diff mbox series

[2/8] iio:adc:ti-ads1015: Improve error reporting for problems during .remove()

Message ID 20220515155929.338656-3-u.kleine-koenig@pengutronix.de (mailing list archive)
State Accepted
Headers show
Series iio: Improve error reporting for problems during .remove for various i2c drivers | expand

Commit Message

Uwe Kleine-König May 15, 2022, 3:59 p.m. UTC
Returning an error value in an i2c remove callback results in a generic
error message being emitted by the i2c core, but otherwise it doesn't
make a difference. The device goes away anyhow and the devm cleanups are

So instead of triggering the generic i2c error message, emit a more
helpful message if a problem occurs and return 0 to suppress the generic

This patch is a preparation for making i2c remove callbacks return void.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
 drivers/iio/adc/ti-ads1015.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)
diff mbox series


diff --git a/drivers/iio/adc/ti-ads1015.c b/drivers/iio/adc/ti-ads1015.c
index 068efbce1710..f8021d99db64 100644
--- a/drivers/iio/adc/ti-ads1015.c
+++ b/drivers/iio/adc/ti-ads1015.c
@@ -1061,6 +1061,7 @@  static int ads1015_remove(struct i2c_client *client)
 	struct iio_dev *indio_dev = i2c_get_clientdata(client);
 	struct ads1015_data *data = iio_priv(indio_dev);
+	int ret;
@@ -1068,7 +1069,12 @@  static int ads1015_remove(struct i2c_client *client)
 	/* power down single shot mode */
-	return ads1015_set_conv_mode(data, ADS1015_SINGLESHOT);
+	ret = ads1015_set_conv_mode(data, ADS1015_SINGLESHOT);
+	if (ret)
+		dev_warn(&client->dev, "Failed to power down (%pe)\n",
+			 ERR_PTR(ret));
+	return 0;
 #ifdef CONFIG_PM