From patchwork Wed May 18 14:48:17 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Eddie James X-Patchwork-Id: 12853739 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 58DBDC433EF for ; Wed, 18 May 2022 14:49:04 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S238958AbiEROtC (ORCPT ); Wed, 18 May 2022 10:49:02 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:46182 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S239008AbiEROtC (ORCPT ); Wed, 18 May 2022 10:49:02 -0400 Received: from mx0a-001b2d01.pphosted.com (mx0b-001b2d01.pphosted.com [148.163.158.5]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 202391339ED; Wed, 18 May 2022 07:49:00 -0700 (PDT) Received: from pps.filterd (m0098414.ppops.net [127.0.0.1]) by mx0b-001b2d01.pphosted.com (8.17.1.5/8.17.1.5) with ESMTP id 24IEM1T5030026; Wed, 18 May 2022 14:48:24 GMT DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=ibm.com; h=from : to : cc : subject : date : message-id : in-reply-to : references : mime-version : content-transfer-encoding; s=pp1; bh=SeJ64ex+8mlCmScFezbVIsrxG7SvqcCr/Utg5n0dsmA=; b=hZIfOicjtefjkyvlL2n2g8569GR0DvHTO5BLS5jwjCtYSUkfuLO3LQKOMYpUPzJKa0/o /6yIeGKnMvrYjvUYk2L4IjmsFhV9oME2FsiOZIbpi5FEgTOJZXqZj+CtbyNCd13lVcrK z0p/OQHrB9VL7f3G606GfkSTi/iAx7TZ17it2kI0P6w40n4B6JDpXSQJSXQJEltgZGha rFFCqsk7zRW2HQbVpG5EcQcSXVssYUOZW+xCbQvB+t1Yfi4tEaSY/V0sjXIWzoZr7WdF zEzgOUczf8Tyd5sU/Y7MWjw1p0NWq172TRCgLG0bRWyZPolTD4x+1PV98t4XwBIFLG06 GQ== Received: from ppma04wdc.us.ibm.com (1a.90.2fa9.ip4.static.sl-reverse.com [169.47.144.26]) by mx0b-001b2d01.pphosted.com (PPS) with ESMTPS id 3g52gh8q3u-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Wed, 18 May 2022 14:48:23 +0000 Received: from pps.filterd (ppma04wdc.us.ibm.com [127.0.0.1]) by ppma04wdc.us.ibm.com (8.16.1.2/8.16.1.2) with SMTP id 24IEce60017704; Wed, 18 May 2022 14:48:23 GMT Received: from b03cxnp08025.gho.boulder.ibm.com (b03cxnp08025.gho.boulder.ibm.com [9.17.130.17]) by ppma04wdc.us.ibm.com with ESMTP id 3g4wp59td2-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Wed, 18 May 2022 14:48:23 +0000 Received: from b03ledav005.gho.boulder.ibm.com (b03ledav005.gho.boulder.ibm.com [9.17.130.236]) by b03cxnp08025.gho.boulder.ibm.com (8.14.9/8.14.9/NCO v10.0) with ESMTP id 24IEmM7736307432 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-GCM-SHA384 bits=256 verify=OK); Wed, 18 May 2022 14:48:22 GMT Received: from b03ledav005.gho.boulder.ibm.com (unknown [127.0.0.1]) by IMSVA (Postfix) with ESMTP id 7C2ECBE053; Wed, 18 May 2022 14:48:22 +0000 (GMT) Received: from b03ledav005.gho.boulder.ibm.com (unknown [127.0.0.1]) by IMSVA (Postfix) with ESMTP id 314D4BE056; Wed, 18 May 2022 14:48:22 +0000 (GMT) Received: from v0005c16.aus.stglabs.ibm.com (unknown [9.163.6.139]) by b03ledav005.gho.boulder.ibm.com (Postfix) with ESMTP; Wed, 18 May 2022 14:48:22 +0000 (GMT) From: Eddie James To: linux-iio@vger.kernel.org Cc: linux-kernel@vger.kernel.org, lars@metafoo.de, jic23@kernel.org, joel@jms.id.au, Eddie James Subject: [PATCH v2 1/2] iio: pressure: dps310: Refactor startup procedure Date: Wed, 18 May 2022 09:48:17 -0500 Message-Id: <20220518144818.12957-2-eajames@linux.ibm.com> X-Mailer: git-send-email 2.27.0 In-Reply-To: <20220518144818.12957-1-eajames@linux.ibm.com> References: <20220518144818.12957-1-eajames@linux.ibm.com> MIME-Version: 1.0 X-TM-AS-GCONF: 00 X-Proofpoint-ORIG-GUID: kFQlD-vwcGh_T1QXlqI92fV_JiyHpkxF X-Proofpoint-GUID: kFQlD-vwcGh_T1QXlqI92fV_JiyHpkxF X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.205,Aquarius:18.0.874,Hydra:6.0.486,FMLib:17.11.64.514 definitions=2022-05-18_05,2022-05-17_02,2022-02-23_01 X-Proofpoint-Spam-Details: rule=outbound_notspam policy=outbound score=0 mlxscore=0 phishscore=0 impostorscore=0 spamscore=0 suspectscore=0 lowpriorityscore=0 bulkscore=0 adultscore=0 clxscore=1015 priorityscore=1501 mlxlogscore=999 malwarescore=0 classifier=spam adjust=0 reason=mlx scancount=1 engine=8.12.0-2202240000 definitions=main-2205180087 Precedence: bulk List-ID: X-Mailing-List: linux-iio@vger.kernel.org Move the startup procedure into a function, and correct a missing check on the return code for writing the PRS_CFG register. Signed-off-by: Eddie James --- drivers/iio/pressure/dps310.c | 192 ++++++++++++++++++---------------- 1 file changed, 103 insertions(+), 89 deletions(-) diff --git a/drivers/iio/pressure/dps310.c b/drivers/iio/pressure/dps310.c index 36fb7ae0d0a9..f79b274bb38d 100644 --- a/drivers/iio/pressure/dps310.c +++ b/drivers/iio/pressure/dps310.c @@ -159,6 +159,106 @@ static int dps310_get_coefs(struct dps310_data *data) return 0; } +/* + * Some verions of chip will read temperatures in the ~60C range when + * its actually ~20C. This is the manufacturer recommended workaround + * to correct the issue. The registers used below are undocumented. + */ +static int dps310_temp_workaround(struct dps310_data *data) +{ + int rc; + int reg; + + rc = regmap_read(data->regmap, 0x32, ®); + if (rc < 0) + return rc; + + /* + * If bit 1 is set then the device is okay, and the workaround does not + * need to be applied + */ + if (reg & BIT(1)) + return 0; + + rc = regmap_write(data->regmap, 0x0e, 0xA5); + if (rc < 0) + return rc; + + rc = regmap_write(data->regmap, 0x0f, 0x96); + if (rc < 0) + return rc; + + rc = regmap_write(data->regmap, 0x62, 0x02); + if (rc < 0) + return rc; + + rc = regmap_write(data->regmap, 0x0e, 0x00); + if (rc < 0) + return rc; + + return regmap_write(data->regmap, 0x0f, 0x00); +} + +static int dps310_startup(struct dps310_data *data) +{ + int rc; + int ready; + + /* + * Set up pressure sensor in single sample, one measurement per second + * mode + */ + rc = regmap_write(data->regmap, DPS310_PRS_CFG, 0); + if (rc < 0) + return rc; + + /* + * Set up external (MEMS) temperature sensor in single sample, one + * measurement per second mode + */ + rc = regmap_write(data->regmap, DPS310_TMP_CFG, DPS310_TMP_EXT); + if (rc < 0) + return rc; + + /* Temp and pressure shifts are disabled when PRC <= 8 */ + rc = regmap_write_bits(data->regmap, DPS310_CFG_REG, + DPS310_PRS_SHIFT_EN | DPS310_TMP_SHIFT_EN, 0); + if (rc < 0) + return rc; + + /* MEAS_CFG doesn't update correctly unless first written with 0 */ + rc = regmap_write_bits(data->regmap, DPS310_MEAS_CFG, + DPS310_MEAS_CTRL_BITS, 0); + if (rc < 0) + return rc; + + /* Turn on temperature and pressure measurement in the background */ + rc = regmap_write_bits(data->regmap, DPS310_MEAS_CFG, + DPS310_MEAS_CTRL_BITS, DPS310_PRS_EN | + DPS310_TEMP_EN | DPS310_BACKGROUND); + if (rc < 0) + return rc; + + /* + * Calibration coefficients required for reporting temperature. + * They are available 40ms after the device has started + */ + rc = regmap_read_poll_timeout(data->regmap, DPS310_MEAS_CFG, ready, + ready & DPS310_COEF_RDY, 10000, 40000); + if (rc < 0) + return rc; + + rc = dps310_get_coefs(data); + if (rc < 0) + return rc; + + rc = dps310_temp_workaround(data); + if (rc < 0) + return rc; + + return 0; +} + static int dps310_get_pres_precision(struct dps310_data *data) { int rc; @@ -677,52 +777,12 @@ static const struct iio_info dps310_info = { .write_raw = dps310_write_raw, }; -/* - * Some verions of chip will read temperatures in the ~60C range when - * its actually ~20C. This is the manufacturer recommended workaround - * to correct the issue. The registers used below are undocumented. - */ -static int dps310_temp_workaround(struct dps310_data *data) -{ - int rc; - int reg; - - rc = regmap_read(data->regmap, 0x32, ®); - if (rc < 0) - return rc; - - /* - * If bit 1 is set then the device is okay, and the workaround does not - * need to be applied - */ - if (reg & BIT(1)) - return 0; - - rc = regmap_write(data->regmap, 0x0e, 0xA5); - if (rc < 0) - return rc; - - rc = regmap_write(data->regmap, 0x0f, 0x96); - if (rc < 0) - return rc; - - rc = regmap_write(data->regmap, 0x62, 0x02); - if (rc < 0) - return rc; - - rc = regmap_write(data->regmap, 0x0e, 0x00); - if (rc < 0) - return rc; - - return regmap_write(data->regmap, 0x0f, 0x00); -} - static int dps310_probe(struct i2c_client *client, const struct i2c_device_id *id) { struct dps310_data *data; struct iio_dev *iio; - int rc, ready; + int rc; iio = devm_iio_device_alloc(&client->dev, sizeof(*data)); if (!iio) @@ -747,54 +807,8 @@ static int dps310_probe(struct i2c_client *client, if (rc) return rc; - /* - * Set up pressure sensor in single sample, one measurement per second - * mode - */ - rc = regmap_write(data->regmap, DPS310_PRS_CFG, 0); - - /* - * Set up external (MEMS) temperature sensor in single sample, one - * measurement per second mode - */ - rc = regmap_write(data->regmap, DPS310_TMP_CFG, DPS310_TMP_EXT); - if (rc < 0) - return rc; - - /* Temp and pressure shifts are disabled when PRC <= 8 */ - rc = regmap_write_bits(data->regmap, DPS310_CFG_REG, - DPS310_PRS_SHIFT_EN | DPS310_TMP_SHIFT_EN, 0); - if (rc < 0) - return rc; - - /* MEAS_CFG doesn't update correctly unless first written with 0 */ - rc = regmap_write_bits(data->regmap, DPS310_MEAS_CFG, - DPS310_MEAS_CTRL_BITS, 0); - if (rc < 0) - return rc; - - /* Turn on temperature and pressure measurement in the background */ - rc = regmap_write_bits(data->regmap, DPS310_MEAS_CFG, - DPS310_MEAS_CTRL_BITS, DPS310_PRS_EN | - DPS310_TEMP_EN | DPS310_BACKGROUND); - if (rc < 0) - return rc; - - /* - * Calibration coefficients required for reporting temperature. - * They are available 40ms after the device has started - */ - rc = regmap_read_poll_timeout(data->regmap, DPS310_MEAS_CFG, ready, - ready & DPS310_COEF_RDY, 10000, 40000); - if (rc < 0) - return rc; - - rc = dps310_get_coefs(data); - if (rc < 0) - return rc; - - rc = dps310_temp_workaround(data); - if (rc < 0) + rc = dps310_startup(data); + if (rc) return rc; rc = devm_iio_device_register(&client->dev, iio);