diff mbox series

[v3,12/17] staging: iio: cdc: ad7746: Switch from _offset to _zeropoint for differential channels.

Message ID 20220626122938.582107-13-jic23@kernel.org (mailing list archive)
State Accepted
Headers show
Series [v3,01/17] iio: core: Increase precision of IIO_VAL_FRACTIONAL_LOG2 when possible | expand

Commit Message

Jonathan Cameron June 26, 2022, 12:29 p.m. UTC 
From: Jonathan Cameron <Jonathan.Cameron@huawei.com>

As this offset is applied equally to both lines of the differential
pair, _ofset should not be used. Use the new ABI _zeropoint instead
to avoid userspace software applying this value when calculating
real value = (_raw + _offset) * _scale

Also add a comment to explain why an offset of 0x800000 is applied
within the driver rather than exposed to userspace.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
---
 drivers/staging/iio/cdc/ad7746.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/drivers/staging/iio/cdc/ad7746.c b/drivers/staging/iio/cdc/ad7746.c
index 2b27a2cb807c..d8fbb8a85bbf 100644
--- a/drivers/staging/iio/cdc/ad7746.c
+++ b/drivers/staging/iio/cdc/ad7746.c
@@ -207,7 +207,7 @@  static const struct iio_chan_spec ad7746_channels[] = {
 		.channel = 0,
 		.channel2 = 2,
 		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
-		BIT(IIO_CHAN_INFO_CALIBSCALE) | BIT(IIO_CHAN_INFO_OFFSET),
+		BIT(IIO_CHAN_INFO_CALIBSCALE) | BIT(IIO_CHAN_INFO_ZEROPOINT),
 		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_CALIBBIAS) |
 		BIT(IIO_CHAN_INFO_SCALE) | BIT(IIO_CHAN_INFO_SAMP_FREQ),
 		.address = CIN1_DIFF,
@@ -229,7 +229,7 @@  static const struct iio_chan_spec ad7746_channels[] = {
 		.channel = 1,
 		.channel2 = 3,
 		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
-		BIT(IIO_CHAN_INFO_CALIBSCALE) | BIT(IIO_CHAN_INFO_OFFSET),
+		BIT(IIO_CHAN_INFO_CALIBSCALE) | BIT(IIO_CHAN_INFO_ZEROPOINT),
 		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_CALIBBIAS) |
 		BIT(IIO_CHAN_INFO_SCALE) | BIT(IIO_CHAN_INFO_SAMP_FREQ),
 		.address = CIN2_DIFF,
@@ -506,6 +506,7 @@  static int ad7746_write_raw(struct iio_dev *indio_dev,
 
 		return 0;
 	case IIO_CHAN_INFO_OFFSET:
+	case IIO_CHAN_INFO_ZEROPOINT:
 		if (val < 0 || val > 43008000) /* 21pF */
 			return -EINVAL;
 
@@ -581,6 +582,10 @@  static int ad7746_read_channel(struct iio_dev *indio_dev,
 	if (ret < 0)
 		return ret;
 
+	/*
+	 * Offset applied internally becaue the _offset userspace interface is
+	 * needed for the CAP DACs which apply a controllable offset.
+	 */
 	*val = get_unaligned_be24(data) - 0x800000;
 
 	return 0;
@@ -637,6 +642,7 @@  static int ad7746_read_raw(struct iio_dev *indio_dev,
 
 		return IIO_VAL_INT;
 	case IIO_CHAN_INFO_OFFSET:
+	case IIO_CHAN_INFO_ZEROPOINT:
 		*val = FIELD_GET(AD7746_CAPDAC_DACP_MASK,
 				 chip->capdac[chan->channel][chan->differential]) * 338646;