@@ -40,6 +40,7 @@
#define BMA400_INT_STAT1_REG 0x0f
#define BMA400_INT_STAT2_REG 0x10
#define BMA400_INT12_MAP_REG 0x23
+#define BMA400_INT_ENG_OVRUN_MSK BIT(4)
/* Temperature register */
#define BMA400_TEMP_DATA_REG 0x11
@@ -105,6 +106,16 @@
#define BMA400_INT_GEN2_MSK BIT(3)
#define BMA400_GEN_HYST_MSK GENMASK(1, 0)
+/* TAP config registers */
+#define BMA400_TAP_CONFIG 0x57
+#define BMA400_TAP_CONFIG1 0x58
+#define BMA400_S_TAP_MSK BIT(2)
+#define BMA400_D_TAP_MSK BIT(3)
+#define BMA400_INT_S_TAP_MSK BIT(10)
+#define BMA400_INT_D_TAP_MSK BIT(11)
+#define BMA400_TAP_SEN_MSK GENMASK(2, 0)
+#define BMA400_TAP_QUITE_MSK GENMASK(3, 2)
+
/*
* BMA400_SCALE_MIN macro value represents m/s^2 for 1 LSB before
* converting to micro values for +-2g range.
@@ -88,6 +88,7 @@ struct bma400_data {
bool step_event_en;
bool activity_event_en;
unsigned int generic_event_en;
+ unsigned int tap_event_en;
/* Correct time stamp alignment */
struct {
__le16 buff[3];
@@ -187,6 +188,14 @@ static const struct iio_chan_spec_ext_info bma400_ext_info[] = {
{ }
};
+static const struct iio_event_spec bma400_tap_event = {
+ .type = IIO_EV_TYPE_CHANGE,
+ .dir = IIO_EV_DIR_NONE,
+ .mask_separate = BIT(IIO_EV_INFO_ENABLE),
+ .mask_shared_by_type = BIT(IIO_EV_INFO_VALUE) |
+ BIT(IIO_EV_INFO_PERIOD),
+};
+
static const struct iio_event_spec bma400_step_detect_event = {
.type = IIO_EV_TYPE_CHANGE,
.dir = IIO_EV_DIR_NONE,
@@ -251,6 +260,19 @@ static const struct iio_event_spec bma400_accel_event[] = {
.num_event_specs = 1, \
}
+/*
+ * Single Tap and Double Tap events needs to be captured instantly, so only
+ * events are being configured.
+ */
+#define BMA400_TAP_CHANNEL(_chan2) { \
+ .type = IIO_TAP, \
+ .modified = 1, \
+ .channel2 = _chan2, \
+ .scan_index = -1, /* No buffer support */ \
+ .event_spec = &bma400_tap_event, \
+ .num_event_specs = 1, \
+}
+
static const struct iio_chan_spec bma400_channels[] = {
BMA400_ACC_CHANNEL(0, X),
BMA400_ACC_CHANNEL(1, Y),
@@ -278,6 +300,8 @@ static const struct iio_chan_spec bma400_channels[] = {
BMA400_ACTIVITY_CHANNEL(IIO_MOD_STILL),
BMA400_ACTIVITY_CHANNEL(IIO_MOD_WALKING),
BMA400_ACTIVITY_CHANNEL(IIO_MOD_RUNNING),
+ BMA400_TAP_CHANNEL(IIO_MOD_TAP_SINGLE),
+ BMA400_TAP_CHANNEL(IIO_MOD_TAP_DOUBLE),
IIO_CHAN_SOFT_TIMESTAMP(4),
};
@@ -407,6 +431,14 @@ static int bma400_set_accel_output_data_rate(struct bma400_data *data,
unsigned int val;
int ret;
+ /*
+ * No need to change ODR when tap event is enabled because
+ * tap interrupt is operating with the data rate of 200Hz.
+ * See datasheet page 124.
+ */
+ if (data->tap_event_en)
+ return -EBUSY;
+
if (hz >= BMA400_ACC_ODR_MIN_WHOLE_HZ) {
if (uhz || hz > BMA400_ACC_ODR_MAX_HZ)
return -EINVAL;
@@ -1019,6 +1051,15 @@ static int bma400_read_event_config(struct iio_dev *indio_dev,
return data->step_event_en;
case IIO_ACTIVITY:
return data->activity_event_en;
+ case IIO_TAP:
+ switch (chan->channel2) {
+ case IIO_MOD_TAP_SINGLE:
+ return FIELD_GET(BMA400_S_TAP_MSK, data->tap_event_en);
+ case IIO_MOD_TAP_DOUBLE:
+ return FIELD_GET(BMA400_D_TAP_MSK, data->tap_event_en);
+ default:
+ return -EINVAL;
+ }
default:
return -EINVAL;
}
@@ -1101,6 +1142,74 @@ static int bma400_activity_event_en(struct bma400_data *data,
return 0;
}
+static int bma400_tap_event_enable(struct bma400_data *data,
+ enum iio_modifier mod, int state)
+{
+ int ret;
+ unsigned int mask, field_value;
+
+ if (data->power_mode == POWER_MODE_SLEEP)
+ return -EBUSY;
+
+ /*
+ * acc_filt1 is the data source for the tap interrupt and it is
+ * operating on an input data rate of 200Hz.
+ */
+ if (!data->tap_event_en) {
+ ret = bma400_set_accel_output_data_rate(data, 200, 0);
+ if (ret)
+ return ret;
+ }
+
+ ret = regmap_update_bits(data->regmap, BMA400_INT12_MAP_REG,
+ BMA400_S_TAP_MSK,
+ FIELD_PREP(BMA400_S_TAP_MSK, state));
+ if (ret)
+ return ret;
+
+ switch (mod) {
+ case IIO_MOD_TAP_SINGLE:
+ mask = BMA400_S_TAP_MSK;
+ set_mask_bits(&field_value, BMA400_S_TAP_MSK,
+ FIELD_PREP(BMA400_S_TAP_MSK, state));
+ break;
+ case IIO_MOD_TAP_DOUBLE:
+ mask = BMA400_D_TAP_MSK;
+ set_mask_bits(&field_value, BMA400_D_TAP_MSK,
+ FIELD_PREP(BMA400_D_TAP_MSK, state));
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ ret = regmap_update_bits(data->regmap, BMA400_INT_CONFIG1_REG, mask,
+ field_value);
+ if (ret)
+ return ret;
+
+ set_mask_bits(&data->tap_event_en, mask, field_value);
+ return 0;
+}
+
+static int bma400_disable_adv_interrupt(struct bma400_data *data)
+{
+ int ret;
+
+ ret = regmap_write(data->regmap, BMA400_INT_CONFIG0_REG, 0);
+ if (ret)
+ return ret;
+
+ ret = regmap_write(data->regmap, BMA400_INT_CONFIG1_REG, 0);
+ if (ret)
+ return ret;
+
+ data->tap_event_en = 0;
+ data->generic_event_en = 0;
+ data->step_event_en = 0;
+ data->activity_event_en = 0;
+ return 0;
+}
+
static int bma400_write_event_config(struct iio_dev *indio_dev,
const struct iio_chan_spec *chan,
enum iio_event_type type,
@@ -1132,6 +1241,11 @@ static int bma400_write_event_config(struct iio_dev *indio_dev,
data->activity_event_en = state;
mutex_unlock(&data->mutex);
return 0;
+ case IIO_TAP:
+ mutex_lock(&data->mutex);
+ ret = bma400_tap_event_enable(data, chan->channel2, state);
+ mutex_unlock(&data->mutex);
+ return ret;
default:
return -EINVAL;
}
@@ -1196,6 +1310,23 @@ static int bma400_read_event_value(struct iio_dev *indio_dev,
default:
return -EINVAL;
}
+ case IIO_TAP:
+ switch (info) {
+ case IIO_EV_INFO_VALUE:
+ ret = regmap_read(data->regmap, BMA400_TAP_CONFIG, val);
+ if (ret)
+ return ret;
+ *val = FIELD_GET(BMA400_TAP_SEN_MSK, *val);
+ return IIO_VAL_INT;
+ case IIO_EV_INFO_PERIOD:
+ ret = regmap_read(data->regmap, BMA400_TAP_CONFIG1, val);
+ if (ret)
+ return ret;
+ *val = FIELD_GET(BMA400_TAP_QUITE_MSK, *val);
+ return IIO_VAL_INT;
+ default:
+ return -EINVAL;
+ }
default:
return -EINVAL;
}
@@ -1248,6 +1379,29 @@ static int bma400_write_event_value(struct iio_dev *indio_dev,
default:
return -EINVAL;
}
+ case IIO_TAP:
+ switch (info) {
+ case IIO_EV_INFO_VALUE:
+ if (val < 0 || val > 7)
+ return -EINVAL;
+
+ return regmap_update_bits(data->regmap,
+ BMA400_TAP_CONFIG,
+ BMA400_TAP_SEN_MSK,
+ FIELD_PREP(BMA400_TAP_SEN_MSK,
+ val));
+ case IIO_EV_INFO_PERIOD:
+ if (val < 0 || val > 3)
+ return -EINVAL;
+
+ return regmap_update_bits(data->regmap,
+ BMA400_TAP_CONFIG1,
+ BMA400_TAP_QUITE_MSK,
+ FIELD_PREP(BMA400_TAP_QUITE_MSK,
+ val));
+ default:
+ return -EINVAL;
+ }
default:
return -EINVAL;
}
@@ -1336,6 +1490,7 @@ static irqreturn_t bma400_interrupt(int irq, void *private)
struct bma400_data *data = iio_priv(indio_dev);
s64 timestamp = iio_get_time_ns(indio_dev);
unsigned int act, ev_dir = IIO_EV_DIR_NONE;
+ unsigned int ev_mod = IIO_NO_MOD;
int ret;
/* Lock to protect the data->status */
@@ -1350,6 +1505,27 @@ static irqreturn_t bma400_interrupt(int irq, void *private)
if (ret || !data->status)
goto unlock_err;
+ /* Disable all advance interrupts if interrupt engine overrun occurs */
+ if (FIELD_GET(BMA400_INT_ENG_OVRUN_MSK, le16_to_cpu(data->status))) {
+ bma400_disable_adv_interrupt(data);
+ dev_err(data->dev, "Interrupt engine overrun\n");
+ goto unlock_err;
+ }
+
+ if (FIELD_GET(BMA400_INT_S_TAP_MSK, le16_to_cpu(data->status)))
+ ev_mod = IIO_MOD_TAP_SINGLE;
+
+ if (FIELD_GET(BMA400_INT_D_TAP_MSK, le16_to_cpu(data->status)))
+ ev_mod = IIO_MOD_TAP_DOUBLE;
+
+ if (ev_mod != IIO_NO_MOD) {
+ iio_push_event(indio_dev,
+ IIO_MOD_EVENT_CODE(IIO_TAP, 0,
+ ev_mod, IIO_EV_TYPE_CHANGE,
+ IIO_EV_DIR_NONE),
+ timestamp);
+ }
+
if (FIELD_GET(BMA400_INT_GEN1_MSK, le16_to_cpu(data->status)))
ev_dir = IIO_EV_DIR_RISING;
Add support for single and double tap events based on the tap threshold value and minimum quite time value between the taps. INT1 pin is used to interrupt and event is pushed to userspace. Signed-off-by: Jagath Jog J <jagathjog1996@gmail.com> --- drivers/iio/accel/bma400.h | 11 ++ drivers/iio/accel/bma400_core.c | 176 ++++++++++++++++++++++++++++++++ 2 files changed, 187 insertions(+)