c | 2 +- drivers/iio/dac/mcp4725.c | 10 +- drivers/iio/dac/stm32-dac.c | 2 +- drivers/iio/dac/ti-dac082s085.c | 2 +- drivers/iio/dac/ti-dac5571.c | 2 +- drivers/iio/dac/ti-dac7311.c | 2 +- drivers/iio/dummy/iio_simple_dummy_buffer.c | 2 - drivers/iio/filter/Kconfig | 18 + drivers/iio/filter/Makefile | 7 + drivers/iio/filter/admv8818.c | 665 +++++++++ drivers/iio/health/afe4403.c | 5 - drivers/iio/health/afe4404.c | 5 - drivers/iio/iio_core.h | 2 +- drivers/iio/imu/inv_icm42600/inv_icm42600_i2c.c | 2 +- drivers/iio/imu/inv_icm42600/inv_icm42600_spi.c | 2 +- drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c | 2 +- drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c | 2 +- drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 4 +- drivers/iio/industrialio-buffer.c | 20 +- drivers/iio/industrialio-core.c | 6 +- drivers/iio/industrialio-trigger.c | 36 +- drivers/iio/light/cm3605.c | 6 +- drivers/iio/light/gp2ap020a00f.c | 5 - drivers/iio/light/ltr501.c | 42 +- drivers/iio/magnetometer/ak8975.c | 2 +- drivers/iio/magnetometer/hmc5843_core.c | 4 +- drivers/iio/magnetometer/mag3110.c | 6 +- drivers/iio/potentiometer/mcp41010.c | 6 +- drivers/iio/potentiostat/lmp91000.c | 4 - drivers/iio/pressure/mpl3115.c | 16 +- drivers/iio/pressure/ms5611.h | 6 +- drivers/iio/pressure/ms5611_core.c | 7 +- drivers/iio/pressure/ms5611_i2c.c | 11 +- drivers/iio/pressure/ms5611_spi.c | 17 +- drivers/iio/proximity/as3935.c | 6 +- drivers/iio/test/iio-test-format.c | 123 +- drivers/iio/trigger/iio-trig-interrupt.c | 4 - drivers/iio/trigger/iio-trig-sysfs.c | 4 - drivers/iio/trigger/stm32-timer-trigger.c | 4 +- include/dt-bindings/iio/addac/adi,ad74413r.h | 21 + include/linux/iio/buffer-dma.h | 5 - include/linux/iio/iio.h | 5 +- include/linux/iio/trigger.h | 2 + include/linux/iio/types.h | 1 + include/linux/platform_data/ad5755.h | 102 -- include/linux/property.h | 2 + tools/iio/iio_event_monitor.c | 1 + 123 files changed, 7226 insertions(+), 459 deletions(-) create mode 100644 Documentation/ABI/testing/sysfs-bus-iio-filter-admv8818 create mode 100644 Documentation/devicetree/bindings/iio/adc/xlnx,zynqmp-ams.yaml create mode 100644 Documentation/devicetree/bindings/iio/addac/adi,ad74413r.yaml create mode 100644 Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml create mode 100644 Documentation/devicetree/bindings/iio/dac/adi,ad7293.yaml create mode 100644 Documentation/devicetree/bindings/iio/filter/adi,admv8818.yaml create mode 100644 drivers/iio/adc/xilinx-ams.c create mode 100644 drivers/iio/addac/Kconfig create mode 100644 drivers/iio/addac/Makefile create mode 100644 drivers/iio/addac/ad74413r.c create mode 100644 drivers/iio/dac/ad3552r.c create mode 100644 drivers/iio/dac/ad7293.c create mode 100644 drivers/iio/filter/Kconfig create mode 100644 drivers/iio/filter/Makefile create mode 100644 drivers/iio/filter/admv8818.c create mode 100644 include/dt-bindings/iio/addac/adi,ad74413r.h delete mode 100644 include/linux/platform_data/ad5755.h