diff mbox series

[v2,2/2] drivers: iio: dac: Add AD5754 DAC driver

Message ID 20221104172343.617690-3-ciprian.regus@analog.com (mailing list archive)
State Changes Requested
Headers show
Series Add support for the AD5754 DAC | expand

Commit Message

Ciprian Regus Nov. 4, 2022, 5:23 p.m. UTC
The AD5724/AD5734/AD5754 are quad, 12-/14-/16-bit, serial
input, voltage output DACs. The devices operate from single-
supply voltages from +4.5 V up to +16.5 V or dual-supply
voltages from ±4.5 V up to ±16.5 V. The input coding is
user-selectable twos complement or offset binary for a bipolar
output (depending on the state of Pin BIN/2sComp), and straight
binary for a unipolar output.

Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/AD5724_5734_5754.pdf
Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/ad5722_5732_5752.pdf
Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/ad5724r_5734r_5754r.pdf
Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/AD5722R_5732R_5752R.pdf
Signed-off-by: Ciprian Regus <ciprian.regus@analog.com>
---
changes in v2:
 - replaced the entire supported devices list in Kconfig with 'and similar'.
 - mentioned the devices that have internal references as being supported.
 - added the _mV suffix to the AD5754_INT_VREF macro.
 - changed the macros by using numbers (where it was needed) instead of GENMASK or BIT.
 - declared global variables as static.
 - added 2 different arrays for 2 and 4 channels instead of using an array of arrays.
 - set the CLR GPIO to high.
 - removed the dev field in the state struct.
 - casted the chip_info struct (probe function) to void *, so the line will look better.
 - added the uV_PER_mV macro for vref mV conversions.
 - removed commas from terminator lines.
 - used module_spi_driver() instead of module_driver().
 - powered off the internal reference or regulator and channels output on remove.
 - removed the ad5754_int_vref_enable() function.
 - fixed some probe return values.
 - removed the dac_max_code and sub_lsb caching.
 - simplified the scale attribute computation.
 - set the max_register field in the regmap_config struct. 
 MAINTAINERS              |   8 +
 drivers/iio/dac/Kconfig  |  12 +
 drivers/iio/dac/Makefile |   1 +
 drivers/iio/dac/ad5754.c | 647 +++++++++++++++++++++++++++++++++++++++
 4 files changed, 668 insertions(+)
 create mode 100644 drivers/iio/dac/ad5754.c

Comments

Jonathan Cameron Nov. 5, 2022, 1:20 p.m. UTC | #1
On Fri, 4 Nov 2022 19:23:43 +0200
Ciprian Regus <ciprian.regus@analog.com> wrote:

> The AD5724/AD5734/AD5754 are quad, 12-/14-/16-bit, serial
> input, voltage output DACs. The devices operate from single-
> supply voltages from +4.5 V up to +16.5 V or dual-supply
> voltages from ±4.5 V up to ±16.5 V. The input coding is
> user-selectable twos complement or offset binary for a bipolar
> output (depending on the state of Pin BIN/2sComp), and straight
> binary for a unipolar output.

Trivial, but for patch descriptions, normal wrap is around 72-75 characters.
This looks a bit short so could be rewrapped to be a tiny bit nicer.
(I'd fix that up whilst applying but given you are going to be doing a v3
great if you can tidy it up!)

Some comments inline. Looking pretty good in general.

> 
> Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/AD5724_5734_5754.pdf
> Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/ad5722_5732_5752.pdf
> Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/ad5724r_5734r_5754r.pdf
> Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/AD5722R_5732R_5752R.pdf
> Signed-off-by: Ciprian Regus <ciprian.regus@analog.com>
> ---
> changes in v2:
>  - replaced the entire supported devices list in Kconfig with 'and similar'.
>  - mentioned the devices that have internal references as being supported.
>  - added the _mV suffix to the AD5754_INT_VREF macro.
>  - changed the macros by using numbers (where it was needed) instead of GENMASK or BIT.
>  - declared global variables as static.
>  - added 2 different arrays for 2 and 4 channels instead of using an array of arrays.
>  - set the CLR GPIO to high.
>  - removed the dev field in the state struct.
>  - casted the chip_info struct (probe function) to void *, so the line will look better.
>  - added the uV_PER_mV macro for vref mV conversions.
>  - removed commas from terminator lines.
>  - used module_spi_driver() instead of module_driver().
>  - powered off the internal reference or regulator and channels output on remove.
>  - removed the ad5754_int_vref_enable() function.
>  - fixed some probe return values.
>  - removed the dac_max_code and sub_lsb caching.
>  - simplified the scale attribute computation.
>  - set the max_register field in the regmap_config struct. 
>  MAINTAINERS              |   8 +
>  drivers/iio/dac/Kconfig  |  12 +
>  drivers/iio/dac/Makefile |   1 +
>  drivers/iio/dac/ad5754.c | 647 +++++++++++++++++++++++++++++++++++++++
>  4 files changed, 668 insertions(+)
>  create mode 100644 drivers/iio/dac/ad5754.c
> 
...

> diff --git a/drivers/iio/dac/ad5754.c b/drivers/iio/dac/ad5754.c
> new file mode 100644
> index 000000000000..ee52fcbef3a2
> --- /dev/null
> +++ b/drivers/iio/dac/ad5754.c
> @@ -0,0 +1,647 @@

> +
> +/*
> + * The channel addresses for 2 channel chip variants are not sequential:
> + *      A2 A1 A0 Channel
> + *	0  0  0   DAC A
> + *	0  1  0   DAC B
> + *
> + * This is not the case for 4 channel chips:
> + *	A2 A1 A0 Channel
> + *	0  0  0   DAC A
> + *	0  0  1   DAC B
> + *	0  1  0   DAC C
> + *	0  1  1   DAC D
> + */

> +
> +static int ad5754_reg_read(void *context, unsigned int reg, unsigned int *val)
> +{
> +	struct ad5754_state *st = context;
> +	struct spi_transfer xfer[] = {
> +		{
> +			.tx_buf = st->buff,
> +			.len = AD5754_FRAME_SIZE,
> +		},
> +	};
> +	int ret;
> +
> +	st->buff[0] = AD5754_REG_RD | reg;
> +	ret = spi_sync_transfer(st->spi, xfer, 1);
> +	if (ret)
> +		return ret;

We have two writes in here that are ultimately triggered from userspace sysfs
writes.  They aren't necessarily serialized.  So I'd expect to see some
locking in here as we can't rely on the bus locking (it doesn't know the
two spi_sync_transfer() are related obviously!)

> +
> +	xfer->rx_buf = st->buff;
> +	st->buff[0] = AD5754_REG_ADDR(AD5754_CTRL_REG, AD5754_NOOP_FUNC);
> +	st->buff[1] = 0;
> +	st->buff[2] = 0;
> +	ret = spi_sync_transfer(st->spi, xfer, 1);
> +	if (ret)
> +		return ret;
> +
> +	*val = get_unaligned_be16(&st->buff[1]);
> +
> +	return 0;
> +};

> +static int ad5754_set_dac_code(struct ad5754_state *st, u32 channel, u32 code)
> +{
> +	u32 sub_lsb = AD5754_MAX_RESOLUTION - st->chip_info->resolution;
> +	struct reg_sequence xfer_seq[2] = {
> +		{ AD5754_REG_ADDR(AD5754_DAC_REG, channel), code << sub_lsb },
> +		{ AD5754_REG_ADDR(AD5754_CTRL_REG, AD5754_LOAD_FUNC), 0 },
> +	};
> +
> +	return regmap_multi_reg_write(st->regmap, xfer_seq, 2);
ARRAY_SIZE() for that 2.

This is nice way of doing this.  I wonder how many other drivers
would benefit from similar use of regmap_multi_reg_write().

> +}
> +
> +static int ad5754_enable_channels(struct ad5754_state *st)
> +{
> +	struct fwnode_handle *channel_node;
> +	u32 real_channel;
> +	u32 power_reg;
> +	u32 index;
> +	int ret;
> +
> +	device_for_each_child_node(&st->spi->dev, channel_node) {
> +		ret = fwnode_property_read_u32(channel_node, "reg", &index);
> +		if (ret) {
> +			dev_err(&st->spi->dev, "Failed to read channel reg: %d\n", ret);
> +			goto free_node;
> +		}
> +		if (index >= st->chip_info->num_channels) {
> +			dev_err(&st->spi->dev, "Channel index %u is too large\n", index);
> +			goto free_node;
> +		}
> +
> +		ret = ad5754_real_ch(st, index, &real_channel);
> +		if (ret)
> +			goto free_node;
> +
> +		ret = ad5754_get_output_range(st, channel_node, index);
> +		if (ret)
> +			goto free_node;
> +
> +		ret = regmap_write_bits(st->regmap,
> +					AD5754_REG_ADDR(AD5754_RANGE_REG, real_channel),
> +					AD5754_RANGE_MASK, st->range_idx[index]);
> +		if (ret)
> +			goto free_node;
> +
> +		ret = regmap_read(st->regmap,
> +				  AD5754_REG_ADDR(AD5754_PWR_REG, AD5754_PU_ADDR),
> +				  &power_reg);
> +		if  (ret)
> +			goto free_node;
> +
> +		ret = regmap_update_bits(st->regmap,
> +					 AD5754_REG_ADDR(AD5754_PWR_REG, AD5754_PU_ADDR),
> +					 AD5754_PU_MASK, AD5754_PU_CH(real_channel) |
> +					 (power_reg & AD5754_PU_MASK));

This function should be side effect free if an error occurs on later channels.
So I'd expect to see any bits to do with enabling undone on the error path rather than
relying on a cleanup routine registered elsewhere.

> +		if (ret)
> +			goto free_node;
> +
> +		/* Channel power up delay */
> +		fsleep(10);

It's short enough that it probably doesn't matter, but do you need to do this for each
channel, or can you turn them all on and sleep only once?

> +	}
> +
> +	return 0;
> +
> +free_node:
> +	fwnode_handle_put(channel_node);
> +
> +	return ret;
> +}
> +

...

> +
> +static void ad5754_power_off(void *state)
> +{
> +	struct ad5754_state *st = state;
> +
> +	/* Power off the output for all channels */
> +	regmap_update_bits(st->regmap,
> +			   AD5754_REG_ADDR(AD5754_PWR_REG, AD5754_PU_ADDR),
> +			   AD5754_PU_MASK, FIELD_PREP(AD5754_PU_MASK, 0));

I think this first section is undoing what was configured in ad5754_enabled_channels()?
It presumably doesn't matter if we turn off channels when none have been turned on yet,
but from an ease of review point of view I'd prefer to see this callback split
into 2 (maybe 3) parts. Whether to separate the regulator disable vs internal ref
handling separately is less import (but might be slightly nicer) - but register
callbacks for that bit where you current register this one + register another callback
to do the power off above, only after ad5754_enable_channels().

That will bring the complexity that you'll need to make that function not have side effects
if an error occurs by turning these off manually there - the advantage is that the code
becomes easier to review / maintain as that is local.

> +
> +	if (!st->chip_info->internal_vref)
> +		regulator_disable(st->vref_reg);
> +	else
> +		regmap_update_bits(st->regmap,
> +				   AD5754_REG_ADDR(AD5754_PWR_REG, AD5754_PU_ADDR),
> +				   AD5754_INT_REF_MASK,
> +				   FIELD_PREP(AD5754_INT_REF_MASK, 0));
> +}
> +
> +static const struct iio_info ad5754_info = {
> +	.read_raw = &ad5754_read_raw,
> +	.write_raw = &ad5754_write_raw,
> +};
> +
> +static int ad5754_probe(struct spi_device *spi)
> +{
> +	struct device *dev = &spi->dev;
> +	struct iio_dev *indio_dev;
> +	struct ad5754_state *st;
> +	int ret;
> +
> +	indio_dev = devm_iio_device_alloc(dev, sizeof(*st));
> +	if (!indio_dev)
> +		return -ENOMEM;
> +
> +	st = iio_priv(indio_dev);
> +
> +	st->spi = spi;
> +	st->chip_info = device_get_match_data(dev);
> +	if (!st->chip_info)
> +		st->chip_info = (void *)spi_get_device_id(spi)->driver_data;
> +
> +	st->regmap = devm_regmap_init(dev, NULL, st, &ad5754_regmap_config);
> +	if (IS_ERR(st->regmap))
> +		return dev_err_probe(dev, PTR_ERR(st->regmap),
> +				     "Regmap init error\n");
> +
> +	st->clr_gpio = devm_gpiod_get_optional(dev, "clr", GPIOD_OUT_LOW);
> +	if (IS_ERR(st->clr_gpio))
> +		return PTR_ERR(st->clr_gpio);
> +
> +	/* Clear the DAC code registers */
> +	ret = regmap_write(st->regmap,
> +			   AD5754_REG_ADDR(AD5754_CTRL_REG, AD5754_CLEAR_FUNC),
> +			   0);
> +	if (ret)
> +		return ret;
> +
> +	st->vref_reg = devm_regulator_get_optional(dev, "vref");
> +	if (IS_ERR(st->vref_reg)) {
> +		if (!st->chip_info->internal_vref)
> +			return dev_err_probe(dev, PTR_ERR(st->vref_reg),
> +					     "Failed to get the vref regulator\n");
> +
> +		st->vref = AD5754_INT_VREF_mV;
> +		ret = regmap_update_bits(st->regmap,
> +					 AD5754_REG_ADDR(AD5754_PWR_REG, AD5754_PU_ADDR),
> +					 AD5754_INT_REF_MASK,
> +					 FIELD_PREP(AD5754_INT_REF_MASK, 1));
> +		if (ret)
> +			return ret;
> +	} else {
> +		ret = regulator_enable(st->vref_reg);
> +		if (ret)
> +			return dev_err_probe(dev, ret,
> +					     "Failed to enable the vref regulator\n");

As mentioned above, I would suggest thinking about splitting the unwinding of the two
if/else paths here given there is really no overlap in what needs to be done.
It will result in more code due to two callbacks, but be slightly easier to follow.

> +
> +		ret = regulator_get_voltage(st->vref_reg);
> +		if (ret < 0)
> +			return dev_err_probe(dev, ret, "Failed to get vref\n");
> +
> +		st->vref = ret / uV_PER_mV;
> +	}
> +
> +	ret = devm_add_action_or_reset(dev, ad5754_power_off, st);
> +	if (ret)
> +		return ret;
> +
> +	indio_dev->name = st->chip_info->name;
> +	indio_dev->modes = INDIO_DIRECT_MODE;
> +	indio_dev->info = &ad5754_info;
> +	indio_dev->channels = st->chip_info->channels;
> +	indio_dev->num_channels = st->chip_info->num_channels;
> +
> +	ret = ad5754_enable_channels(st);
> +	if (ret)
> +		return ret;
> +
> +	return devm_iio_device_register(dev, indio_dev);
> +}
diff mbox series

Patch

diff --git a/MAINTAINERS b/MAINTAINERS
index 4e5d1d737cfb..6fa48820c969 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1091,6 +1091,14 @@  T:	git git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net.git
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next.git
 F:	drivers/net/amt.c
 
+ANALOG DEVICES INC AD5754 DRIVER
+M:	Ciprian Regus <ciprian.regus@analog.com>
+L:	linux-iio@vger.kernel.org
+S:	Supported
+W:	https://ez.analog.com/linux-software-drivers
+F:	Documentation/devicetree/bindings/iio/dac/adi,ad5754.yaml
+F:	drivers/iio/dac/ad5754.c
+
 ANALOG DEVICES INC AD7192 DRIVER
 M:	Alexandru Tachici <alexandru.tachici@analog.com>
 L:	linux-iio@vger.kernel.org
diff --git a/drivers/iio/dac/Kconfig b/drivers/iio/dac/Kconfig
index 80521bd28d0f..561bfbedeecb 100644
--- a/drivers/iio/dac/Kconfig
+++ b/drivers/iio/dac/Kconfig
@@ -170,6 +170,18 @@  config AD5696_I2C
 	  To compile this driver as a module, choose M here: the module will be
 	  called ad5696.
 
+config AD5754
+	tristate "Analog Devices AD5754 and similar DACs"
+	depends on SPI
+	select REGMAP_SPI
+	help
+	  Say yes here to build support for Analog Devices AD5752, AD5732,
+	  AD5722, AD5754, AD5734, AD5724, AD5752R, AD5732R, AD5722R, AD5754R,
+	  AD5734R, AD5724R dual/quad channel Digital to Analog Converters.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ad5754.
+
 config AD5755
 	tristate "Analog Devices AD5755/AD5755-1/AD5757/AD5735/AD5737 DAC driver"
 	depends on SPI_MASTER
diff --git a/drivers/iio/dac/Makefile b/drivers/iio/dac/Makefile
index ec3e42713f00..d6c18deed1f7 100644
--- a/drivers/iio/dac/Makefile
+++ b/drivers/iio/dac/Makefile
@@ -16,6 +16,7 @@  obj-$(CONFIG_AD5449) += ad5449.o
 obj-$(CONFIG_AD5592R_BASE) += ad5592r-base.o
 obj-$(CONFIG_AD5592R) += ad5592r.o
 obj-$(CONFIG_AD5593R) += ad5593r.o
+obj-$(CONFIG_AD5754) += ad5754.o
 obj-$(CONFIG_AD5755) += ad5755.o
 obj-$(CONFIG_AD5755) += ad5758.o
 obj-$(CONFIG_AD5761) += ad5761.o
diff --git a/drivers/iio/dac/ad5754.c b/drivers/iio/dac/ad5754.c
new file mode 100644
index 000000000000..ee52fcbef3a2
--- /dev/null
+++ b/drivers/iio/dac/ad5754.c
@@ -0,0 +1,647 @@ 
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2022 Analog Devices, Inc.
+ * Author: Ciprian Regus <ciprian.regus@analog.com>
+ */
+
+#include <linux/bitfield.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/gpio/driver.h>
+#include <linux/iio/iio.h>
+#include <linux/kernel.h>
+#include <linux/linear_range.h>
+#include <linux/mod_devicetable.h>
+#include <linux/property.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+#include <linux/spi/spi.h>
+
+#include <asm/unaligned.h>
+
+#define AD5754_INT_VREF_mV			2500
+#define AD5754_FRAME_SIZE			3
+#define AD5754_MAX_CHANNELS			4
+#define AD5754_MAX_RESOLUTION			16
+#define uV_PER_mV				1000
+
+#define AD5754_DATA_MASK(_lsb)		GENMASK(15, _lsb)
+#define AD5754_RANGE_MASK		GENMASK(2, 0)
+
+#define AD5754_REG_RD			BIT(7)
+
+#define AD5754_CLEAR_FUNC		0x4
+#define AD5754_LOAD_FUNC		0x5
+#define AD5754_NOOP_FUNC		0x0
+
+#define AD5754_PU_ADDR			0x0
+#define AD5754_PU_MASK			GENMASK(3, 0)
+#define AD5754_PU_CH(x)		BIT(x)
+#define AD5754_INT_REF_MASK		BIT(4)
+
+#define AD5754_DAC_REG			0x0
+#define AD5754_RANGE_REG		0x1
+#define AD5754_PWR_REG			0x2
+#define AD5754_CTRL_REG			0x3
+
+#define AD5754_REG_ADDR(reg, addr)	(((reg) << 3) | (addr))
+
+#define AD5754_CHANNEL(_channel)					\
+	{								\
+		.type = IIO_VOLTAGE,					\
+		.indexed = 1,						\
+		.channel = _channel,					\
+		.output = 1,						\
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW)    |	\
+				      BIT(IIO_CHAN_INFO_SCALE)  |	\
+				      BIT(IIO_CHAN_INFO_OFFSET)		\
+	}
+
+struct ad5754_span_tbl {
+	int min;
+	int max;
+};
+
+static const struct ad5754_span_tbl ad5754_range[] = {
+	{0, 5000000},
+	{0, 10000000},
+	{0, 10800000},
+	{-5000000, 5000000},
+	{-10000000, 10000000},
+	{-10800000, 10800000},
+};
+
+enum AD5754_TYPE {
+	AD5722,
+	AD5732,
+	AD5752,
+	AD5724,
+	AD5734,
+	AD5754,
+	AD5722R,
+	AD5732R,
+	AD5752R,
+	AD5724R,
+	AD5734R,
+	AD5754R,
+};
+
+struct ad5754_chip_info {
+	const char *name;
+	u32 resolution;
+	bool internal_vref;
+	const u32 data_mask;
+	const struct iio_chan_spec *channels;
+	u32 num_channels;
+};
+
+static const struct iio_chan_spec ad5754_2_channels[2] = {
+		AD5754_CHANNEL(0),
+		AD5754_CHANNEL(1),
+};
+
+static const struct iio_chan_spec ad5754_4_channels[4] = {
+		AD5754_CHANNEL(0),
+		AD5754_CHANNEL(1),
+		AD5754_CHANNEL(2),
+		AD5754_CHANNEL(3),
+};
+
+static const struct ad5754_chip_info ad5754_chip_info_data[] = {
+	[AD5722] = {
+		.name = "ad5722",
+		.resolution = 12,
+		.data_mask = AD5754_DATA_MASK(4),
+		.internal_vref = false,
+		.num_channels = 2,
+		.channels = ad5754_2_channels,
+	},
+	[AD5732] = {
+		.name = "ad5732",
+		.resolution = 14,
+		.data_mask = AD5754_DATA_MASK(2),
+		.internal_vref = false,
+		.num_channels = 2,
+		.channels = ad5754_2_channels,
+	},
+	[AD5752] = {
+		.name = "ad5752",
+		.resolution = 16,
+		.data_mask = AD5754_DATA_MASK(0),
+		.internal_vref = false,
+		.num_channels = 2,
+		.channels = ad5754_2_channels,
+	},
+	[AD5724] = {
+		.name = "ad5724",
+		.resolution = 12,
+		.data_mask = AD5754_DATA_MASK(4),
+		.internal_vref = false,
+		.num_channels = 4,
+		.channels = ad5754_4_channels,
+	},
+	[AD5734] = {
+		.name = "ad5734",
+		.resolution = 14,
+		.data_mask = AD5754_DATA_MASK(2),
+		.internal_vref = false,
+		.num_channels = 4,
+		.channels = ad5754_4_channels,
+	},
+	[AD5754] = {
+		.name = "ad5754",
+		.resolution = 16,
+		.data_mask = AD5754_DATA_MASK(0),
+		.internal_vref = false,
+		.num_channels = 4,
+		.channels = ad5754_4_channels,
+	},
+	[AD5722R] = {
+		.name = "ad5722r",
+		.resolution = 12,
+		.data_mask = AD5754_DATA_MASK(4),
+		.internal_vref = true,
+		.num_channels = 2,
+		.channels = ad5754_2_channels,
+	},
+	[AD5732R] = {
+		.name = "ad5732r",
+		.resolution = 14,
+		.data_mask = AD5754_DATA_MASK(2),
+		.internal_vref = true,
+		.num_channels = 2,
+		.channels = ad5754_2_channels,
+	},
+	[AD5752R] = {
+		.name = "ad5752r",
+		.resolution = 16,
+		.data_mask = AD5754_DATA_MASK(0),
+		.internal_vref = true,
+		.num_channels = 2,
+		.channels = ad5754_2_channels,
+	},
+	[AD5724R] = {
+		.name = "ad5724r",
+		.resolution = 12,
+		.data_mask = AD5754_DATA_MASK(4),
+		.internal_vref = true,
+		.num_channels = 4,
+		.channels = ad5754_4_channels,
+	},
+	[AD5734R] = {
+		.name = "ad5734r",
+		.resolution = 14,
+		.data_mask = AD5754_DATA_MASK(2),
+		.internal_vref = true,
+		.num_channels = 4,
+		.channels = ad5754_4_channels,
+	},
+	[AD5754R] = {
+		.name = "ad5754r",
+		.resolution = 16,
+		.data_mask = AD5754_DATA_MASK(0),
+		.internal_vref = true,
+		.num_channels = 4,
+		.channels = ad5754_4_channels,
+	},
+};
+
+struct ad5754_state {
+	struct regmap *regmap;
+	struct spi_device *spi;
+
+	const struct ad5754_chip_info *chip_info;
+
+	struct gpio_desc *clr_gpio;
+	struct regulator *vref_reg;
+	u32 range_idx[AD5754_MAX_CHANNELS];
+	int offset[AD5754_MAX_CHANNELS];
+	u32 data_mask;
+	u32 vref;
+
+	/*
+	 * DMA (thus cache coherency maintenance) may require the
+	 * transfer buffers to live in their own cache lines.
+	 */
+	u8 buff[AD5754_FRAME_SIZE] __aligned(IIO_DMA_MINALIGN);
+};
+
+/*
+ * The channel addresses for 2 channel chip variants are not sequential:
+ *      A2 A1 A0 Channel
+ *	0  0  0   DAC A
+ *	0  1  0   DAC B
+ *
+ * This is not the case for 4 channel chips:
+ *	A2 A1 A0 Channel
+ *	0  0  0   DAC A
+ *	0  0  1   DAC B
+ *	0  1  0   DAC C
+ *	0  1  1   DAC D
+ */
+static unsigned int ad5754_real_ch(struct ad5754_state *st,
+				   u32 channel,
+				   u32 *real_channel)
+{
+	switch (st->chip_info->num_channels) {
+	case 2:
+		if (channel == 0)
+			*real_channel = 0;
+		else
+			*real_channel = 2;
+		break;
+	case 4:
+		*real_channel = channel;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int ad5754_get_output_range(struct ad5754_state *st,
+				   struct fwnode_handle *channel_node,
+				   u32 ch_idx)
+{
+	u32 range[2];
+	int min, max;
+	int ret;
+	u32 i;
+
+	ret = fwnode_property_read_u32_array(channel_node,
+					     "adi,output-range-microvolt",
+					     range, 2);
+	if (ret)
+		return ret;
+
+	min = range[0];
+	max = range[1];
+
+	for (i = 0; i < ARRAY_SIZE(ad5754_range); i++) {
+		if (ad5754_range[i].min != min || ad5754_range[i].max != max)
+			continue;
+
+		st->range_idx[ch_idx] = i;
+		if (min < 0)
+			st->offset[ch_idx] = -BIT(st->chip_info->resolution - 1);
+
+		return 0;
+	}
+
+	return -EINVAL;
+}
+
+static int ad5754_reg_write(void *context, unsigned int reg, unsigned int val)
+{
+	struct ad5754_state *st = context;
+	struct spi_transfer xfer = {
+		.tx_buf = st->buff,
+		.len = 3,
+	};
+
+	st->buff[0] = reg;
+	put_unaligned_be16(val, &st->buff[1]);
+
+	return spi_sync_transfer(st->spi, &xfer, 1);
+};
+
+static int ad5754_reg_read(void *context, unsigned int reg, unsigned int *val)
+{
+	struct ad5754_state *st = context;
+	struct spi_transfer xfer[] = {
+		{
+			.tx_buf = st->buff,
+			.len = AD5754_FRAME_SIZE,
+		},
+	};
+	int ret;
+
+	st->buff[0] = AD5754_REG_RD | reg;
+	ret = spi_sync_transfer(st->spi, xfer, 1);
+	if (ret)
+		return ret;
+
+	xfer->rx_buf = st->buff;
+	st->buff[0] = AD5754_REG_ADDR(AD5754_CTRL_REG, AD5754_NOOP_FUNC);
+	st->buff[1] = 0;
+	st->buff[2] = 0;
+	ret = spi_sync_transfer(st->spi, xfer, 1);
+	if (ret)
+		return ret;
+
+	*val = get_unaligned_be16(&st->buff[1]);
+
+	return 0;
+};
+
+static const struct regmap_config ad5754_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 16,
+	.reg_write = ad5754_reg_write,
+	.reg_read = ad5754_reg_read,
+	.max_register = 0x23,
+};
+
+static int ad5754_set_dac_code(struct ad5754_state *st, u32 channel, u32 code)
+{
+	u32 sub_lsb = AD5754_MAX_RESOLUTION - st->chip_info->resolution;
+	struct reg_sequence xfer_seq[2] = {
+		{ AD5754_REG_ADDR(AD5754_DAC_REG, channel), code << sub_lsb },
+		{ AD5754_REG_ADDR(AD5754_CTRL_REG, AD5754_LOAD_FUNC), 0 },
+	};
+
+	return regmap_multi_reg_write(st->regmap, xfer_seq, 2);
+}
+
+static int ad5754_enable_channels(struct ad5754_state *st)
+{
+	struct fwnode_handle *channel_node;
+	u32 real_channel;
+	u32 power_reg;
+	u32 index;
+	int ret;
+
+	device_for_each_child_node(&st->spi->dev, channel_node) {
+		ret = fwnode_property_read_u32(channel_node, "reg", &index);
+		if (ret) {
+			dev_err(&st->spi->dev, "Failed to read channel reg: %d\n", ret);
+			goto free_node;
+		}
+		if (index >= st->chip_info->num_channels) {
+			dev_err(&st->spi->dev, "Channel index %u is too large\n", index);
+			goto free_node;
+		}
+
+		ret = ad5754_real_ch(st, index, &real_channel);
+		if (ret)
+			goto free_node;
+
+		ret = ad5754_get_output_range(st, channel_node, index);
+		if (ret)
+			goto free_node;
+
+		ret = regmap_write_bits(st->regmap,
+					AD5754_REG_ADDR(AD5754_RANGE_REG, real_channel),
+					AD5754_RANGE_MASK, st->range_idx[index]);
+		if (ret)
+			goto free_node;
+
+		ret = regmap_read(st->regmap,
+				  AD5754_REG_ADDR(AD5754_PWR_REG, AD5754_PU_ADDR),
+				  &power_reg);
+		if  (ret)
+			goto free_node;
+
+		ret = regmap_update_bits(st->regmap,
+					 AD5754_REG_ADDR(AD5754_PWR_REG, AD5754_PU_ADDR),
+					 AD5754_PU_MASK, AD5754_PU_CH(real_channel) |
+					 (power_reg & AD5754_PU_MASK));
+		if (ret)
+			goto free_node;
+
+		/* Channel power up delay */
+		fsleep(10);
+	}
+
+	return 0;
+
+free_node:
+	fwnode_handle_put(channel_node);
+
+	return ret;
+}
+
+static int ad5754_write_raw(struct iio_dev *indio_dev,
+			    struct iio_chan_spec const *chan,
+			    int val, int val2, long info)
+{
+	struct ad5754_state *st = iio_priv(indio_dev);
+	u32 real_channel;
+	int ret;
+
+	switch (info) {
+	case IIO_CHAN_INFO_RAW:
+		if (val < 0 || val >= BIT(st->chip_info->resolution)) {
+			dev_err(&st->spi->dev, "Invalid DAC code %d\n", val);
+			return -EINVAL;
+		}
+		ret = ad5754_real_ch(st, chan->channel, &real_channel);
+		if (ret)
+			return ret;
+
+		return ad5754_set_dac_code(st, real_channel, val);
+	default:
+		return -EINVAL;
+	}
+}
+
+static int ad5754_read_raw(struct iio_dev *indio_dev,
+			   struct iio_chan_spec const *chan,
+			   int *val, int *val2, long info)
+{
+	struct ad5754_state *st = iio_priv(indio_dev);
+	const struct ad5754_span_tbl *range;
+	u32 real_channel;
+	int ret;
+
+	ret = ad5754_real_ch(st, chan->channel, &real_channel);
+	if (ret)
+		return ret;
+
+	switch (info) {
+	case IIO_CHAN_INFO_RAW:
+		ret = regmap_read(st->regmap, real_channel, val);
+		if (ret)
+			return ret;
+
+		*val >>= AD5754_MAX_RESOLUTION - st->chip_info->resolution;
+
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_SCALE:
+		range = &ad5754_range[st->range_idx[chan->channel]];
+		*val = (range->max - range->min) / uV_PER_mV;
+		*val2 = st->chip_info->resolution;
+
+		return IIO_VAL_FRACTIONAL_LOG2;
+	case IIO_CHAN_INFO_OFFSET:
+		*val = st->offset[chan->channel];
+
+		return IIO_VAL_INT;
+	default:
+		return -EINVAL;
+	}
+}
+
+static void ad5754_power_off(void *state)
+{
+	struct ad5754_state *st = state;
+
+	/* Power off the output for all channels */
+	regmap_update_bits(st->regmap,
+			   AD5754_REG_ADDR(AD5754_PWR_REG, AD5754_PU_ADDR),
+			   AD5754_PU_MASK, FIELD_PREP(AD5754_PU_MASK, 0));
+
+	if (!st->chip_info->internal_vref)
+		regulator_disable(st->vref_reg);
+	else
+		regmap_update_bits(st->regmap,
+				   AD5754_REG_ADDR(AD5754_PWR_REG, AD5754_PU_ADDR),
+				   AD5754_INT_REF_MASK,
+				   FIELD_PREP(AD5754_INT_REF_MASK, 0));
+}
+
+static const struct iio_info ad5754_info = {
+	.read_raw = &ad5754_read_raw,
+	.write_raw = &ad5754_write_raw,
+};
+
+static int ad5754_probe(struct spi_device *spi)
+{
+	struct device *dev = &spi->dev;
+	struct iio_dev *indio_dev;
+	struct ad5754_state *st;
+	int ret;
+
+	indio_dev = devm_iio_device_alloc(dev, sizeof(*st));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	st = iio_priv(indio_dev);
+
+	st->spi = spi;
+	st->chip_info = device_get_match_data(dev);
+	if (!st->chip_info)
+		st->chip_info = (void *)spi_get_device_id(spi)->driver_data;
+
+	st->regmap = devm_regmap_init(dev, NULL, st, &ad5754_regmap_config);
+	if (IS_ERR(st->regmap))
+		return dev_err_probe(dev, PTR_ERR(st->regmap),
+				     "Regmap init error\n");
+
+	st->clr_gpio = devm_gpiod_get_optional(dev, "clr", GPIOD_OUT_LOW);
+	if (IS_ERR(st->clr_gpio))
+		return PTR_ERR(st->clr_gpio);
+
+	/* Clear the DAC code registers */
+	ret = regmap_write(st->regmap,
+			   AD5754_REG_ADDR(AD5754_CTRL_REG, AD5754_CLEAR_FUNC),
+			   0);
+	if (ret)
+		return ret;
+
+	st->vref_reg = devm_regulator_get_optional(dev, "vref");
+	if (IS_ERR(st->vref_reg)) {
+		if (!st->chip_info->internal_vref)
+			return dev_err_probe(dev, PTR_ERR(st->vref_reg),
+					     "Failed to get the vref regulator\n");
+
+		st->vref = AD5754_INT_VREF_mV;
+		ret = regmap_update_bits(st->regmap,
+					 AD5754_REG_ADDR(AD5754_PWR_REG, AD5754_PU_ADDR),
+					 AD5754_INT_REF_MASK,
+					 FIELD_PREP(AD5754_INT_REF_MASK, 1));
+		if (ret)
+			return ret;
+	} else {
+		ret = regulator_enable(st->vref_reg);
+		if (ret)
+			return dev_err_probe(dev, ret,
+					     "Failed to enable the vref regulator\n");
+
+		ret = regulator_get_voltage(st->vref_reg);
+		if (ret < 0)
+			return dev_err_probe(dev, ret, "Failed to get vref\n");
+
+		st->vref = ret / uV_PER_mV;
+	}
+
+	ret = devm_add_action_or_reset(dev, ad5754_power_off, st);
+	if (ret)
+		return ret;
+
+	indio_dev->name = st->chip_info->name;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->info = &ad5754_info;
+	indio_dev->channels = st->chip_info->channels;
+	indio_dev->num_channels = st->chip_info->num_channels;
+
+	ret = ad5754_enable_channels(st);
+	if (ret)
+		return ret;
+
+	return devm_iio_device_register(dev, indio_dev);
+}
+
+static const struct spi_device_id ad5754_id[] = {
+	{ "ad5722", (kernel_ulong_t)&ad5754_chip_info_data[AD5722], },
+	{ "ad5732", (kernel_ulong_t)&ad5754_chip_info_data[AD5732], },
+	{ "ad5752", (kernel_ulong_t)&ad5754_chip_info_data[AD5752], },
+	{ "ad5724", (kernel_ulong_t)&ad5754_chip_info_data[AD5724], },
+	{ "ad5734", (kernel_ulong_t)&ad5754_chip_info_data[AD5734], },
+	{ "ad5754", (kernel_ulong_t)&ad5754_chip_info_data[AD5754], },
+	{ "ad5722r", (kernel_ulong_t)&ad5754_chip_info_data[AD5722R], },
+	{ "ad5732r", (kernel_ulong_t)&ad5754_chip_info_data[AD5732R], },
+	{ "ad5752r", (kernel_ulong_t)&ad5754_chip_info_data[AD5752R], },
+	{ "ad5724r", (kernel_ulong_t)&ad5754_chip_info_data[AD5724R], },
+	{ "ad5734r", (kernel_ulong_t)&ad5754_chip_info_data[AD5734R], },
+	{ "ad5754r", (kernel_ulong_t)&ad5754_chip_info_data[AD5754R], },
+	{}
+};
+
+static const struct of_device_id ad5754_dt_id[] = {
+	{
+		.compatible = "adi,ad5722",
+		.data = &ad5754_chip_info_data[AD5722],
+	}, {
+		.compatible = "adi,ad5732",
+		.data = &ad5754_chip_info_data[AD5732],
+	}, {
+		.compatible = "adi,ad5752",
+		.data = &ad5754_chip_info_data[AD5752],
+	}, {
+		.compatible = "adi,ad5724",
+		.data = &ad5754_chip_info_data[AD5724],
+	}, {
+		.compatible = "adi,ad5734",
+		.data = &ad5754_chip_info_data[AD5734],
+	}, {
+		.compatible = "adi,ad5754",
+		.data = &ad5754_chip_info_data[AD5754],
+	}, {
+		.compatible = "adi,ad5722r",
+		.data = &ad5754_chip_info_data[AD5722R],
+	}, {
+		.compatible = "adi,ad5732r",
+		.data = &ad5754_chip_info_data[AD5732R],
+	}, {
+		.compatible = "adi,ad5752r",
+		.data = &ad5754_chip_info_data[AD5752R],
+	}, {
+		.compatible = "adi,ad5724r",
+		.data = &ad5754_chip_info_data[AD5724R],
+	}, {
+		.compatible = "adi,ad5734r",
+		.data = &ad5754_chip_info_data[AD5734R],
+	}, {
+		.compatible = "adi,ad5754r",
+		.data = &ad5754_chip_info_data[AD5754R],
+	},
+	{}
+};
+MODULE_DEVICE_TABLE(of, ad5754_dt_id);
+
+static struct spi_driver ad5754_driver = {
+	.driver = {
+		.name = "ad5754",
+		.of_match_table = ad5754_dt_id,
+	},
+	.probe = ad5754_probe,
+	.id_table = ad5754_id,
+};
+
+module_spi_driver(ad5754_driver);
+
+MODULE_AUTHOR("Ciprian Regus <ciprian.regus@analog.com>");
+MODULE_DESCRIPTION("Analog Devices AD5754 DAC");
+MODULE_LICENSE("GPL");