@@ -245,6 +245,24 @@ &blsp2_uart1 {
status = "okay";
};
+&blsp2_i2c2 {
+ status = "okay";
+
+ proximity@29 {
+ compatible = "st,vl53l0x";
+ reg = <0x29>;
+
+ interrupt-parent = <&tlmm>;
+ interrupts = <22 IRQ_TYPE_EDGE_FALLING>;
+
+ reset-gpios = <&tlmm 27 GPIO_ACTIVE_LOW>;
+ vdd-supply = <&cam_vio_vreg>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&tof_int &tof_reset>;
+ };
+};
+
&ibb {
regulator-min-microamp = <800000>;
regulator-max-microamp = <800000>;
@@ -606,6 +624,14 @@ cam0_vdig_default: cam0-vdig-default {
drive-strength = <2>;
};
+ tof_int: tof-int {
+ pins = "gpio22";
+ function = "gpio";
+ bias-pull-up;
+ drive-strength = <2>;
+ input-enable;
+ };
+
cam1_vdig_default: cam1-vdig-default {
pins = "gpio25";
function = "gpio";
@@ -613,6 +639,13 @@ cam1_vdig_default: cam1-vdig-default {
drive-strength = <2>;
};
+ tof_reset: tof-reset {
+ pins = "gpio27";
+ function = "gpio";
+ bias-disable;
+ drive-strength = <2>;
+ };
+
hall_sensor0_default: acc-cover-open {
pins = "gpio124";
function = "gpio";
This patch adds device tree support for the VL53L0X ToF sensor found on all Yoshino devices. Signed-off-by: Markuss Broks <markuss.broks@gmail.com> --- .../dts/qcom/msm8998-sony-xperia-yoshino.dtsi | 33 +++++++++++++++++++ 1 file changed, 33 insertions(+)