| Message ID | 20220104214214.198843-9-paul@crapouillou.net (mailing list archive) |
|---|---|
| State | Handled Elsewhere |
| Headers | show |
| Series | DEV_PM_OPS macros rework | expand |
On Tue, 4 Jan 2022 21:42:14 +0000 Paul Cercueil <paul@crapouillou.net> wrote: > Use the new EXPORT_RUNTIME_DEV_PM_OPS() macro. It allows the underlying > dev_pm_ops struct as well as the suspend/resume callbacks to be detected > as dead code in the case where CONFIG_PM is disabled, without having to > wrap everything inside #ifdef CONFIG_PM guards. > > Signed-off-by: Paul Cercueil <paul@crapouillou.net> Hohum - bad choice of example. These shouldn't be exported as only used within the same module ;) No one ever wrote the other bus interface (and the part is ancient so I can't see it happening now) hence whilst there are two files, they are built into a single module. There is a comment about this in the Makefile. Jonathan > --- > drivers/iio/gyro/mpu3050-core.c | 13 ++++--------- > drivers/iio/gyro/mpu3050-i2c.c | 2 +- > 2 files changed, 5 insertions(+), 10 deletions(-) > > diff --git a/drivers/iio/gyro/mpu3050-core.c b/drivers/iio/gyro/mpu3050-core.c > index ea387efab62d..7d6721e268fe 100644 > --- a/drivers/iio/gyro/mpu3050-core.c > +++ b/drivers/iio/gyro/mpu3050-core.c > @@ -1281,7 +1281,6 @@ int mpu3050_common_remove(struct device *dev) > } > EXPORT_SYMBOL(mpu3050_common_remove); > > -#ifdef CONFIG_PM > static int mpu3050_runtime_suspend(struct device *dev) > { > return mpu3050_power_down(iio_priv(dev_get_drvdata(dev))); > @@ -1291,15 +1290,11 @@ static int mpu3050_runtime_resume(struct device *dev) > { > return mpu3050_power_up(iio_priv(dev_get_drvdata(dev))); > } > -#endif /* CONFIG_PM */ > > -const struct dev_pm_ops mpu3050_dev_pm_ops = { > - SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, > - pm_runtime_force_resume) > - SET_RUNTIME_PM_OPS(mpu3050_runtime_suspend, > - mpu3050_runtime_resume, NULL) > -}; > -EXPORT_SYMBOL(mpu3050_dev_pm_ops); > +EXPORT_RUNTIME_DEV_PM_OPS(mpu3050_dev_pm_ops, > + mpu3050_runtime_suspend, > + mpu3050_runtime_resume, > + NULL); > > MODULE_AUTHOR("Linus Walleij"); > MODULE_DESCRIPTION("MPU3050 gyroscope driver"); > diff --git a/drivers/iio/gyro/mpu3050-i2c.c b/drivers/iio/gyro/mpu3050-i2c.c > index ef5bcbc4b45b..820133cad601 100644 > --- a/drivers/iio/gyro/mpu3050-i2c.c > +++ b/drivers/iio/gyro/mpu3050-i2c.c > @@ -114,7 +114,7 @@ static struct i2c_driver mpu3050_i2c_driver = { > .driver = { > .of_match_table = mpu3050_i2c_of_match, > .name = "mpu3050-i2c", > - .pm = &mpu3050_dev_pm_ops, > + .pm = pm_ptr(&mpu3050_dev_pm_ops), > }, > }; > module_i2c_driver(mpu3050_i2c_driver);
Le mer., janv. 5 2022 at 10:11:06 +0000, Jonathan Cameron <Jonathan.Cameron@Huawei.com> a écrit : > On Tue, 4 Jan 2022 21:42:14 +0000 > Paul Cercueil <paul@crapouillou.net> wrote: > >> Use the new EXPORT_RUNTIME_DEV_PM_OPS() macro. It allows the >> underlying >> dev_pm_ops struct as well as the suspend/resume callbacks to be >> detected >> as dead code in the case where CONFIG_PM is disabled, without >> having to >> wrap everything inside #ifdef CONFIG_PM guards. >> >> Signed-off-by: Paul Cercueil <paul@crapouillou.net> > > Hohum - bad choice of example. These shouldn't be exported as only > used within > the same module ;) No one ever wrote the other bus interface (and > the part is > ancient so I can't see it happening now) hence whilst there are two > files, they > are built into a single module. There is a comment about this in the > Makefile. Ok - then I'll drop this patch and try to find a better driver to showcase this. Cheers, -Paul >> --- >> drivers/iio/gyro/mpu3050-core.c | 13 ++++--------- >> drivers/iio/gyro/mpu3050-i2c.c | 2 +- >> 2 files changed, 5 insertions(+), 10 deletions(-) >> >> diff --git a/drivers/iio/gyro/mpu3050-core.c >> b/drivers/iio/gyro/mpu3050-core.c >> index ea387efab62d..7d6721e268fe 100644 >> --- a/drivers/iio/gyro/mpu3050-core.c >> +++ b/drivers/iio/gyro/mpu3050-core.c >> @@ -1281,7 +1281,6 @@ int mpu3050_common_remove(struct device *dev) >> } >> EXPORT_SYMBOL(mpu3050_common_remove); >> >> -#ifdef CONFIG_PM >> static int mpu3050_runtime_suspend(struct device *dev) >> { >> return mpu3050_power_down(iio_priv(dev_get_drvdata(dev))); >> @@ -1291,15 +1290,11 @@ static int mpu3050_runtime_resume(struct >> device *dev) >> { >> return mpu3050_power_up(iio_priv(dev_get_drvdata(dev))); >> } >> -#endif /* CONFIG_PM */ >> >> -const struct dev_pm_ops mpu3050_dev_pm_ops = { >> - SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, >> - pm_runtime_force_resume) >> - SET_RUNTIME_PM_OPS(mpu3050_runtime_suspend, >> - mpu3050_runtime_resume, NULL) >> -}; >> -EXPORT_SYMBOL(mpu3050_dev_pm_ops); >> +EXPORT_RUNTIME_DEV_PM_OPS(mpu3050_dev_pm_ops, >> + mpu3050_runtime_suspend, >> + mpu3050_runtime_resume, >> + NULL); >> >> MODULE_AUTHOR("Linus Walleij"); >> MODULE_DESCRIPTION("MPU3050 gyroscope driver"); >> diff --git a/drivers/iio/gyro/mpu3050-i2c.c >> b/drivers/iio/gyro/mpu3050-i2c.c >> index ef5bcbc4b45b..820133cad601 100644 >> --- a/drivers/iio/gyro/mpu3050-i2c.c >> +++ b/drivers/iio/gyro/mpu3050-i2c.c >> @@ -114,7 +114,7 @@ static struct i2c_driver mpu3050_i2c_driver = { >> .driver = { >> .of_match_table = mpu3050_i2c_of_match, >> .name = "mpu3050-i2c", >> - .pm = &mpu3050_dev_pm_ops, >> + .pm = pm_ptr(&mpu3050_dev_pm_ops), >> }, >> }; >> module_i2c_driver(mpu3050_i2c_driver); >
diff --git a/drivers/iio/gyro/mpu3050-core.c b/drivers/iio/gyro/mpu3050-core.c index ea387efab62d..7d6721e268fe 100644 --- a/drivers/iio/gyro/mpu3050-core.c +++ b/drivers/iio/gyro/mpu3050-core.c @@ -1281,7 +1281,6 @@ int mpu3050_common_remove(struct device *dev) } EXPORT_SYMBOL(mpu3050_common_remove); -#ifdef CONFIG_PM static int mpu3050_runtime_suspend(struct device *dev) { return mpu3050_power_down(iio_priv(dev_get_drvdata(dev))); @@ -1291,15 +1290,11 @@ static int mpu3050_runtime_resume(struct device *dev) { return mpu3050_power_up(iio_priv(dev_get_drvdata(dev))); } -#endif /* CONFIG_PM */ -const struct dev_pm_ops mpu3050_dev_pm_ops = { - SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, - pm_runtime_force_resume) - SET_RUNTIME_PM_OPS(mpu3050_runtime_suspend, - mpu3050_runtime_resume, NULL) -}; -EXPORT_SYMBOL(mpu3050_dev_pm_ops); +EXPORT_RUNTIME_DEV_PM_OPS(mpu3050_dev_pm_ops, + mpu3050_runtime_suspend, + mpu3050_runtime_resume, + NULL); MODULE_AUTHOR("Linus Walleij"); MODULE_DESCRIPTION("MPU3050 gyroscope driver"); diff --git a/drivers/iio/gyro/mpu3050-i2c.c b/drivers/iio/gyro/mpu3050-i2c.c index ef5bcbc4b45b..820133cad601 100644 --- a/drivers/iio/gyro/mpu3050-i2c.c +++ b/drivers/iio/gyro/mpu3050-i2c.c @@ -114,7 +114,7 @@ static struct i2c_driver mpu3050_i2c_driver = { .driver = { .of_match_table = mpu3050_i2c_of_match, .name = "mpu3050-i2c", - .pm = &mpu3050_dev_pm_ops, + .pm = pm_ptr(&mpu3050_dev_pm_ops), }, }; module_i2c_driver(mpu3050_i2c_driver);
Use the new EXPORT_RUNTIME_DEV_PM_OPS() macro. It allows the underlying dev_pm_ops struct as well as the suspend/resume callbacks to be detected as dead code in the case where CONFIG_PM is disabled, without having to wrap everything inside #ifdef CONFIG_PM guards. Signed-off-by: Paul Cercueil <paul@crapouillou.net> --- drivers/iio/gyro/mpu3050-core.c | 13 ++++--------- drivers/iio/gyro/mpu3050-i2c.c | 2 +- 2 files changed, 5 insertions(+), 10 deletions(-)