diff mbox series

[v3,3/3] iio: light: vcnl4000: Add interrupt support for vcnl4040

Message ID 20230110134323.543123-4-marten.lindahl@axis.com (mailing list archive)
State Accepted
Headers show
Series iio: light: vcnl4000: Add vcnl4040 interrupt support | expand

Commit Message

Mårten Lindahl Jan. 10, 2023, 1:43 p.m. UTC
Add support to configure proximity sensor interrupts and threshold
limits for vcnl4040. If an interrupt is detected an event will be
pushed to the event interface.

Signed-off-by: Mårten Lindahl <marten.lindahl@axis.com>
---
 drivers/iio/light/vcnl4000.c | 171 +++++++++++++++++++++++++++++++++++
 1 file changed, 171 insertions(+)

Comments

andriy.shechenko@saunalahti.fi Jan. 15, 2023, 5:38 p.m. UTC | #1
Tue, Jan 10, 2023 at 02:43:23PM +0100, Mårten Lindahl kirjoitti:
> Add support to configure proximity sensor interrupts and threshold
> limits for vcnl4040. If an interrupt is detected an event will be
> pushed to the event interface.

...

> +	ret = i2c_smbus_read_word_data(data->client, VCNL4200_PS_CONF1);
> +	if (ret < 0)
> +		goto out;
> +
> +	val = (u16)ret;

Why do you need casting?
Jonathan Cameron Jan. 16, 2023, 5:32 p.m. UTC | #2
On Sun, 15 Jan 2023 19:38:03 +0200
andriy.shechenko@saunalahti.fi wrote:

> Tue, Jan 10, 2023 at 02:43:23PM +0100, Mårten Lindahl kirjoitti:
> > Add support to configure proximity sensor interrupts and threshold
> > limits for vcnl4040. If an interrupt is detected an event will be
> > pushed to the event interface.  
> 
> ...
> 
> > +	ret = i2c_smbus_read_word_data(data->client, VCNL4200_PS_CONF1);
> > +	if (ret < 0)
> > +		goto out;
> > +
> > +	val = (u16)ret;  
> 
> Why do you need casting?
> 

Looks like these need a little more time.
Dropped from my tree for now.

Jonathan
Mårten Lindahl Jan. 16, 2023, 11:19 p.m. UTC | #3
On 1/15/23 18:38, andriy.shechenko@saunalahti.fi wrote:
> Tue, Jan 10, 2023 at 02:43:23PM +0100, Mårten Lindahl kirjoitti:
>> Add support to configure proximity sensor interrupts and threshold
>> limits for vcnl4040. If an interrupt is detected an event will be
>> pushed to the event interface.
> ...
>
>> +	ret = i2c_smbus_read_word_data(data->client, VCNL4200_PS_CONF1);
>> +	if (ret < 0)
>> +		goto out;
>> +
>> +	val = (u16)ret;
> Why do you need casting?

Hi Andy! I usually do this when assigning an int to a u16, since some 
compilers may complain about loosing precision.

In this case there is no such risk, so I guess it's fine to remove the 
cast. I can to that if you prefer so.

Kind regards

Mårten
Mårten Lindahl Jan. 16, 2023, 11:22 p.m. UTC | #4
On 1/16/23 18:32, Jonathan Cameron wrote:
> On Sun, 15 Jan 2023 19:38:03 +0200
> andriy.shechenko@saunalahti.fi wrote:
>
>> Tue, Jan 10, 2023 at 02:43:23PM +0100, Mårten Lindahl kirjoitti:
>>> Add support to configure proximity sensor interrupts and threshold
>>> limits for vcnl4040. If an interrupt is detected an event will be
>>> pushed to the event interface.
>> ...
>>
>>> +	ret = i2c_smbus_read_word_data(data->client, VCNL4200_PS_CONF1);
>>> +	if (ret < 0)
>>> +		goto out;
>>> +
>>> +	val = (u16)ret;
>> Why do you need casting?
>>
> Looks like these need a little more time.
> Dropped from my tree for now.
>
> Jonathan

Hi Jonathan!

No problem. I'll send v4 shortly. Thanks!

Kind regards

Mårten
diff mbox series

Patch

diff --git a/drivers/iio/light/vcnl4000.c b/drivers/iio/light/vcnl4000.c
index 792fc7f9c36e..4404974c3730 100644
--- a/drivers/iio/light/vcnl4000.c
+++ b/drivers/iio/light/vcnl4000.c
@@ -60,8 +60,11 @@ 
 
 #define VCNL4200_AL_CONF	0x00 /* Ambient light configuration */
 #define VCNL4200_PS_CONF1	0x03 /* Proximity configuration */
+#define VCNL4040_PS_THDL_LM	0x06 /* Proximity threshold low */
+#define VCNL4040_PS_THDH_LM	0x07 /* Proximity threshold high */
 #define VCNL4200_PS_DATA	0x08 /* Proximity data */
 #define VCNL4200_AL_DATA	0x09 /* Ambient light data */
+#define VCNL4040_INT_FLAGS	0x0b /* Interrupt register */
 #define VCNL4200_DEV_ID		0x0e /* Device ID, slave address and version */
 
 #define VCNL4040_DEV_ID		0x0c /* Device ID and version */
@@ -78,6 +81,9 @@ 
 #define VCNL4040_ALS_CONF_ALS_SHUTDOWN	BIT(0)
 #define VCNL4040_PS_CONF1_PS_SHUTDOWN	BIT(0)
 #define VCNL4040_PS_CONF2_PS_IT	GENMASK(3, 1) /* Proximity integration time */
+#define VCNL4040_PS_CONF2_PS_INT	GENMASK(9, 8) /* Proximity interrupt mode */
+#define VCNL4040_PS_IF_AWAY		BIT(8) /* Proximity event cross low threshold */
+#define VCNL4040_PS_IF_CLOSE		BIT(9) /* Proximity event cross high threshold */
 
 /* Bit masks for interrupt registers. */
 #define VCNL4010_INT_THR_SEL	BIT(0) /* Select threshold interrupt source */
@@ -138,6 +144,7 @@  struct vcnl4000_data {
 	enum vcnl4000_device_ids id;
 	int rev;
 	int al_scale;
+	u8 ps_int;		/* proximity interrupt mode */
 	const struct vcnl4000_chip_spec *chip_spec;
 	struct mutex vcnl4000_lock;
 	struct vcnl4200_channel vcnl4200_al;
@@ -256,6 +263,10 @@  static int vcnl4200_set_power_state(struct vcnl4000_data *data, bool on)
 {
 	int ret;
 
+	/* Do not power down if interrupts are enabled */
+	if (!on && data->ps_int)
+		return 0;
+
 	ret = vcnl4000_write_als_enable(data, on);
 	if (ret < 0)
 		return ret;
@@ -297,6 +308,7 @@  static int vcnl4200_init(struct vcnl4000_data *data)
 	dev_dbg(&data->client->dev, "device id 0x%x", id);
 
 	data->rev = (ret >> 8) & 0xf;
+	data->ps_int = 0;
 
 	data->vcnl4200_al.reg = VCNL4200_AL_DATA;
 	data->vcnl4200_ps.reg = VCNL4200_PS_DATA;
@@ -797,6 +809,64 @@  static int vcnl4010_write_event(struct iio_dev *indio_dev,
 	}
 }
 
+static int vcnl4040_read_event(struct iio_dev *indio_dev,
+			       const struct iio_chan_spec *chan,
+			       enum iio_event_type type,
+			       enum iio_event_direction dir,
+			       enum iio_event_info info,
+			       int *val, int *val2)
+{
+	int ret;
+	struct vcnl4000_data *data = iio_priv(indio_dev);
+
+	switch (dir) {
+	case IIO_EV_DIR_RISING:
+		ret = i2c_smbus_read_word_data(data->client,
+					       VCNL4040_PS_THDH_LM);
+		if (ret < 0)
+			return ret;
+		*val = ret;
+		return IIO_VAL_INT;
+	case IIO_EV_DIR_FALLING:
+		ret = i2c_smbus_read_word_data(data->client,
+					       VCNL4040_PS_THDL_LM);
+		if (ret < 0)
+			return ret;
+		*val = ret;
+		return IIO_VAL_INT;
+	default:
+		return -EINVAL;
+	}
+}
+
+static int vcnl4040_write_event(struct iio_dev *indio_dev,
+				const struct iio_chan_spec *chan,
+				enum iio_event_type type,
+				enum iio_event_direction dir,
+				enum iio_event_info info,
+				int val, int val2)
+{
+	int ret;
+	struct vcnl4000_data *data = iio_priv(indio_dev);
+
+	switch (dir) {
+	case IIO_EV_DIR_RISING:
+		ret = i2c_smbus_write_word_data(data->client,
+						VCNL4040_PS_THDH_LM, val);
+		if (ret < 0)
+			return ret;
+		return IIO_VAL_INT;
+	case IIO_EV_DIR_FALLING:
+		ret = i2c_smbus_write_word_data(data->client,
+						VCNL4040_PS_THDL_LM, val);
+		if (ret < 0)
+			return ret;
+		return IIO_VAL_INT;
+	default:
+		return -EINVAL;
+	}
+}
+
 static bool vcnl4010_is_thr_enabled(struct vcnl4000_data *data)
 {
 	int ret;
@@ -879,6 +949,88 @@  static int vcnl4010_write_event_config(struct iio_dev *indio_dev,
 	}
 }
 
+static int vcnl4040_read_event_config(struct iio_dev *indio_dev,
+				      const struct iio_chan_spec *chan,
+				      enum iio_event_type type,
+				      enum iio_event_direction dir)
+{
+	int ret;
+	struct vcnl4000_data *data = iio_priv(indio_dev);
+
+	ret = i2c_smbus_read_word_data(data->client, VCNL4200_PS_CONF1);
+	if (ret < 0)
+		return ret;
+
+	data->ps_int = FIELD_GET(VCNL4040_PS_CONF2_PS_INT, ret);
+
+	return (dir == IIO_EV_DIR_RISING) ?
+	    FIELD_GET(VCNL4040_PS_IF_AWAY, ret) :
+	    FIELD_GET(VCNL4040_PS_IF_CLOSE, ret);
+}
+
+static int vcnl4040_write_event_config(struct iio_dev *indio_dev,
+				       const struct iio_chan_spec *chan,
+				       enum iio_event_type type,
+				       enum iio_event_direction dir, int state)
+{
+	int ret;
+	u16 val;
+	struct vcnl4000_data *data = iio_priv(indio_dev);
+
+	mutex_lock(&data->vcnl4000_lock);
+
+	ret = i2c_smbus_read_word_data(data->client, VCNL4200_PS_CONF1);
+	if (ret < 0)
+		goto out;
+
+	val = (u16)ret;
+
+	if (dir == IIO_EV_DIR_RISING)
+		val = state ? (val | VCNL4040_PS_IF_AWAY) :
+		    (val & ~VCNL4040_PS_IF_AWAY);
+	else
+		val = state ? (val | VCNL4040_PS_IF_CLOSE) :
+		    (val & ~VCNL4040_PS_IF_CLOSE);
+
+	data->ps_int = FIELD_GET(VCNL4040_PS_CONF2_PS_INT, val);
+	ret = i2c_smbus_write_word_data(data->client, VCNL4200_PS_CONF1, val);
+
+out:
+	mutex_unlock(&data->vcnl4000_lock);
+	data->chip_spec->set_power_state(data, data->ps_int != 0);
+
+	return ret;
+}
+
+static irqreturn_t vcnl4040_irq_thread(int irq, void *p)
+{
+	struct iio_dev *indio_dev = p;
+	struct vcnl4000_data *data = iio_priv(indio_dev);
+	int ret;
+
+	ret = i2c_smbus_read_word_data(data->client, VCNL4040_INT_FLAGS);
+	if (ret < 0)
+		return IRQ_HANDLED;
+
+	if (ret & VCNL4040_PS_IF_CLOSE) {
+		iio_push_event(indio_dev,
+			       IIO_UNMOD_EVENT_CODE(IIO_PROXIMITY, 0,
+						    IIO_EV_TYPE_THRESH,
+						    IIO_EV_DIR_RISING),
+			       iio_get_time_ns(indio_dev));
+	}
+
+	if (ret & VCNL4040_PS_IF_AWAY) {
+		iio_push_event(indio_dev,
+			       IIO_UNMOD_EVENT_CODE(IIO_PROXIMITY, 0,
+						    IIO_EV_TYPE_THRESH,
+						    IIO_EV_DIR_FALLING),
+			       iio_get_time_ns(indio_dev));
+	}
+
+	return IRQ_HANDLED;
+}
+
 static ssize_t vcnl4000_read_near_level(struct iio_dev *indio_dev,
 					uintptr_t priv,
 					const struct iio_chan_spec *chan,
@@ -1042,6 +1194,18 @@  static const struct iio_event_spec vcnl4000_event_spec[] = {
 	}
 };
 
+static const struct iio_event_spec vcnl4040_event_spec[] = {
+	{
+		.type = IIO_EV_TYPE_THRESH,
+		.dir = IIO_EV_DIR_RISING,
+		.mask_separate = BIT(IIO_EV_INFO_VALUE) | BIT(IIO_EV_INFO_ENABLE),
+	}, {
+		.type = IIO_EV_TYPE_THRESH,
+		.dir = IIO_EV_DIR_FALLING,
+		.mask_separate = BIT(IIO_EV_INFO_VALUE) | BIT(IIO_EV_INFO_ENABLE),
+	},
+};
+
 static const struct iio_chan_spec vcnl4000_channels[] = {
 	{
 		.type = IIO_LIGHT,
@@ -1090,6 +1254,8 @@  static const struct iio_chan_spec vcnl4040_channels[] = {
 			BIT(IIO_CHAN_INFO_INT_TIME),
 		.info_mask_separate_available = BIT(IIO_CHAN_INFO_INT_TIME),
 		.ext_info = vcnl4000_ext_info,
+		.event_spec = vcnl4040_event_spec,
+		.num_event_specs = ARRAY_SIZE(vcnl4040_event_spec),
 	}
 };
 
@@ -1110,6 +1276,10 @@  static const struct iio_info vcnl4010_info = {
 static const struct iio_info vcnl4040_info = {
 	.read_raw = vcnl4000_read_raw,
 	.write_raw = vcnl4040_write_raw,
+	.read_event_value = vcnl4040_read_event,
+	.write_event_value = vcnl4040_write_event,
+	.read_event_config = vcnl4040_read_event_config,
+	.write_event_config = vcnl4040_write_event_config,
 	.read_avail = vcnl4040_read_avail,
 };
 
@@ -1146,6 +1316,7 @@  static const struct vcnl4000_chip_spec vcnl4000_chip_spec_cfg[] = {
 		.channels = vcnl4040_channels,
 		.num_channels = ARRAY_SIZE(vcnl4040_channels),
 		.info = &vcnl4040_info,
+		.irq_thread = vcnl4040_irq_thread,
 	},
 	[VCNL4200] = {
 		.prod = "VCNL4200",