| Message ID | 20221121123542.1322367-2-gerald.loacker@wolfvision.net (mailing list archive) |
|---|---|
| State | Changes Requested |
| Headers | show |
| Series | add ti tmag5273 driver | expand |
On 21/11/2022 13:35, Gerald Loacker wrote: > Add bindings for TI TMAG5273. > > Signed-off-by: Gerald Loacker <gerald.loacker@wolfvision.net> > --- > Changes in v2: > - Removed nodename > - Changed angle-enable to angle-measurement and used strings > - Added interrupts > - Removed vcc-supply from required properties > - Changed i2c-0 to i2c in examples > .../iio/magnetometer/ti,tmag5273.yaml | 75 +++++++++++++++++++ > MAINTAINERS | 6 ++ > 2 files changed, 81 insertions(+) > create mode 100644 Documentation/devicetree/bindings/iio/magnetometer/ti,tmag5273.yaml > > diff --git a/Documentation/devicetree/bindings/iio/magnetometer/ti,tmag5273.yaml b/Documentation/devicetree/bindings/iio/magnetometer/ti,tmag5273.yaml > new file mode 100644 > index 000000000000..b2ecd7054a34 > --- /dev/null > +++ b/Documentation/devicetree/bindings/iio/magnetometer/ti,tmag5273.yaml > @@ -0,0 +1,75 @@ > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/iio/magnetometer/ti,tmag5273.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: TI TMAG5273 Low-Power Linear 3D Hall-Effect Sensor > + > +maintainers: > + - Gerald Loacker <gerald.loacker@wolfvision.net> > + > +description: > + The TI TMAG5273 is a low-power linear 3D Hall-effect sensor. This device > + integrates three independent Hall-effect sensors in the X, Y, and Z axes. > + The device has an integrated temperature sensor available. The TMAG5273 > + can be configured through the I2C interface to enable any combination of > + magnetic axes and temperature measurements. An integrated angle calculation > + engine (CORDIC) provides full 360° angular position information for both > + on-axis and off-axis angle measurement topologies. The angle calculation is > + performed using two user-selected magnetic axes. > + > +properties: > + compatible: > + const: ti,tmag5273 > + > + reg: > + maxItems: 1 > + > + "#io-channel-cells": > + const: 1 > + > + ti,angle-measurement: > + $ref: /schemas/types.yaml#/definitions/string > + description: > + Enables angle measurement in the selected plane. > + If not specified, "x-y" will be anables as default. > + enum: > + - "off" > + - "x-y" > + - "y-z" > + - "x-z" Drop quotes from all these. With this: Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Best regards, Krzysztof
diff --git a/Documentation/devicetree/bindings/iio/magnetometer/ti,tmag5273.yaml b/Documentation/devicetree/bindings/iio/magnetometer/ti,tmag5273.yaml new file mode 100644 index 000000000000..b2ecd7054a34 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/magnetometer/ti,tmag5273.yaml @@ -0,0 +1,75 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/magnetometer/ti,tmag5273.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI TMAG5273 Low-Power Linear 3D Hall-Effect Sensor + +maintainers: + - Gerald Loacker <gerald.loacker@wolfvision.net> + +description: + The TI TMAG5273 is a low-power linear 3D Hall-effect sensor. This device + integrates three independent Hall-effect sensors in the X, Y, and Z axes. + The device has an integrated temperature sensor available. The TMAG5273 + can be configured through the I2C interface to enable any combination of + magnetic axes and temperature measurements. An integrated angle calculation + engine (CORDIC) provides full 360° angular position information for both + on-axis and off-axis angle measurement topologies. The angle calculation is + performed using two user-selected magnetic axes. + +properties: + compatible: + const: ti,tmag5273 + + reg: + maxItems: 1 + + "#io-channel-cells": + const: 1 + + ti,angle-measurement: + $ref: /schemas/types.yaml#/definitions/string + description: + Enables angle measurement in the selected plane. + If not specified, "x-y" will be anables as default. + enum: + - "off" + - "x-y" + - "y-z" + - "x-z" + + vcc-supply: + description: + A regulator providing 1.7 V to 3.6 V supply voltage on the VCC pin, + typically 3.3 V. + + interrupts: + description: + The low active interrupt can be configured to be fixed width or latched. + Interrupt events can be configured to be generated from magnetic + thresholds or when a conversion is completed. + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + magnetometer@35 { + compatible = "ti,tmag5273"; + reg = <0x35>; + #io-channel-cells = <1>; + ti,angle-measurement = "x-z"; + vcc-supply = <&vcc3v3>; + }; + }; +... diff --git a/MAINTAINERS b/MAINTAINERS index cf0f18502372..ea7acec52f8b 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -20613,6 +20613,12 @@ L: alsa-devel@alsa-project.org (moderated for non-subscribers) S: Odd Fixes F: sound/soc/codecs/tas571x* +TI TMAG5273 MAGNETOMETER DRIVER +M: Gerald Loacker <gerald.loacker@wolfvision.net> +L: linux-iio@vger.kernel.org +S: Maintained +F: Documentation/devicetree/bindings/iio/magnetometer/ti,tmag5273.yaml + TI TRF7970A NFC DRIVER M: Mark Greer <mgreer@animalcreek.com> L: linux-wireless@vger.kernel.org
Add bindings for TI TMAG5273. Signed-off-by: Gerald Loacker <gerald.loacker@wolfvision.net> --- Changes in v2: - Removed nodename - Changed angle-enable to angle-measurement and used strings - Added interrupts - Removed vcc-supply from required properties - Changed i2c-0 to i2c in examples .../iio/magnetometer/ti,tmag5273.yaml | 75 +++++++++++++++++++ MAINTAINERS | 6 ++ 2 files changed, 81 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/magnetometer/ti,tmag5273.yaml