@@ -158,4 +158,14 @@ config MAX31865
This driver can also be build as a module. If so, the module
will be called max31865.
+config MCP9600
+ tristate "MCP9600 thermocouple EMF converter"
+ depends on I2C
+ help
+ If you say yes here you get support for MCP9600
+ thermocouple EMF converter connected via I2C.
+
+ This driver can also be built as a module. If so, the module
+ will be called mcp9600.
+
endmenu
@@ -10,6 +10,7 @@ obj-$(CONFIG_MAXIM_THERMOCOUPLE) += maxim_thermocouple.o
obj-$(CONFIG_MAX30208) += max30208.o
obj-$(CONFIG_MAX31856) += max31856.o
obj-$(CONFIG_MAX31865) += max31865.o
+obj-$(CONFIG_MCP9600) += mcp9600.o
obj-$(CONFIG_MLX90614) += mlx90614.o
obj-$(CONFIG_MLX90632) += mlx90632.o
obj-$(CONFIG_TMP006) += tmp006.o
new file mode 100644
@@ -0,0 +1,146 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * mcp9600.c - Support for Microchip MCP9600 thermocouple EMF converter
+ *
+ * Copyright (c) 2022 Andrew Hepp
+ * Author: <andrew.hepp@ahepp.dev>
+ */
+
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+
+#include <linux/iio/iio.h>
+
+/* MCP9600 registers */
+#define MCP9600_HOT_JUNCTION 0x0
+#define MCP9600_COLD_JUNCTION 0x2
+#define MCP9600_DEVICE_ID 0x20
+
+/* MCP9600 device id value */
+#define MCP9600_DEVICE_ID_MCP9600 0x40
+
+static const struct iio_chan_spec mcp9600_channels[] = {
+ {
+ .type = IIO_TEMP,
+ .address = MCP9600_HOT_JUNCTION,
+ .info_mask_separate =
+ BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
+ },
+ {
+ .type = IIO_TEMP,
+ .address = MCP9600_COLD_JUNCTION,
+ .channel2 = IIO_MOD_TEMP_AMBIENT,
+ .modified = 1,
+ .info_mask_separate =
+ BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
+ },
+ IIO_CHAN_SOFT_TIMESTAMP(2),
+};
+
+struct mcp9600_data {
+ struct i2c_client *client;
+ struct mutex read_lock; /* lock to prevent concurrent reads */
+};
+
+static int mcp9600_read(struct mcp9600_data *data,
+ struct iio_chan_spec const *chan, int *val)
+{
+ __be16 buf;
+ int ret;
+
+ mutex_lock(&data->read_lock);
+ ret = i2c_smbus_read_i2c_block_data(data->client, chan->address, 2,
+ (u8 *)&buf);
+ mutex_unlock(&data->read_lock);
+
+ if (ret < 0)
+ return ret;
+ *val = be16_to_cpu(buf);
+
+ return 0;
+}
+
+static int mcp9600_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan, int *val,
+ int *val2, long mask)
+{
+ struct mcp9600_data *data = iio_priv(indio_dev);
+ int ret;
+
+ switch (mask) {
+ case IIO_CHAN_INFO_RAW:
+ ret = mcp9600_read(data, chan, val);
+ if (ret)
+ return ret;
+ return IIO_VAL_INT;
+ case IIO_CHAN_INFO_SCALE:
+ *val = 62;
+ *val2 = 500000;
+ return IIO_VAL_INT_PLUS_MICRO;
+ default:
+ return -EINVAL;
+ }
+}
+
+static const struct iio_info mcp9600_info = {
+ .read_raw = mcp9600_read_raw,
+};
+
+static int mcp9600_probe(struct i2c_client *client)
+{
+ struct iio_dev *indio_dev;
+ struct mcp9600_data *data;
+ int ret;
+
+ ret = i2c_smbus_read_byte_data(client, MCP9600_DEVICE_ID);
+ if (ret < 0)
+ return ret;
+ if (ret != MCP9600_DEVICE_ID_MCP9600)
+ dev_warn(&client->dev, "Expected ID %x, got %x\n",
+ MCP9600_DEVICE_ID_MCP9600, ret);
+
+ indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
+ if (!indio_dev)
+ return -ENOMEM;
+
+ data = iio_priv(indio_dev);
+ data->client = client;
+ mutex_init(&data->read_lock);
+
+ indio_dev->info = &mcp9600_info;
+ indio_dev->name = "mcp9600";
+ indio_dev->modes = INDIO_DIRECT_MODE;
+ indio_dev->channels = mcp9600_channels;
+ indio_dev->num_channels = ARRAY_SIZE(mcp9600_channels);
+
+ return devm_iio_device_register(&client->dev, indio_dev);
+}
+
+static const struct i2c_device_id mcp9600_id[] = {
+ { "mcp9600" },
+ {}
+};
+MODULE_DEVICE_TABLE(i2c, mcp9600_id);
+
+static const struct of_device_id mcp9600_of_match[] = {
+ { .compatible = "microchip,mcp9600" },
+ {}
+};
+MODULE_DEVICE_TABLE(of, mcp9600_of_match);
+
+static struct i2c_driver mcp9600_driver = {
+ .driver = {
+ .name = "mcp9600",
+ .of_match_table = mcp9600_of_match,
+ },
+ .probe_new = mcp9600_probe,
+ .id_table = mcp9600_id
+};
+module_i2c_driver(mcp9600_driver);
+
+MODULE_AUTHOR("Andrew Hepp <andrew.hepp@ahepp.dev>");
+MODULE_DESCRIPTION("Microchip MCP9600 thermocouple EMF converter driver");
+MODULE_LICENSE("GPL");