| Message ID | 20221216190945.902754-1-marijn.suijten@somainline.org (mailing list archive) |
|---|---|
| State | Accepted |
| Headers | show |
| Series | thermal: qcom-spmi-adc5: Suppress probe-deferral error message | expand |
Whoops, that tile must of course have started with:
iio: adc: qcom-spmi-adc5:
instead of blindly copying the suffix from the thermal monitor patch
(this driver is not a thermal monitor...). I'll send a v2 if there are
no other objections, unless this can be fixed up when the patch is
applied.
On 2022-12-16 20:09:45, Marijn Suijten wrote:
> Much like 807efb7102e8 ("thermal: qcom-spmi-adc-tm5: suppress
> probe-deferral error message") the ADC5 driver also spams a similar
> probe-deferral error on startup when a channel is not yet available:
>
> [ 0.343136] qcom-spmi-adc-tm5 1c40000.spmi:pmic@0:adc-tm@3500: get dt data failed: -517
>
> Suppress it by using dev_err_probe instead, which also takes care of
> storing the message as reason for deferring.
>
> Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
> ---
> drivers/iio/adc/qcom-spmi-adc5.c | 6 ++----
> 1 file changed, 2 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/iio/adc/qcom-spmi-adc5.c b/drivers/iio/adc/qcom-spmi-adc5.c
> index 821fee60a765..69cc36004b5a 100644
> --- a/drivers/iio/adc/qcom-spmi-adc5.c
> +++ b/drivers/iio/adc/qcom-spmi-adc5.c
> @@ -894,10 +894,8 @@ static int adc5_probe(struct platform_device *pdev)
> mutex_init(&adc->lock);
>
> ret = adc5_get_fw_data(adc);
> - if (ret) {
> - dev_err(dev, "adc get dt data failed\n");
> - return ret;
> - }
> + if (ret)
> + return dev_err_probe(dev, ret, "adc get dt data failed\n");
>
> irq_eoc = platform_get_irq(pdev, 0);
> if (irq_eoc < 0) {
> --
> 2.39.0
>
Apologies for the clumsiness.
- Marijn
On 16/12/2022 21:09, Marijn Suijten wrote: > Much like 807efb7102e8 ("thermal: qcom-spmi-adc-tm5: suppress > probe-deferral error message") the ADC5 driver also spams a similar > probe-deferral error on startup when a channel is not yet available: > > [ 0.343136] qcom-spmi-adc-tm5 1c40000.spmi:pmic@0:adc-tm@3500: get dt data failed: -517 > > Suppress it by using dev_err_probe instead, which also takes care of > storing the message as reason for deferring. > > Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> > --- > drivers/iio/adc/qcom-spmi-adc5.c | 6 ++---- > 1 file changed, 2 insertions(+), 4 deletions(-) With the prefix fixed: Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
On Fri, Dec 16 2022 at 08:09:45 PM +01:00:00, Marijn Suijten <marijn.suijten@somainline.org> wrote: > Much like 807efb7102e8 ("thermal: qcom-spmi-adc-tm5: suppress > probe-deferral error message") the ADC5 driver also spams a similar > probe-deferral error on startup when a channel is not yet available: > > [ 0.343136] qcom-spmi-adc-tm5 1c40000.spmi:pmic@0:adc-tm@3500: > get dt data failed: -517 > > Suppress it by using dev_err_probe instead, which also takes care of > storing the message as reason for deferring. > > Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> > --- > drivers/iio/adc/qcom-spmi-adc5.c | 6 ++---- > 1 file changed, 2 insertions(+), 4 deletions(-) > > diff --git a/drivers/iio/adc/qcom-spmi-adc5.c > b/drivers/iio/adc/qcom-spmi-adc5.c > index 821fee60a765..69cc36004b5a 100644 > --- a/drivers/iio/adc/qcom-spmi-adc5.c > +++ b/drivers/iio/adc/qcom-spmi-adc5.c > @@ -894,10 +894,8 @@ static int adc5_probe(struct platform_device > *pdev) > mutex_init(&adc->lock); > > ret = adc5_get_fw_data(adc); > - if (ret) { > - dev_err(dev, "adc get dt data failed\n"); > - return ret; > - } > + if (ret) > + return dev_err_probe(dev, ret, "adc get dt data failed\n"); > Reviewed-by: Martin Botka <martin.botka@somainline.org> -Martin > irq_eoc = platform_get_irq(pdev, 0); > if (irq_eoc < 0) { > -- > 2.39.0 >
On Sat, 17 Dec 2022 00:42:12 +0100 Marijn Suijten <marijn.suijten@somainline.org> wrote: > Whoops, that tile must of course have started with: > > iio: adc: qcom-spmi-adc5: > > instead of blindly copying the suffix from the thermal monitor patch > (this driver is not a thermal monitor...). I'll send a v2 if there are > no other objections, unless this can be fixed up when the patch is > applied. Fixed up whilst applying. Applied to the togreg branch of iio.git, but only pushed out as testing for now as I want to rebase the branch on rc1 once available. Jonathan > > On 2022-12-16 20:09:45, Marijn Suijten wrote: > > Much like 807efb7102e8 ("thermal: qcom-spmi-adc-tm5: suppress > > probe-deferral error message") the ADC5 driver also spams a similar > > probe-deferral error on startup when a channel is not yet available: > > > > [ 0.343136] qcom-spmi-adc-tm5 1c40000.spmi:pmic@0:adc-tm@3500: get dt data failed: -517 > > > > Suppress it by using dev_err_probe instead, which also takes care of > > storing the message as reason for deferring. > > > > Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> > > --- > > drivers/iio/adc/qcom-spmi-adc5.c | 6 ++---- > > 1 file changed, 2 insertions(+), 4 deletions(-) > > > > diff --git a/drivers/iio/adc/qcom-spmi-adc5.c b/drivers/iio/adc/qcom-spmi-adc5.c > > index 821fee60a765..69cc36004b5a 100644 > > --- a/drivers/iio/adc/qcom-spmi-adc5.c > > +++ b/drivers/iio/adc/qcom-spmi-adc5.c > > @@ -894,10 +894,8 @@ static int adc5_probe(struct platform_device *pdev) > > mutex_init(&adc->lock); > > > > ret = adc5_get_fw_data(adc); > > - if (ret) { > > - dev_err(dev, "adc get dt data failed\n"); > > - return ret; > > - } > > + if (ret) > > + return dev_err_probe(dev, ret, "adc get dt data failed\n"); > > > > irq_eoc = platform_get_irq(pdev, 0); > > if (irq_eoc < 0) { > > -- > > 2.39.0 > > > > Apologies for the clumsiness. > > - Marijn
diff --git a/drivers/iio/adc/qcom-spmi-adc5.c b/drivers/iio/adc/qcom-spmi-adc5.c index 821fee60a765..69cc36004b5a 100644 --- a/drivers/iio/adc/qcom-spmi-adc5.c +++ b/drivers/iio/adc/qcom-spmi-adc5.c @@ -894,10 +894,8 @@ static int adc5_probe(struct platform_device *pdev) mutex_init(&adc->lock); ret = adc5_get_fw_data(adc); - if (ret) { - dev_err(dev, "adc get dt data failed\n"); - return ret; - } + if (ret) + return dev_err_probe(dev, ret, "adc get dt data failed\n"); irq_eoc = platform_get_irq(pdev, 0); if (irq_eoc < 0) {
Much like 807efb7102e8 ("thermal: qcom-spmi-adc-tm5: suppress probe-deferral error message") the ADC5 driver also spams a similar probe-deferral error on startup when a channel is not yet available: [ 0.343136] qcom-spmi-adc-tm5 1c40000.spmi:pmic@0:adc-tm@3500: get dt data failed: -517 Suppress it by using dev_err_probe instead, which also takes care of storing the message as reason for deferring. Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> --- drivers/iio/adc/qcom-spmi-adc5.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-)