diff mbox series

[v2,2/2] iio: adc: adding support for MCP3564 ADC

Message ID 20230714150051.637952-3-marius.cristea@microchip.com (mailing list archive)
State Changes Requested
Headers show
Series Adding support for Microchip MCP3564 ADC family | expand

Commit Message

marius.cristea@microchip.com July 14, 2023, 3 p.m. UTC
From: Marius Cristea <marius.cristea@microchip.com>

This is the iio driver for Microchip family of 153.6 ksps,
Low-Noise 16/24-Bit Delta-Sigma ADCs with an SPI interface
(Microchip's  MCP3461, MCP3462, MCP3464, MCP3461R, MCP3462R,
MCP3464R, MCP3561, MCP3562, MCP3564, MCP3561R,
MCP3562R and MCP3564R analog to digital converters).

Signed-off-by: Marius Cristea <marius.cristea@microchip.com>
---
 .../ABI/testing/sysfs-bus-iio-adc-mcp3564     |   53 +
 MAINTAINERS                                   |    7 +
 drivers/iio/adc/Kconfig                       |   13 +
 drivers/iio/adc/Makefile                      |    1 +
 drivers/iio/adc/mcp3564.c                     | 1485 +++++++++++++++++
 5 files changed, 1559 insertions(+)
 create mode 100644 Documentation/ABI/testing/sysfs-bus-iio-adc-mcp3564
 create mode 100644 drivers/iio/adc/mcp3564.c

Comments

Jonathan Cameron July 16, 2023, 3:54 p.m. UTC | #1
On Fri, 14 Jul 2023 18:00:51 +0300
<marius.cristea@microchip.com> wrote:

> From: Marius Cristea <marius.cristea@microchip.com>
> 
> This is the iio driver for Microchip family of 153.6 ksps,
> Low-Noise 16/24-Bit Delta-Sigma ADCs with an SPI interface
> (Microchip's  MCP3461, MCP3462, MCP3464, MCP3461R, MCP3462R,
> MCP3464R, MCP3561, MCP3562, MCP3564, MCP3561R,
> MCP3562R and MCP3564R analog to digital converters).
> 
> Signed-off-by: Marius Cristea <marius.cristea@microchip.com>
Hi Marius,

Various comments inline to add to the open question on how to
deal with the addressing that will hopefully get discussed alongside
the binding reviews.


> ---
>  .../ABI/testing/sysfs-bus-iio-adc-mcp3564     |   53 +
>  MAINTAINERS                                   |    7 +
>  drivers/iio/adc/Kconfig                       |   13 +
>  drivers/iio/adc/Makefile                      |    1 +
>  drivers/iio/adc/mcp3564.c                     | 1485 +++++++++++++++++
>  5 files changed, 1559 insertions(+)
>  create mode 100644 Documentation/ABI/testing/sysfs-bus-iio-adc-mcp3564
>  create mode 100644 drivers/iio/adc/mcp3564.c
> 
> diff --git a/Documentation/ABI/testing/sysfs-bus-iio-adc-mcp3564 b/Documentation/ABI/testing/sysfs-bus-iio-adc-mcp3564
> new file mode 100644
> index 000000000000..50393258be70
> --- /dev/null
> +++ b/Documentation/ABI/testing/sysfs-bus-iio-adc-mcp3564
> @@ -0,0 +1,53 @@
> +What:		/sys/bus/iio/devices/iio:deviceX/boost_current
> +KernelVersion:	6.4
> +Contact:	linux-iio@vger.kernel.org
> +Description:
> +		This attribute is used to set the biasing circuit of the
> +		Delta-Sigma modulator. The different BOOST settings are applied
> +		to the entire modulator circuit, including the voltage reference
> +		buffers.
> +
> +What:		/sys/bus/iio/devices/iio:deviceX/boost_current_available
> +KernelVersion:	6.4
> +Contact:	linux-iio@vger.kernel.org
> +Description:
> +		Reading returns a list with the possible values for
> +		the current biasing circuit of the Delta-Sigma modulator.
> +
> +What:		/sys/bus/iio/devices/iio:deviceX/enable_auto_zeroing_mux
> +KernelVersion:	6.4
> +Contact:	linux-iio@vger.kernel.org
> +Description:
> +		This attribute is used to enable the analog input multiplexer
> +		auto-zeroing algorithm (the input multiplexer and the ADC
> +		include an offset cancellation algorithm that cancels the offset
> +		contribution of the ADC). When the offset cancellation algorithm
> +		is enabled, ADC takes two conversions, one with the differential
> +		input as VIN+/VIN-, one with VIN+/VIN- inverted. In this case the
> +		conversion time is multiplied by two compared to the default
> +		case where the algorithm is disabled. This technique allows the
> +		cancellation of the ADC offset error and the achievement of
> +		ultra-low offset without any digital calibration. The resulting
> +		offset is the residue of the difference between the two
> +		conversions, which is on the order of magnitude of the noise
> +		floor. This offset is effectively canceled at every conversion,
> +		so the residual offset error temperature drift is extremely low.
> +		Write '1' to enable it, write '0' to disable it.
> +
> +What:		/sys/bus/iio/devices/iio:deviceX/enable_auto_zeroing_ref
IIO has usually gone with naming that would make this
auto_zeroing_ref_enable 

Just for consistency I'd prefer to keep to that form.

> +KernelVersion:	6.4
> +Contact:	linux-iio@vger.kernel.org
> +Description:
> +		This attribute is used to enable the chopping algorithm for the 
> +		internal voltage reference buffer. This setting has no effect
> +		when external voltage reference is selected.

Check below on whether to expose this seems to be based on whether the part
has an internal voltage reference, not whether it is used.  I think it should be
the is it used check.

> +		Internal voltage reference buffer injects a certain quantity of
> +		1/f noise into the system that can be modulated with the
> +		incoming input signals and can limit the SNR performance at
> +		higher Oversampling Ratio values (over 256). To overcome this
> +		limitation, the buffer includes an auto-zeroing algorithm that
> +		greatly reduces (cancels out) the 1/f noise and cancels the
> +		offset value of the reference buffer. As a result, the SNR of
> +		the system is not affected by this 1/f noise component of the
> +		reference buffer, even at maximum oversampling ratio values.
> +		Write '1' to enable it, write '0' to disable it.

..

> diff --git a/drivers/iio/adc/mcp3564.c b/drivers/iio/adc/mcp3564.c
> new file mode 100644
> index 000000000000..42828abb3db1
> --- /dev/null
> +++ b/drivers/iio/adc/mcp3564.c
> @@ -0,0 +1,1485 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * IIO driver for MCP356X/MCP356XR and MCP346X/MCP346XR series ADC chip family
> + *
> + * Copyright (C) 2022-2023 Microchip Technology Inc. and its subsidiaries
> + *
> + * Author: Marius Cristea <marius.cristea@microchip.com>
> + *
> + * Datasheet for MCP3561, MCP3562, MCP3564 can be found here:
> + * https://ww1.microchip.com/downloads/aemDocuments/documents/MSLD/ProductDocuments/DataSheets/MCP3561-2-4-Family-Data-Sheet-DS20006181C.pdf
> + * Datasheet for MCP3561R, MCP3562R, MCP3564R can be found here:
> + * https://ww1.microchip.com/downloads/aemDocuments/documents/APID/ProductDocuments/DataSheets/MCP3561_2_4R-Data-Sheet-DS200006391C.pdf
> + * Datasheet for MCP3461, MCP3462, MCP3464 can be found here:
> + * https://ww1.microchip.com/downloads/aemDocuments/documents/APID/ProductDocuments/DataSheets/MCP3461-2-4-Two-Four-Eight-Channel-153.6-ksps-Low-Noise-16-Bit-Delta-Sigma-ADC-Data-Sheet-20006180D.pdf
> + * Datasheet for MCP3461R, MCP3462R, MCP3464R can be found here:
> + * https://ww1.microchip.com/downloads/aemDocuments/documents/APID/ProductDocuments/DataSheets/MCP3461-2-4R-Family-Data-Sheet-DS20006404C.pdf
> + *
> + */
> +
> +#include <linux/acpi.h>
Why?

Check the others for anything else that isn't obviously used.

> +#include <linux/bitfield.h>
> +#include <linux/delay.h>
> +#include <linux/err.h>
> +#include <linux/iopoll.h>
> +#include <linux/regulator/consumer.h>
> +#include <linux/spi/spi.h>
> +#include <linux/units.h>
> +#include <linux/util_macros.h>
> +#include <asm/unaligned.h>
> +

> +/**
> + * struct mcp3564_state - working data for a ADC device
> + * @chip_info:		chip specific data
> + * @spi:		SPI device structure
> + * @vref:		the regulator device used as a voltage reference in case
> + *			external voltage reference is used
> + * @vref_mv:		voltage reference value in miliVolts
> + * @lock:		Synchronize access to driver's state members
> + * @dev_addr:		hardware device address
> + * @oversampling:	the index inside oversampling list of the ADC
> + * @hwgain:		the index inside hardware gain list of the ADC
> + * @scale_tbls		table with precalculated scale
> + * @calib_bias:		calibration bias value
> + * @calib_scale:	calibration scale value
> + * @current_boost_mode:	the index inside current boost list of the ADC
> + * @burnout:		the index inside current bias list of the ADC

burnout_mode

Build with W=1 and you should get warnings about this sort of thing if the
kernel-docs scripts can find a problem.

> + * @auto_zeroing_mux:	set if ADC auto-zeroing algorithm is enabled
> + * @auto_zeroing_ref:	set if ADC auto-Zeroing Reference Buffer Setting is enabled
> + * @has_vref:		Does the ADC has an internal voltage reference?
> + */
> +struct mcp3564_state {
> +	const struct mcp3564_chip_info	*chip_info;
> +	struct spi_device		*spi;
> +	struct regulator		*vref;
> +	unsigned short			vref_mv;
> +	struct mutex			lock; /* Synchronize access to driver's state members */
> +	u8				dev_addr;
> +	enum mcp3564_oversampling	oversampling;
> +	unsigned int			hwgain;
> +	unsigned int			scale_tbls[MCP3564_MAX_PGA][2];
> +	int				calib_bias;
> +	int				calib_scale;
> +	unsigned int			current_boost_mode;
> +	enum mcp3564_burnout		burnout_mode;
> +	bool				auto_zeroing_mux;
> +	bool				auto_zeroing_ref;
> +	bool				has_vref;
> +};
> +

> +static int mcp3564_read_16bits(struct mcp3564_state *adc, u8 reg, u16 *val)
> +{
> +	int ret;
> +	u8 tx_buf;
> +	u8 rx_buf[2];

__be16 for this (and similar in other cases) would ensure you don't need
the unaligned accessors.  I don't think there is any problem passing a __be16
pointer to spi_write_then_read.


> +
> +	tx_buf = mcp3564_cmd_read(adc->dev_addr, reg);
> +
> +	ret = spi_write_then_read(adc->spi, &tx_buf, sizeof(tx_buf),
> +				  rx_buf, sizeof(rx_buf));
> +	*val = get_unaligned_be16(rx_buf);
> +
> +	return ret;
> +}
> +
>
> +
> +static const struct iio_chan_spec mcp3564_channel_template = {
> +	.type = IIO_VOLTAGE,
> +	.indexed = 1,
> +	.differential = 1,
> +	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
> +	.info_mask_shared_by_all  = BIT(IIO_CHAN_INFO_SCALE)		|
> +				BIT(IIO_CHAN_INFO_CALIBSCALE)		|
> +				BIT(IIO_CHAN_INFO_CALIBBIAS)		|
> +				BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO),
> +	.info_mask_shared_by_all_available = BIT(IIO_CHAN_INFO_SCALE)	|
> +				BIT(IIO_CHAN_INFO_CALIBSCALE) |
> +				BIT(IIO_CHAN_INFO_CALIBBIAS)		|
> +				BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO),
> +	.ext_info = mcp3564_ext_info,
> +	.scan_type = {
> +		.sign = 's',
> +		.storagebits = 32,
> +		.endianness = IIO_BE,

This stuff only matters if you provide a buffered interface. Normally we introduce
it along with that rather than in advance like this.

> +	},
> +};
> +

> +
> +static const struct iio_chan_spec mcp3564_burnout_channel_template = {
> +	.extend_name = "burnout",
We generally try to avoid extend_name in new drivers because of the difficulty
of handling resulting filenames from userspace (+ difficulty of documentation which
is missing here I think).
Can we make this a label instead as those are under a separate file rather than
embedded in every file name associated with the channel.  See the read_label()
callback.

> +	.type = IIO_CURRENT,
> +	.output = true,
> +	.channel = 0,
> +	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
> +	.info_mask_separate_available = BIT(IIO_CHAN_INFO_RAW),
> +};
> +
> +static const struct mcp3564_chip_info mcp3564_chip_infos_tbl[] = {
> +	[mcp3461] = {
> +		.name = "mcp3461",
> +		.num_channels = 6,
> +		.resolution = 16,
> +	},
> +	[mcp3462] = {
> +		.name = "mcp3462",
> +		.num_channels = 18,
> +		.resolution = 16,
> +	},
> +	[mcp3464] = {
> +		.name = "mcp3464",
> +		.num_channels = 66,

How do we end up with so many channels?  + If this can be expressed
as a calculation that makes it clear where they all come from that
would act as useful documentation.

> +		.resolution = 16,
> +	},
> +	[mcp3561] = {
> +		.name = "mcp3561",
> +		.num_channels = 6,
> +		.resolution = 24,
> +	},
> +	[mcp3562] = {
> +		.name = "mcp3562",
> +		.num_channels = 18,
> +		.resolution = 24,
> +	},
> +	[mcp3564] = {
> +		.name = "mcp3564",
> +		.num_channels = 66,
> +		.resolution = 24,
> +	},
> +	[mcp3461r] = {
> +		.name = "mcp3461r",
> +		.num_channels = 6,
> +		.resolution = 16,
> +	},
> +	[mcp3462r] = {
> +		.name = "mcp3462r",
> +		.num_channels = 18,
> +		.resolution = 16,
> +	},
> +	[mcp3464r] = {
> +		.name = "mcp3464r",
> +		.num_channels = 66,
> +		.resolution = 16,
> +	},
> +	[mcp3561r] = {
> +		.name = "mcp3561r",
> +		.num_channels = 6,
> +		.resolution = 24,
> +	},
> +	[mcp3562r] = {
> +		.name = "mcp3562r",
> +		.num_channels = 18,
> +		.resolution = 24,
> +	},
> +	[mcp3564r] = {
> +		.name = "mcp3564r",
> +		.num_channels = 66,
> +		.resolution = 24,
> +	},
> +};
> +
> +static int mcp3564_read_single_value(struct iio_dev *indio_dev,
> +				     struct iio_chan_spec const *channel,
> +				     int *val)
> +{
> +	struct mcp3564_state *adc = iio_priv(indio_dev);
> +	int ret;
> +	u8 tmp;
> +	int ret_read = 0;
> +
> +	ret = mcp3564_write_8bits(adc, MCP3564_MUX, channel->address);
> +	if (ret)
> +		return ret;
> +
> +	/* Start ADC Conversion using fast command (overwrites ADC_MODE[1:0] = 11) */
> +	ret = mcp3564_fast_cmd(adc, MCP3564_FASTCMD_START);
> +	if (ret)
> +		return ret;
> +
> +	/*
> +	 * Check if the conversion is ready. If not, wait a little bit, and
> +	 * in case of timeout exit with an error.
> +	 */
> +	ret = read_poll_timeout(mcp3564_read_8bits, ret_read,
> +				ret_read || !(tmp & MCP3564_DATA_READY_MASK),
> +				20000, MCP3564_DATA_READY_TIMEOUT_MS * 1000, true,
> +				adc, MCP3564_IRQ, &tmp);
> +
> +	/* failed to read status register */
> +	if (ret_read)
> +		return ret;
> +
> +	if (ret)
> +		return -ETIMEDOUT;
> +
> +	if (tmp & MCP3564_DATA_READY_MASK)
> +		/* failing to finish conversion */
> +		return -EBUSY;
> +
> +	ret = mcp3564_read_32bits(adc, MCP3564_ADCDATA, val);
> +
> +	return ret;

	return mcp3..

> +}
> +

> +
> +static int mcp3564_read_raw(struct iio_dev *indio_dev,
> +			    struct iio_chan_spec const *channel,
> +			    int *val, int *val2, long mask)
> +{
> +	struct mcp3564_state *adc = iio_priv(indio_dev);
> +	int ret;
> +
> +	switch (mask) {
> +	case IIO_CHAN_INFO_RAW:
> +		if (channel->output) {
> +			*val = mcp3564_burnout_avail[adc->burnout_mode][0];
> +			*val2 = mcp3564_burnout_avail[adc->burnout_mode][1];
> +			return IIO_VAL_INT_PLUS_MICRO;
> +		}
> +

I don't follow the locking logic currently. I expected to see protection
around this.

> +		ret = mcp3564_read_single_value(indio_dev, channel, val);
> +		if (ret)
> +			return -EINVAL;
> +		else
> +			return IIO_VAL_INT;
> +	case IIO_CHAN_INFO_SCALE:
> +		mutex_lock(&adc->lock);
> +		*val = adc->scale_tbls[adc->hwgain][0];
> +		*val2 = adc->scale_tbls[adc->hwgain][1];
> +		mutex_unlock(&adc->lock);
> +		return IIO_VAL_INT_PLUS_NANO;
> +	case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
> +		*val = mcp3564_oversampling_avail[adc->oversampling];
> +		return IIO_VAL_INT;
> +	case IIO_CHAN_INFO_CALIBBIAS:
> +		*val = adc->calib_bias;
> +		return IIO_VAL_INT;
> +	case IIO_CHAN_INFO_CALIBSCALE:
> +		*val = adc->calib_scale;
> +		return IIO_VAL_INT;
> +	default:
> +		return -EINVAL;
> +	}
> +}
> +

> +
> +static int mcp3564_write_raw(struct iio_dev *indio_dev,
> +			     struct iio_chan_spec const *channel, int val,
> +			     int val2, long mask)
> +{
> +	struct mcp3564_state *adc = iio_priv(indio_dev);
> +	int tmp;
> +	unsigned int hwgain;
> +	enum mcp3564_burnout burnout;
> +	int ret = 0;
> +
> +	switch (mask) {
> +	case IIO_CHAN_INFO_RAW:
> +		if (channel->output) {
> +			for (burnout = 0; burnout < MCP3564_MAX_BURNOUT_IDX; burnout++) {
> +				if (val == mcp3564_burnout_avail[burnout][0] &&
> +				    val2 == mcp3564_burnout_avail[burnout][1])
> +					break;
> +			}
> +
> +			if (burnout == MCP3564_MAX_BURNOUT_IDX)
> +				return -EINVAL;
> +
> +			if (burnout == adc->burnout_mode)
> +				return ret;
> +
> +			mutex_lock(&adc->lock);
> +			ret = mcp3564_update_8bits(adc, MCP3564_CONFIG0,
> +						   MCP3564_CS_SEL_MASK,
> +						   MCP3564_CS_SEL_SET(burnout));
> +
> +			if (ret)
> +				dev_err(&indio_dev->dev, "Failed to configure burnout current\n");
> +			else
> +				adc->burnout_mode = burnout;
> +			break;
> +		}
> +		return -EINVAL;
> +	case IIO_CHAN_INFO_CALIBBIAS:
> +		if (val < mcp3564_calib_bias[0] && val > mcp3564_calib_bias[2])
> +			return -EINVAL;
> +
> +		mutex_lock(&adc->lock);
> +		ret = mcp3564_write_24bits(adc, MCP3564_OFFSETCAL, val);
> +		if (!ret)
> +			adc->calib_bias = val;
> +		break;
> +	case IIO_CHAN_INFO_CALIBSCALE:
> +		if (val < mcp3564_calib_bias[0] && val > mcp3564_calib_bias[2])
> +			return -EINVAL;
> +
> +		if (adc->calib_scale == val)
> +			return ret;
> +
> +		mutex_lock(&adc->lock);
> +		ret = mcp3564_write_24bits(adc, MCP3564_GAINCAL, val);
> +		if (!ret)
> +			adc->calib_scale = val;
> +		break;
> +	case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
> +		if (val < 0)
> +			return -EINVAL;
> +
> +		tmp = find_closest(val, mcp3564_oversampling_avail,
> +				   ARRAY_SIZE(mcp3564_oversampling_avail));
> +
> +		if (adc->oversampling == tmp)
> +			return ret;
> +
> +		mutex_lock(&adc->lock);
> +		ret = mcp3564_update_8bits(adc, MCP3564_CONFIG1, MCP3564_OVERSPL_RATIO_MASK,
> +					   MCP3564_OVERSAMPLING_RATIO_SET(adc->oversampling));
> +		if (!ret)
> +			adc->oversampling = tmp;
> +		break;
> +	case IIO_CHAN_INFO_SCALE:
> +		for (hwgain = 0; hwgain < MCP3564_MAX_PGA; hwgain++) {
> +			if (val == adc->scale_tbls[hwgain][0] &&
> +			    val2 == adc->scale_tbls[hwgain][1])
> +				break;
> +		}
> +
> +		if (hwgain == MCP3564_MAX_PGA)
> +			return -EINVAL;
> +
> +		if (hwgain == adc->hwgain)
> +			return ret;
> +
> +		mutex_lock(&adc->lock);
> +		/* Update GAIN in CONFIG2[5:3] -> GAIN[2:0]*/
> +		ret = mcp3564_update_8bits(adc, MCP3564_CONFIG2, MCP3564_HARDWARE_GAIN_MASK,
> +					   MCP3564_HARDWARE_GAIN_SET(hwgain));
> +		if (!ret)
> +			adc->hwgain = hwgain;
> +		break;
> +	default:
> +		return -EINVAL;
> +	}
> +
> +	mutex_unlock(&adc->lock);
Push the unlock up to the same level that you have the lock at.
You will get more code repetition but it will be easier to read.

> +
> +	return ret;
> +}

> +
> +static void mcp3564_disable_reg(void *reg)
> +{
> +	if (reg)
> +		regulator_disable(reg);

This shouldn't be registered this unless reg is true.
So check shouldn't be needed.

> +}
> +

> +static int mcp3564_config(struct iio_dev *indio_dev)
> +{
> +	struct mcp3564_state *adc = iio_priv(indio_dev);
> +	struct device *dev = &adc->spi->dev;
> +	u8 tmp_reg;
> +	u16 tmp_u16;
> +	enum mcp3564_ids ids;
> +	int ret = 0;
> +	unsigned int tmp = 0x01;
> +
> +	/*
> +	 * The address is set on a per-device basis by fuses in the factory,
> +	 * configured on request. If not requested, the fuses are set for 0x1.
> +	 * The device address is part of the device markings to avoid
> +	 * potential confusion. This address is coded on two bits, so four possible
> +	 * addresses are available when multiple devices are present on the same
> +	 * SPI bus with only one Chip Select line for all devices.
> +	 */
> +	device_property_read_u32(dev, "microchip,hw-device-address", &tmp);
> +
> +	if (tmp > 3) {
> +		dev_err_probe(dev, tmp,
> +			      "invalid device address. Must be in range 0-3.\n");
> +		return -EINVAL;
> +	}
> +
> +	adc->dev_addr = 0xff & tmp;

device_property_read_u8() and no mask? though it can't be bigger than 3 anyway..


> +
> +	dev_dbg(dev, "use device address %i\n", adc->dev_addr);
> +
> +	ret = mcp3564_read_8bits(adc, MCP3564_RESERVED_C, &tmp_reg);
> +	if (ret < 0)
> +		return ret;
> +
> +	switch (tmp_reg) {
> +	case MCP3564_REG_C_DEFAULT:
> +		adc->has_vref = false;
> +		break;
> +	case MCP3564R_REG_C_DEFAULT:
> +		adc->has_vref = true;
> +		break;
> +	default:
> +		dev_err_probe(dev, tmp_reg, "Unknown chip found\n");
> +		return -EINVAL;

At this point normal thing to do is dev_info() to moan that we don't konw what
it is, but then carry on on basis that we are probably looking at a dt-binding
that is using fallback compatible to deal with some newer part number.
So we tend to just trust the firmware if this happens.

Obviously if we can identify the part in the driver we should always do
so but sometimes the driver is older than the device.

> +	}
> +
> +	ret = mcp3564_read_16bits(adc, MCP3564_RESERVED_E, &tmp_u16);
> +	if (ret < 0)
> +		return ret;
> +
> +	switch (tmp_u16 & MCP3564_HW_ID_MASK) {
> +	case MCP3461_HW_ID:
> +		if (adc->has_vref)
> +			ids = mcp3461r;
> +		else
> +			ids = mcp3461;
> +		break;
> +	case MCP3462_HW_ID:
> +		if (adc->has_vref)
> +			ids = mcp3462r;
> +		else
> +			ids = mcp3462;
> +		break;
> +	case MCP3464_HW_ID:
> +		if (adc->has_vref)
> +			ids = mcp3464r;
> +		else
> +			ids = mcp3464;
> +		break;
> +	case MCP3561_HW_ID:
> +		if (adc->has_vref)
> +			ids = mcp3561r;
> +		else
> +			ids = mcp3561;
> +		break;
...

Jonathan
diff mbox series

Patch

diff --git a/Documentation/ABI/testing/sysfs-bus-iio-adc-mcp3564 b/Documentation/ABI/testing/sysfs-bus-iio-adc-mcp3564
new file mode 100644
index 000000000000..50393258be70
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-iio-adc-mcp3564
@@ -0,0 +1,53 @@ 
+What:		/sys/bus/iio/devices/iio:deviceX/boost_current
+KernelVersion:	6.4
+Contact:	linux-iio@vger.kernel.org
+Description:
+		This attribute is used to set the biasing circuit of the
+		Delta-Sigma modulator. The different BOOST settings are applied
+		to the entire modulator circuit, including the voltage reference
+		buffers.
+
+What:		/sys/bus/iio/devices/iio:deviceX/boost_current_available
+KernelVersion:	6.4
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Reading returns a list with the possible values for
+		the current biasing circuit of the Delta-Sigma modulator.
+
+What:		/sys/bus/iio/devices/iio:deviceX/enable_auto_zeroing_mux
+KernelVersion:	6.4
+Contact:	linux-iio@vger.kernel.org
+Description:
+		This attribute is used to enable the analog input multiplexer
+		auto-zeroing algorithm (the input multiplexer and the ADC
+		include an offset cancellation algorithm that cancels the offset
+		contribution of the ADC). When the offset cancellation algorithm
+		is enabled, ADC takes two conversions, one with the differential
+		input as VIN+/VIN-, one with VIN+/VIN- inverted. In this case the
+		conversion time is multiplied by two compared to the default
+		case where the algorithm is disabled. This technique allows the
+		cancellation of the ADC offset error and the achievement of
+		ultra-low offset without any digital calibration. The resulting
+		offset is the residue of the difference between the two
+		conversions, which is on the order of magnitude of the noise
+		floor. This offset is effectively canceled at every conversion,
+		so the residual offset error temperature drift is extremely low.
+		Write '1' to enable it, write '0' to disable it.
+
+What:		/sys/bus/iio/devices/iio:deviceX/enable_auto_zeroing_ref
+KernelVersion:	6.4
+Contact:	linux-iio@vger.kernel.org
+Description:
+		This attribute is used to enable the chopping algorithm for the 
+		internal voltage reference buffer. This setting has no effect
+		when external voltage reference is selected.
+		Internal voltage reference buffer injects a certain quantity of
+		1/f noise into the system that can be modulated with the
+		incoming input signals and can limit the SNR performance at
+		higher Oversampling Ratio values (over 256). To overcome this
+		limitation, the buffer includes an auto-zeroing algorithm that
+		greatly reduces (cancels out) the 1/f noise and cancels the
+		offset value of the reference buffer. As a result, the SNR of
+		the system is not affected by this 1/f noise component of the
+		reference buffer, even at maximum oversampling ratio values.
+		Write '1' to enable it, write '0' to disable it.
diff --git a/MAINTAINERS b/MAINTAINERS
index 6969a2962ffe..50c879f85e1e 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -13798,6 +13798,13 @@  S:	Supported
 F:	Documentation/devicetree/bindings/regulator/mcp16502-regulator.txt
 F:	drivers/regulator/mcp16502.c
 
+MICROCHIP MCP3564 ADC DRIVER
+M:      Marius Cristea <marius.cristea@microchip.com>
+L:      linux-iio@vger.kernel.org
+S:      Supported
+F:      Documentation/devicetree/bindings/iio/adc/microchip,mcp3564.yaml
+F:      drivers/iio/adc/mcp3564.c
+
 MICROCHIP MCP3911 ADC DRIVER
 M:	Marcus Folkesson <marcus.folkesson@gmail.com>
 M:	Kent Gustavsson <kent@minoris.se>
diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
index 53098aca06ea..782bf5eec8ed 100644
--- a/drivers/iio/adc/Kconfig
+++ b/drivers/iio/adc/Kconfig
@@ -768,6 +768,19 @@  config MCP3422
 	  This driver can also be built as a module. If so, the module will be
 	  called mcp3422.
 
+config MCP3564
+        tristate "Microchip Technology MCP3461/2/4/R, MCP3561/2/4/R driver"
+        depends on SPI
+        depends on IIO
+        help
+          Say yes here to build support for Microchip Technology's MCP3461,
+          MCP3462, MCP3464, MCP3461R, MCP3462R, MCP3464R, MCP3561, MCP3562,
+          MCP3564, MCP3561R, MCP3562R and MCP3564R analog to digital
+          converters.
+
+          This driver can also be built as a module. If so, the module will be
+          called mcp3564.
+
 config MCP3911
 	tristate "Microchip Technology MCP3911 driver"
 	depends on SPI
diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
index e07e4a3e6237..91f713af574f 100644
--- a/drivers/iio/adc/Makefile
+++ b/drivers/iio/adc/Makefile
@@ -70,6 +70,7 @@  obj-$(CONFIG_MAX1363) += max1363.o
 obj-$(CONFIG_MAX9611) += max9611.o
 obj-$(CONFIG_MCP320X) += mcp320x.o
 obj-$(CONFIG_MCP3422) += mcp3422.o
+obj-$(CONFIG_MCP3564) += mcp3564.o
 obj-$(CONFIG_MCP3911) += mcp3911.o
 obj-$(CONFIG_MEDIATEK_MT6360_ADC) += mt6360-adc.o
 obj-$(CONFIG_MEDIATEK_MT6370_ADC) += mt6370-adc.o
diff --git a/drivers/iio/adc/mcp3564.c b/drivers/iio/adc/mcp3564.c
new file mode 100644
index 000000000000..42828abb3db1
--- /dev/null
+++ b/drivers/iio/adc/mcp3564.c
@@ -0,0 +1,1485 @@ 
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * IIO driver for MCP356X/MCP356XR and MCP346X/MCP346XR series ADC chip family
+ *
+ * Copyright (C) 2022-2023 Microchip Technology Inc. and its subsidiaries
+ *
+ * Author: Marius Cristea <marius.cristea@microchip.com>
+ *
+ * Datasheet for MCP3561, MCP3562, MCP3564 can be found here:
+ * https://ww1.microchip.com/downloads/aemDocuments/documents/MSLD/ProductDocuments/DataSheets/MCP3561-2-4-Family-Data-Sheet-DS20006181C.pdf
+ * Datasheet for MCP3561R, MCP3562R, MCP3564R can be found here:
+ * https://ww1.microchip.com/downloads/aemDocuments/documents/APID/ProductDocuments/DataSheets/MCP3561_2_4R-Data-Sheet-DS200006391C.pdf
+ * Datasheet for MCP3461, MCP3462, MCP3464 can be found here:
+ * https://ww1.microchip.com/downloads/aemDocuments/documents/APID/ProductDocuments/DataSheets/MCP3461-2-4-Two-Four-Eight-Channel-153.6-ksps-Low-Noise-16-Bit-Delta-Sigma-ADC-Data-Sheet-20006180D.pdf
+ * Datasheet for MCP3461R, MCP3462R, MCP3464R can be found here:
+ * https://ww1.microchip.com/downloads/aemDocuments/documents/APID/ProductDocuments/DataSheets/MCP3461-2-4R-Family-Data-Sheet-DS20006404C.pdf
+ *
+ */
+
+#include <linux/acpi.h>
+#include <linux/bitfield.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/iopoll.h>
+#include <linux/regulator/consumer.h>
+#include <linux/spi/spi.h>
+#include <linux/units.h>
+#include <linux/util_macros.h>
+#include <asm/unaligned.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+
+#define MCP3564_ADCDATA		0x00
+#define MCP3564_CONFIG0		0x01
+#define MCP3564_CONFIG1		0x02
+#define MCP3564_CONFIG2		0x03
+#define MCP3564_CONFIG3		0x04
+#define MCP3564_IRQ		0x05
+#define MCP3564_MUX		0x06
+#define MCP3564_SCAN		0x07
+#define MCP3564_TIMER		0x08
+#define MCP3564_OFFSETCAL	0x09
+#define MCP3564_GAINCAL		0x0A
+#define MCP3564_RESERVED_B	0x0B
+#define MCP3564_RESERVED_C	0x0C
+#define MCP3564_LOCK		0x0D
+#define MCP3564_RESERVED_E	0x0E
+#define MCP3564_CRCCFG		0x0F
+
+#define MCP3564_CMD_HW_ADDR_MASK	GENMASK(7, 6)
+#define MCP3564_CMD_HW_ADDR_SET(x)	((u8)FIELD_PREP(MCP3564_CMD_HW_ADDR_MASK, (x)))
+#define MCP3564_CMD_ADDR_MASK		GENMASK(5, 2)
+#define MCP3564_CMD_ADDR_SET(x)		((u8)FIELD_PREP(MCP3564_CMD_ADDR_MASK, (x)))
+
+#define MCP3564_FASTCMD_START	0x0A
+#define MCP3564_FASTCMD_RESET	0x0E
+
+#define MCP3461_HW_ID		0x0008
+#define MCP3462_HW_ID		0x0009
+#define MCP3464_HW_ID		0x000B
+
+#define MCP3561_HW_ID		0x000C
+#define MCP3562_HW_ID		0x000D
+#define MCP3564_HW_ID		0x000F
+#define MCP3564_HW_ID_MASK	GENMASK(3, 0)
+
+#define MCP3564_REG_C_DEFAULT	0x50
+#define MCP3564R_REG_C_DEFAULT	0x30
+
+#define MCP3564R_INT_VREF_MV	2400
+
+/* MUX_VIN Input Selection */
+#define MCP3564_CH0		0
+#define MCP3564_CH1		1
+#define MCP3564_CH2		2
+#define MCP3564_CH3		3
+#define MCP3564_CH4		4
+#define MCP3564_CH5		5
+#define MCP3564_CH6		6
+#define MCP3564_CH7		7
+#define MCP3564_AGND		8
+#define MCP3564_AVDD		9
+#define MCP3564_RESERVED	10 /* do not use */
+#define MCP3564_REFIN_POZ	11
+#define MCP3564_REFIN_NEG	12
+#define MCP3564_TEMP_DIODE_P	13
+#define MCP3564_TEMP_DIODE_M	14
+#define MCP3564_INTERNAL_VCM	15
+
+/* CONFIG 0 Register */
+#define MCP3564_ADC_MODE_DEFAULT		0x00
+#define MCP3564_ADC_MODE_SHUTDOWN		0x01
+#define MCP3564_ADC_MODE_STANDBY		0x02
+#define MCP3564_ADC_MODE_CONVERSION		0x03
+#define MCP3564_ADC_MODE_MASK			GENMASK(1, 0)
+#define MCP3564_ADC_MODE_MASK_SET(x)		((u8)FIELD_PREP(MCP3564_ADC_MODE_MASK, (x)))
+
+#define MCP3564_CS_SEL_MASK			GENMASK(3, 2)
+#define MCP3564_CS_SEL_SET(x)			((u8)FIELD_PREP(MCP3564_CS_SEL_MASK, (x)))
+
+/*
+ * 0b11 = Internal clock is selected and AMCLK is present on the analog master clock output pin.
+ * 0b10 = Internal clock is selected and no clock output is present on the CLK pin.
+ * 0b01 = External digital clock
+ * 0b00 = External digital clock (default)
+ */
+#define MCP3564_USE_INTERNAL_CLK_OUTPUT_EN	0x03
+#define MCP3564_USE_INTERNAL_CLK		0x02
+#define MCP3564_USE_EXTERNAL_CLK		0x01
+#define MCP3564_USE_EXTERNAL_CLK_DEFAULT	0x00
+#define MCP3564_CLK_SEL_MASK			GENMASK(5, 4)
+#define MCP3564_CLK_SEL_SET(x)			((u8)FIELD_PREP(MCP3564_CLK_SEL_MASK, (x)))
+
+#define MCP3456_CONFIG0_BIT6_DEFAULT		BIT(6)
+
+#define MCP3456_CONFIG0_VREF_MASK		BIT(7)
+#define MCP3564_VREF_SET(x)			((u8)FIELD_PREP(MCP3456_CONFIG0_VREF_MASK, (x)))
+
+/* CONFIG 1 Register */
+#define MCP3564_OVERSPL_RATIO_MASK		GENMASK(5, 2)
+#define MCP3564_OVERSAMPLING_RATIO_SET(x)	((u8)FIELD_PREP(MCP3564_OVERSPL_RATIO_MASK, (x)))
+
+/* CONFIG 2 Register */
+#define MCP3564_BOOST_CURRENT_x0_50	0x00
+#define MCP3564_BOOST_CURRENT_x0_66	0x01
+#define MCP3564_BOOST_CURRENT_x1_00	0x02
+#define MCP3564_BOOST_CURRENT_x2_00	0x03
+
+#define MCP3564_BOOST_CURRENT_MASK	GENMASK(7, 6)
+#define MCP3564_BOOST_CURRENT_SET(x)	((u8)FIELD_PREP(MCP3564_BOOST_CURRENT_MASK, (x)))
+
+#define MCP3564_DEFAULT_HARDWARE_GAIN	0x01
+#define MCP3564_HARDWARE_GAIN_MASK	GENMASK(5, 3)
+#define MCP3564_HARDWARE_GAIN_SET(x)	((u8)FIELD_PREP(MCP3564_HARDWARE_GAIN_MASK, (x)))
+
+/* Auto-Zeroing MUX Setting */
+#define MCP3564_AZ_MUX_MASK		BIT(2)
+#define MCP3564_AZ_MUX_SET(x)		((u8)FIELD_PREP(MCP3564_AZ_MUX_MASK, (x)))
+
+/* Auto-Zeroing REF Setting */
+#define MCP3564_AZ_REF_MASK		BIT(1)
+#define MCP3564_AZ_REF_SET(x)		((u8)FIELD_PREP(MCP3564_AZ_REF_MASK, (x)))
+
+/*
+ * CONFIG 3 Register - Conversion Mode Selection
+ * 0b11 = Continuous Conversion mode or continuous conversion cycle in SCAN mode.
+ * 0b10 = One-shot conversion or one-shot cycle in SCAN mode. It sets ADC_MODE[1:0] to ‘10’
+ *        (standby) at the end of the conversion or at the end of the conversion cycle in SCAN mode.
+ * 0b0x = One-shot conversion or one-shot cycle in SCAN mode. It sets ADC_MODE[1:0] to ‘0x’ (ADC
+ *        Shutdown) at the end of the conversion or at the end of the conversion cycle in SCAN
+ *        mode (default).
+ */
+#define MCP3464_CONV_MODE_CONTINUOUS		3
+#define MCP3464_CONV_MODE_ONE_SHOT_STANDBY	2
+#define MCP3464_CONV_MODE_ONE_SHOT_SHUTDOWN	0
+#define MCP3464_CONV_MODE_MASK			GENMASK(7, 6)
+#define MCP3564_CONV_MODE_SET(x)		((u8)FIELD_PREP(MCP3464_CONV_MODE_MASK, (x)))
+
+/*
+ * CONFIG 3 Register - ADC Output Data Format Selection
+ * 0b11 = 32-bit (25-bit right justified data + Channel ID):
+ *        CHID[3:0] + SGN extension (4 bits) + 24-bit ADC data.
+ *        It allows overrange with the SGN extension.
+ * 0b10 = 32-bit (25-bit right justified data):
+ *        SGN extension (8-bit) + 24-bit ADC data.
+ *        It allows overrange with the SGN extension.
+ * 0b01 = 32-bit (24-bit left justified data):
+ *        24-bit ADC data + 0x00 (8-bit).
+ *        It does not allow overrange (ADC code locked to 0xFFFFFF or 0x800000).
+ * 0b00 = 24-bit (default ADC coding): 24-bit ADC data.
+ *        It does not allow overrange (ADC code locked to 0xFFFFFF or 0x800000).
+ */
+#define MCP3456_DATA_FORMAT_32B_WITH_CH_ID	3
+#define MCP3456_DATA_FORMAT_32B_SGN_EXT		2
+#define MCP3456_DATA_FORMAT_32B_LEFT_JUSTIFIED	1
+#define MCP3456_DATA_FORMAT_24B			0
+#define MCP3464_DATA_FORMAT_MASK		GENMASK(5, 4)
+#define MCP3564_DATA_FORMAT_SET(x)		((u8)FIELD_PREP(MCP3464_DATA_FORMAT_MASK, (x)))
+
+#define MCP3464_CRC_FORMAT		BIT(3)
+#define MCP3464_EN_CRCCOM		BIT(2)
+#define MCP3464_EN_OFFCAL		BIT(1)
+#define MCP3464_EN_GAINCAL		BIT(0)
+
+/* IRQ REGISTER */
+#define MCP3564_DATA_READY_MASK		BIT(6)
+#define MCP3564_CRCCFG_STATUS		BIT(5)
+#define MCP3564_POR_STATUS		BIT(4)
+#define MCP3464_IRQ_MODE_1		BIT(3)
+#define MCP3464_IRQ_MODE_0		BIT(2)
+#define MCP3464_EN_FASTCMD		BIT(1)
+#define MCP3464_EN_STP			BIT(0)
+
+/* MULTIPLEXER (MUX) REGISTER */
+#define MCP3564_MUX_VIN_P_MASK		GENMASK(7, 4)
+#define MCP3564_MUX_VIN_N_MASK		GENMASK(3, 0)
+#define MCP3564_MUX_SET(x, y)		((u8)FIELD_PREP(MCP3564_MUX_VIN_P_MASK, (x)) |	\
+					 (u8)FIELD_PREP(MCP3564_MUX_VIN_N_MASK, (y)))
+
+/* SCAN REGISTER */
+#define MCP3564_DELAY_TIME_MASK		GENMASK(23, 21)
+#define MCP3564_DELAY_TIME_SET(x)	((u32)FIELD_PREP(MCP3564_DELAY_TIME_MASK, (x)))
+
+#define MCP3564_SCAN_DEFAULT_VALUE	0
+#define MCP3564_SCAN_CH_SEL_MASK	GENMASK(15, 0)
+#define MCP3564_SCAN_CH_SEL_SET(x)	((u32)FIELD_PREP(MCP3564_SCAN_CH_SEL_MASK, (x)))
+
+/* TIMER REGISTER */
+#define MCP3564_TIMER_DEFAULT_VALUE	0
+#define MCP3564_TIMER_MASK		GENMASK(23, 0)
+#define MCP3564_TIMER_SET(x)		((u32)FIELD_PREP(MCP3564_TIMER_MASK, (x)))
+
+/* OFFSETCAL REGISTER */
+#define MCP3564_DEFAULT_OFFSETCAL	0
+#define MCP3564_OFFSETCAL_MASK		GENMASK(23, 0)
+#define MCP3564_OFFSETCAL_SET(x)	((u32)FIELD_PREP(MCP3564_OFFSETCAL_MASK, (x)))
+
+/* GAINCAL REGISTER */
+#define MCP3564_DEFAULT_GAINCAL		0x00800000
+#define MCP3564_GAINCAL_MASK		GENMASK(23, 0)
+#define MCP3564_GAINCAL_SET(x)		((u32)FIELD_PREP(MCP3564_GAINCAL_MASK, (x)))
+
+#define MCP3564_DATA_READY_TIMEOUT_MS	2000
+
+#define MCP3564_LOCK_WRITE_ACCESS_PASSWORD	0xA5
+
+#define MCP3564_MAX_PGA				8
+#define MCP3564_MAX_BURNOUT_IDX			4
+
+#define MCP3564_DEV_ATTR(name) (&iio_dev_attr_##name.dev_attr.attr)
+
+enum mcp3564_ids {
+	mcp3461,
+	mcp3462,
+	mcp3464,
+	mcp3561,
+	mcp3562,
+	mcp3564,
+	mcp3461r,
+	mcp3462r,
+	mcp3464r,
+	mcp3561r,
+	mcp3562r,
+	mcp3564r,
+};
+
+enum mcp3564_delay_time {
+	MCP3564_NO_DELAY,
+	MCP3564_DELAY_8_DMCLK,
+	MCP3564_DELAY_16_DMCLK,
+	MCP3564_DELAY_32_DMCLK,
+	MCP3564_DELAY_64_DMCLK,
+	MCP3564_DELAY_128_DMCLK,
+	MCP3564_DELAY_256_DMCLK,
+	MCP3564_DELAY_512_DMCLK
+};
+
+enum mcp3564_burnout {
+	MCP3564_CS_SEL_0_0_uA,
+	MCP3564_CS_SEL_0_9_uA,
+	MCP3564_CS_SEL_3_7_uA,
+	MCP3564_CS_SEL_15_uA
+};
+
+enum mcp3564_oversampling {
+	MCP3564_OVERSAMPLING_RATIO_32,
+	MCP3564_OVERSAMPLING_RATIO_64,
+	MCP3564_OVERSAMPLING_RATIO_128,
+	MCP3564_OVERSAMPLING_RATIO_256,
+	MCP3564_OVERSAMPLING_RATIO_512,
+	MCP3564_OVERSAMPLING_RATIO_1024,
+	MCP3564_OVERSAMPLING_RATIO_2048,
+	MCP3564_OVERSAMPLING_RATIO_4096,
+	MCP3564_OVERSAMPLING_RATIO_8192,
+	MCP3564_OVERSAMPLING_RATIO_16384,
+	MCP3564_OVERSAMPLING_RATIO_20480,
+	MCP3564_OVERSAMPLING_RATIO_24576,
+	MCP3564_OVERSAMPLING_RATIO_40960,
+	MCP3564_OVERSAMPLING_RATIO_49152,
+	MCP3564_OVERSAMPLING_RATIO_81920,
+	MCP3564_OVERSAMPLING_RATIO_98304
+};
+
+static const unsigned int mcp3564_oversampling_avail[] = {
+	[MCP3564_OVERSAMPLING_RATIO_32] = 32,
+	[MCP3564_OVERSAMPLING_RATIO_64] = 64,
+	[MCP3564_OVERSAMPLING_RATIO_128] = 128,
+	[MCP3564_OVERSAMPLING_RATIO_256] = 256,
+	[MCP3564_OVERSAMPLING_RATIO_512] = 512,
+	[MCP3564_OVERSAMPLING_RATIO_1024] = 1024,
+	[MCP3564_OVERSAMPLING_RATIO_2048] = 2048,
+	[MCP3564_OVERSAMPLING_RATIO_4096] = 4096,
+	[MCP3564_OVERSAMPLING_RATIO_8192] = 8192,
+	[MCP3564_OVERSAMPLING_RATIO_16384] = 16384,
+	[MCP3564_OVERSAMPLING_RATIO_20480] = 20480,
+	[MCP3564_OVERSAMPLING_RATIO_24576] = 24576,
+	[MCP3564_OVERSAMPLING_RATIO_40960] = 40960,
+	[MCP3564_OVERSAMPLING_RATIO_49152] = 49152,
+	[MCP3564_OVERSAMPLING_RATIO_81920] = 81920,
+	[MCP3564_OVERSAMPLING_RATIO_98304] = 98304
+};
+
+/*
+ * Current Source/Sink Selection Bits for Sensor Bias (source on VIN+/sink on VIN-)
+ */
+static const int mcp3564_burnout_avail[][2] = {
+	[MCP3564_CS_SEL_0_0_uA] = {0, 0},
+	[MCP3564_CS_SEL_0_9_uA] = {0, 900},
+	[MCP3564_CS_SEL_3_7_uA] = {0, 3700},
+	[MCP3564_CS_SEL_15_uA] = {0, 15000}
+};
+
+/*
+ * BOOST[1:0]: ADC Bias Current Selection
+ */
+static const char * const mcp3564_boost_current_avail[] = {
+	[MCP3564_BOOST_CURRENT_x0_50] = "0.5",
+	[MCP3564_BOOST_CURRENT_x0_66] = "0.66",
+	[MCP3564_BOOST_CURRENT_x1_00] = "1",
+	[MCP3564_BOOST_CURRENT_x2_00] = "2",
+};
+
+/*
+ * Calibration bias values
+ */
+static const int mcp3564_calib_bias[] = {
+	-8388608,	/* min: -2^23		*/
+	 1,		/* step: 1		*/
+	 8388607	/* max:  2^23 - 1	*/
+};
+
+/*
+ * Calibration scale values
+ * The Gain Error Calibration register (GAINCAL) is an
+ * unsigned 24-bit register that holds the digital gain error
+ * calibration value, GAINCAL which could be calculated by
+ * GAINCAL (V/V) = (GAINCAL[23:0])/8388608
+ * The gain error calibration value range in equivalent voltage is [0; 2-2^(-23)]
+ */
+static const unsigned int mcp3564_calib_scale[] = {
+	0,		/* min:  0		*/
+	1,		/* step: 1/8388608	*/
+	16777215	/* max:  2 - 2^(-23)	*/
+};
+
+/* Programmable hardware gain x1/3, x1, x2, x4, x8, x16, x32, x64 */
+static const int mcp3564_hwgain_frac[] = {
+	3, 10,
+	1, 1,
+	2, 1,
+	4, 1,
+	8, 1,
+	16, 1,
+	32, 1,
+	64, 1
+};
+
+/**
+ * struct mcp3564_chip_info - chip specific data
+ * @channels:		struct iio_chan_spec matching the device's capabilities
+ * @num_channels:	number of channels
+ * @resolution:		ADC resolution
+ */
+struct mcp3564_chip_info {
+	const char	*name;
+	unsigned int	num_channels;
+	unsigned int	resolution;
+};
+
+/**
+ * struct mcp3564_state - working data for a ADC device
+ * @chip_info:		chip specific data
+ * @spi:		SPI device structure
+ * @vref:		the regulator device used as a voltage reference in case
+ *			external voltage reference is used
+ * @vref_mv:		voltage reference value in miliVolts
+ * @lock:		Synchronize access to driver's state members
+ * @dev_addr:		hardware device address
+ * @oversampling:	the index inside oversampling list of the ADC
+ * @hwgain:		the index inside hardware gain list of the ADC
+ * @scale_tbls		table with precalculated scale
+ * @calib_bias:		calibration bias value
+ * @calib_scale:	calibration scale value
+ * @current_boost_mode:	the index inside current boost list of the ADC
+ * @burnout:		the index inside current bias list of the ADC
+ * @auto_zeroing_mux:	set if ADC auto-zeroing algorithm is enabled
+ * @auto_zeroing_ref:	set if ADC auto-Zeroing Reference Buffer Setting is enabled
+ * @has_vref:		Does the ADC has an internal voltage reference?
+ */
+struct mcp3564_state {
+	const struct mcp3564_chip_info	*chip_info;
+	struct spi_device		*spi;
+	struct regulator		*vref;
+	unsigned short			vref_mv;
+	struct mutex			lock; /* Synchronize access to driver's state members */
+	u8				dev_addr;
+	enum mcp3564_oversampling	oversampling;
+	unsigned int			hwgain;
+	unsigned int			scale_tbls[MCP3564_MAX_PGA][2];
+	int				calib_bias;
+	int				calib_scale;
+	unsigned int			current_boost_mode;
+	enum mcp3564_burnout		burnout_mode;
+	bool				auto_zeroing_mux;
+	bool				auto_zeroing_ref;
+	bool				has_vref;
+};
+
+static inline u8 mcp3564_cmd_write(u8 chip_addr, u8 reg)
+{
+	return MCP3564_CMD_HW_ADDR_SET(chip_addr) | MCP3564_CMD_ADDR_SET(reg) | BIT(1);
+}
+
+static inline u8 mcp3564_cmd_read(u8 chip_addr, u8 reg)
+{
+	return MCP3564_CMD_HW_ADDR_SET(chip_addr) | MCP3564_CMD_ADDR_SET(reg) | BIT(0);
+}
+
+static int mcp3564_read_8bits(struct mcp3564_state *adc, u8 reg, u8 *val)
+{
+	int ret;
+	u8 tx_buf;
+	u8 rx_buf;
+
+	tx_buf = mcp3564_cmd_read(adc->dev_addr, reg);
+
+	ret = spi_write_then_read(adc->spi, &tx_buf, sizeof(tx_buf),
+				  &rx_buf, sizeof(rx_buf));
+	*val = rx_buf;
+
+	return ret;
+}
+
+static int mcp3564_read_16bits(struct mcp3564_state *adc, u8 reg, u16 *val)
+{
+	int ret;
+	u8 tx_buf;
+	u8 rx_buf[2];
+
+	tx_buf = mcp3564_cmd_read(adc->dev_addr, reg);
+
+	ret = spi_write_then_read(adc->spi, &tx_buf, sizeof(tx_buf),
+				  rx_buf, sizeof(rx_buf));
+	*val = get_unaligned_be16(rx_buf);
+
+	return ret;
+}
+
+static int mcp3564_read_32bits(struct mcp3564_state *adc, u8 reg, u32 *val)
+{
+	int ret;
+	u8 tx_buf;
+	u8 rx_buf[4];
+
+	tx_buf = mcp3564_cmd_read(adc->dev_addr, reg);
+
+	ret = spi_write_then_read(adc->spi, &tx_buf, sizeof(tx_buf),
+				  rx_buf, sizeof(rx_buf));
+	*val = get_unaligned_be32(rx_buf);
+
+	return ret;
+}
+
+static int mcp3564_write_8bits(struct mcp3564_state *adc, u8 reg, u8 val)
+{
+	u8 tmp;
+	u8 tx_buf[2];
+
+	tx_buf[0] = mcp3564_cmd_write(adc->dev_addr, reg);
+	tx_buf[1] = val;
+
+	return spi_write_then_read(adc->spi, tx_buf, sizeof(tx_buf), &tmp, 0);
+}
+
+static int mcp3564_write_24bits(struct mcp3564_state *adc, u8 reg, u32 val)
+{
+	u8 tmp;
+	__be32 val_be;
+
+	val |= (mcp3564_cmd_write(adc->dev_addr, reg) << 24);
+	put_unaligned_be32(val, &val_be);
+
+	return spi_write_then_read(adc->spi, &val_be, sizeof(val_be), &tmp, 0);
+}
+
+static int mcp3564_fast_cmd(struct mcp3564_state *adc, u8 fast_cmd)
+{
+	u8 val;
+	u8 tmp;
+
+	val = MCP3564_CMD_HW_ADDR_SET(adc->dev_addr) | MCP3564_CMD_ADDR_SET(fast_cmd);
+
+	return spi_write_then_read(adc->spi, &val, 1, &tmp, 0);
+}
+
+static int mcp3564_update_8bits(struct mcp3564_state *adc, u8 reg, u32 mask, u8 val)
+{
+	u8 tmp;
+	int ret;
+
+	ret = mcp3564_read_8bits(adc, reg, &tmp);
+	if (ret < 0)
+		return ret;
+
+	val &= mask;
+	val |= tmp & ~mask;
+	ret = mcp3564_write_8bits(adc, reg, val);
+
+	return ret;
+}
+
+static int mcp3564_set_current_boost_mode(struct iio_dev *indio_dev,
+					  const struct iio_chan_spec *chan,
+					  unsigned int mode)
+{
+	struct mcp3564_state *adc = iio_priv(indio_dev);
+	int ret;
+
+	dev_dbg(&indio_dev->dev, "%s: %d\n", __func__, mode);
+
+	mutex_lock(&adc->lock);
+	ret = mcp3564_update_8bits(adc, MCP3564_CONFIG2, MCP3564_BOOST_CURRENT_MASK,
+				   MCP3564_BOOST_CURRENT_SET(mode));
+
+	if (ret)
+		dev_err(&indio_dev->dev, "Failed to configure CONFIG2 register\n");
+	else
+		adc->current_boost_mode = mode;
+
+	mutex_unlock(&adc->lock);
+
+	return ret;
+}
+
+static int mcp3564_get_current_boost_mode(struct iio_dev *indio_dev,
+					  const struct iio_chan_spec *chan)
+{
+	struct mcp3564_state *adc = iio_priv(indio_dev);
+
+	return adc->current_boost_mode;
+}
+
+static const struct iio_enum mcp3564_current_boost_mode_enum = {
+	.items = mcp3564_boost_current_avail,
+	.num_items = ARRAY_SIZE(mcp3564_boost_current_avail),
+	.set = mcp3564_set_current_boost_mode,
+	.get = mcp3564_get_current_boost_mode,
+};
+
+static const struct iio_chan_spec_ext_info mcp3564_ext_info[] = {
+	IIO_ENUM("boost_current", IIO_SHARED_BY_ALL, &mcp3564_current_boost_mode_enum),
+	{
+		.name = "boost_current_available",
+		.shared = IIO_SHARED_BY_ALL,
+		.read = iio_enum_available_read,
+		.private = (uintptr_t)&mcp3564_current_boost_mode_enum,
+	},
+	{}
+};
+
+static ssize_t mcp3564_auto_zeroing_mux_show(struct device *dev,
+					     struct device_attribute *attr,
+					     char *buf)
+{
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+	struct mcp3564_state *adc = iio_priv(indio_dev);
+
+	return sysfs_emit(buf, "%d\n", adc->auto_zeroing_mux);
+}
+
+static ssize_t mcp3564_auto_zeroing_mux_store(struct device *dev,
+					      struct device_attribute *attr,
+					      const char *buf, size_t len)
+{
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+	struct mcp3564_state *adc = iio_priv(indio_dev);
+	bool auto_zero;
+	int ret;
+
+	ret = kstrtobool(buf, &auto_zero);
+	if (ret)
+		return ret;
+
+	mutex_lock(&adc->lock);
+	ret = mcp3564_update_8bits(adc, MCP3564_CONFIG2, MCP3564_AZ_MUX_MASK,
+				   MCP3564_AZ_MUX_SET(auto_zero));
+
+	if (ret)
+		dev_err(&indio_dev->dev, "Failed to update CONFIG2 register\n");
+	else
+		adc->auto_zeroing_mux = auto_zero;
+
+	mutex_unlock(&adc->lock);
+
+	return ret ? ret : len;
+}
+
+static ssize_t mcp3564_auto_zeroing_ref_show(struct device *dev,
+					     struct device_attribute *attr,
+					     char *buf)
+{
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+	struct mcp3564_state *adc = iio_priv(indio_dev);
+
+	return sysfs_emit(buf, "%d\n", adc->auto_zeroing_ref);
+}
+
+static ssize_t mcp3564_auto_zeroing_ref_store(struct device *dev,
+					      struct device_attribute *attr,
+					      const char *buf, size_t len)
+{
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+	struct mcp3564_state *adc = iio_priv(indio_dev);
+	bool auto_zero;
+	int ret;
+
+	ret = kstrtobool(buf, &auto_zero);
+	if (ret)
+		return ret;
+
+	mutex_lock(&adc->lock);
+	ret = mcp3564_update_8bits(adc, MCP3564_CONFIG2, MCP3564_AZ_REF_MASK,
+				   MCP3564_AZ_REF_SET(auto_zero));
+
+	if (ret)
+		dev_err(&indio_dev->dev, "Failed to update CONFIG2 register\n");
+	else
+		adc->auto_zeroing_ref = auto_zero;
+
+	mutex_unlock(&adc->lock);
+
+	return ret ? ret : len;
+}
+
+static const struct iio_chan_spec mcp3564_channel_template = {
+	.type = IIO_VOLTAGE,
+	.indexed = 1,
+	.differential = 1,
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+	.info_mask_shared_by_all  = BIT(IIO_CHAN_INFO_SCALE)		|
+				BIT(IIO_CHAN_INFO_CALIBSCALE)		|
+				BIT(IIO_CHAN_INFO_CALIBBIAS)		|
+				BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO),
+	.info_mask_shared_by_all_available = BIT(IIO_CHAN_INFO_SCALE)	|
+				BIT(IIO_CHAN_INFO_CALIBSCALE) |
+				BIT(IIO_CHAN_INFO_CALIBBIAS)		|
+				BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO),
+	.ext_info = mcp3564_ext_info,
+	.scan_type = {
+		.sign = 's',
+		.storagebits = 32,
+		.endianness = IIO_BE,
+	},
+};
+
+static const struct iio_chan_spec mcp3564_temp_channel_template = {
+	.type = IIO_TEMP,
+	.channel = 0,
+	.address = ((MCP3564_TEMP_DIODE_P << 4) | MCP3564_TEMP_DIODE_M),
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+	.info_mask_shared_by_all  = BIT(IIO_CHAN_INFO_SCALE)		|
+			BIT(IIO_CHAN_INFO_CALIBSCALE)			|
+			BIT(IIO_CHAN_INFO_CALIBBIAS)			|
+			BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO),
+	.info_mask_shared_by_all_available = BIT(IIO_CHAN_INFO_SCALE)	|
+			BIT(IIO_CHAN_INFO_CALIBSCALE) |
+			BIT(IIO_CHAN_INFO_CALIBBIAS)			|
+			BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO),
+	.scan_type = {
+		.sign = 'u',
+		.storagebits = 32,
+		.endianness = IIO_BE,
+	},
+};
+
+static const struct iio_chan_spec mcp3564_burnout_channel_template = {
+	.extend_name = "burnout",
+	.type = IIO_CURRENT,
+	.output = true,
+	.channel = 0,
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+	.info_mask_separate_available = BIT(IIO_CHAN_INFO_RAW),
+};
+
+static const struct mcp3564_chip_info mcp3564_chip_infos_tbl[] = {
+	[mcp3461] = {
+		.name = "mcp3461",
+		.num_channels = 6,
+		.resolution = 16,
+	},
+	[mcp3462] = {
+		.name = "mcp3462",
+		.num_channels = 18,
+		.resolution = 16,
+	},
+	[mcp3464] = {
+		.name = "mcp3464",
+		.num_channels = 66,
+		.resolution = 16,
+	},
+	[mcp3561] = {
+		.name = "mcp3561",
+		.num_channels = 6,
+		.resolution = 24,
+	},
+	[mcp3562] = {
+		.name = "mcp3562",
+		.num_channels = 18,
+		.resolution = 24,
+	},
+	[mcp3564] = {
+		.name = "mcp3564",
+		.num_channels = 66,
+		.resolution = 24,
+	},
+	[mcp3461r] = {
+		.name = "mcp3461r",
+		.num_channels = 6,
+		.resolution = 16,
+	},
+	[mcp3462r] = {
+		.name = "mcp3462r",
+		.num_channels = 18,
+		.resolution = 16,
+	},
+	[mcp3464r] = {
+		.name = "mcp3464r",
+		.num_channels = 66,
+		.resolution = 16,
+	},
+	[mcp3561r] = {
+		.name = "mcp3561r",
+		.num_channels = 6,
+		.resolution = 24,
+	},
+	[mcp3562r] = {
+		.name = "mcp3562r",
+		.num_channels = 18,
+		.resolution = 24,
+	},
+	[mcp3564r] = {
+		.name = "mcp3564r",
+		.num_channels = 66,
+		.resolution = 24,
+	},
+};
+
+static int mcp3564_read_single_value(struct iio_dev *indio_dev,
+				     struct iio_chan_spec const *channel,
+				     int *val)
+{
+	struct mcp3564_state *adc = iio_priv(indio_dev);
+	int ret;
+	u8 tmp;
+	int ret_read = 0;
+
+	ret = mcp3564_write_8bits(adc, MCP3564_MUX, channel->address);
+	if (ret)
+		return ret;
+
+	/* Start ADC Conversion using fast command (overwrites ADC_MODE[1:0] = 11) */
+	ret = mcp3564_fast_cmd(adc, MCP3564_FASTCMD_START);
+	if (ret)
+		return ret;
+
+	/*
+	 * Check if the conversion is ready. If not, wait a little bit, and
+	 * in case of timeout exit with an error.
+	 */
+	ret = read_poll_timeout(mcp3564_read_8bits, ret_read,
+				ret_read || !(tmp & MCP3564_DATA_READY_MASK),
+				20000, MCP3564_DATA_READY_TIMEOUT_MS * 1000, true,
+				adc, MCP3564_IRQ, &tmp);
+
+	/* failed to read status register */
+	if (ret_read)
+		return ret;
+
+	if (ret)
+		return -ETIMEDOUT;
+
+	if (tmp & MCP3564_DATA_READY_MASK)
+		/* failing to finish conversion */
+		return -EBUSY;
+
+	ret = mcp3564_read_32bits(adc, MCP3564_ADCDATA, val);
+
+	return ret;
+}
+
+static int mcp3564_read_avail(struct iio_dev *indio_dev,
+			      struct iio_chan_spec const *channel,
+			      const int **vals, int *type,
+			      int *length, long mask)
+{
+	struct mcp3564_state *adc = iio_priv(indio_dev);
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		if (channel->output) {
+			*vals = mcp3564_burnout_avail[0];
+			*length = ARRAY_SIZE(mcp3564_burnout_avail) * 2;
+			*type = IIO_VAL_INT_PLUS_MICRO;
+			return IIO_AVAIL_LIST;
+		}
+		return -EINVAL;
+	case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
+		*vals = mcp3564_oversampling_avail;
+		*length = ARRAY_SIZE(mcp3564_oversampling_avail);
+		*type = IIO_VAL_INT;
+		return IIO_AVAIL_LIST;
+	case IIO_CHAN_INFO_SCALE:
+		*vals = (int *)adc->scale_tbls;
+		*length = ARRAY_SIZE(adc->scale_tbls) * 2;
+		*type = IIO_VAL_INT_PLUS_NANO;
+		return IIO_AVAIL_LIST;
+	case IIO_CHAN_INFO_CALIBBIAS:
+		*vals = mcp3564_calib_bias;
+		*type = IIO_VAL_INT;
+		return IIO_AVAIL_RANGE;
+	case IIO_CHAN_INFO_CALIBSCALE:
+		*vals = mcp3564_calib_scale;
+		*type = IIO_VAL_INT;
+		return IIO_AVAIL_RANGE;
+	default:
+		return -EINVAL;
+	}
+}
+
+static int mcp3564_read_raw(struct iio_dev *indio_dev,
+			    struct iio_chan_spec const *channel,
+			    int *val, int *val2, long mask)
+{
+	struct mcp3564_state *adc = iio_priv(indio_dev);
+	int ret;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		if (channel->output) {
+			*val = mcp3564_burnout_avail[adc->burnout_mode][0];
+			*val2 = mcp3564_burnout_avail[adc->burnout_mode][1];
+			return IIO_VAL_INT_PLUS_MICRO;
+		}
+
+		ret = mcp3564_read_single_value(indio_dev, channel, val);
+		if (ret)
+			return -EINVAL;
+		else
+			return IIO_VAL_INT;
+	case IIO_CHAN_INFO_SCALE:
+		mutex_lock(&adc->lock);
+		*val = adc->scale_tbls[adc->hwgain][0];
+		*val2 = adc->scale_tbls[adc->hwgain][1];
+		mutex_unlock(&adc->lock);
+		return IIO_VAL_INT_PLUS_NANO;
+	case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
+		*val = mcp3564_oversampling_avail[adc->oversampling];
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_CALIBBIAS:
+		*val = adc->calib_bias;
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_CALIBSCALE:
+		*val = adc->calib_scale;
+		return IIO_VAL_INT;
+	default:
+		return -EINVAL;
+	}
+}
+
+static int mcp3564_write_raw_get_fmt(struct iio_dev *indio_dev,
+				     struct iio_chan_spec const *chan,
+				     long info)
+{
+	switch (info) {
+	case IIO_CHAN_INFO_RAW:
+		return IIO_VAL_INT_PLUS_MICRO;
+	case IIO_CHAN_INFO_CALIBBIAS:
+	case IIO_CHAN_INFO_CALIBSCALE:
+	case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_SCALE:
+		return IIO_VAL_INT_PLUS_NANO;
+	default:
+		return -EINVAL;
+	}
+}
+
+static int mcp3564_write_raw(struct iio_dev *indio_dev,
+			     struct iio_chan_spec const *channel, int val,
+			     int val2, long mask)
+{
+	struct mcp3564_state *adc = iio_priv(indio_dev);
+	int tmp;
+	unsigned int hwgain;
+	enum mcp3564_burnout burnout;
+	int ret = 0;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		if (channel->output) {
+			for (burnout = 0; burnout < MCP3564_MAX_BURNOUT_IDX; burnout++) {
+				if (val == mcp3564_burnout_avail[burnout][0] &&
+				    val2 == mcp3564_burnout_avail[burnout][1])
+					break;
+			}
+
+			if (burnout == MCP3564_MAX_BURNOUT_IDX)
+				return -EINVAL;
+
+			if (burnout == adc->burnout_mode)
+				return ret;
+
+			mutex_lock(&adc->lock);
+			ret = mcp3564_update_8bits(adc, MCP3564_CONFIG0,
+						   MCP3564_CS_SEL_MASK,
+						   MCP3564_CS_SEL_SET(burnout));
+
+			if (ret)
+				dev_err(&indio_dev->dev, "Failed to configure burnout current\n");
+			else
+				adc->burnout_mode = burnout;
+			break;
+		}
+		return -EINVAL;
+	case IIO_CHAN_INFO_CALIBBIAS:
+		if (val < mcp3564_calib_bias[0] && val > mcp3564_calib_bias[2])
+			return -EINVAL;
+
+		mutex_lock(&adc->lock);
+		ret = mcp3564_write_24bits(adc, MCP3564_OFFSETCAL, val);
+		if (!ret)
+			adc->calib_bias = val;
+		break;
+	case IIO_CHAN_INFO_CALIBSCALE:
+		if (val < mcp3564_calib_bias[0] && val > mcp3564_calib_bias[2])
+			return -EINVAL;
+
+		if (adc->calib_scale == val)
+			return ret;
+
+		mutex_lock(&adc->lock);
+		ret = mcp3564_write_24bits(adc, MCP3564_GAINCAL, val);
+		if (!ret)
+			adc->calib_scale = val;
+		break;
+	case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
+		if (val < 0)
+			return -EINVAL;
+
+		tmp = find_closest(val, mcp3564_oversampling_avail,
+				   ARRAY_SIZE(mcp3564_oversampling_avail));
+
+		if (adc->oversampling == tmp)
+			return ret;
+
+		mutex_lock(&adc->lock);
+		ret = mcp3564_update_8bits(adc, MCP3564_CONFIG1, MCP3564_OVERSPL_RATIO_MASK,
+					   MCP3564_OVERSAMPLING_RATIO_SET(adc->oversampling));
+		if (!ret)
+			adc->oversampling = tmp;
+		break;
+	case IIO_CHAN_INFO_SCALE:
+		for (hwgain = 0; hwgain < MCP3564_MAX_PGA; hwgain++) {
+			if (val == adc->scale_tbls[hwgain][0] &&
+			    val2 == adc->scale_tbls[hwgain][1])
+				break;
+		}
+
+		if (hwgain == MCP3564_MAX_PGA)
+			return -EINVAL;
+
+		if (hwgain == adc->hwgain)
+			return ret;
+
+		mutex_lock(&adc->lock);
+		/* Update GAIN in CONFIG2[5:3] -> GAIN[2:0]*/
+		ret = mcp3564_update_8bits(adc, MCP3564_CONFIG2, MCP3564_HARDWARE_GAIN_MASK,
+					   MCP3564_HARDWARE_GAIN_SET(hwgain));
+		if (!ret)
+			adc->hwgain = hwgain;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	mutex_unlock(&adc->lock);
+
+	return ret;
+}
+
+static int mcp3564_parse_fw_children(struct iio_dev *indio_dev)
+{
+	struct mcp3564_state *adc = iio_priv(indio_dev);
+	struct device *dev = &adc->spi->dev;
+	struct iio_chan_spec *channels;
+	struct fwnode_handle *child;
+	struct iio_chan_spec chanspec = mcp3564_channel_template;
+	struct iio_chan_spec temp_chanspec = mcp3564_temp_channel_template;
+	struct iio_chan_spec burnout_chanspec = mcp3564_burnout_channel_template;
+	int chan_idx = 0;
+	unsigned int num_ch;
+	u32 inputs[2];
+	const char *node_name;
+	int ret;
+
+	num_ch = device_get_child_node_count(dev);
+	if (num_ch == 0)
+		return dev_err_probe(&indio_dev->dev, -ENODEV,
+				     "FW has no channels defined\n");
+
+	/* Reserve space for temperature channel and burnout */
+	num_ch += 2;
+
+	if (num_ch > adc->chip_info->num_channels) {
+		return dev_err_probe(dev, -EINVAL, "Too many channels %d > %d\n",
+				     num_ch, adc->chip_info->num_channels);
+	}
+
+	channels = devm_kcalloc(dev, num_ch, sizeof(*channels), GFP_KERNEL);
+	if (!channels)
+		return dev_err_probe(dev, -ENOMEM, "Can't allocate memory\n");
+
+	device_for_each_child_node(dev, child) {
+		node_name = fwnode_get_name(child);
+
+		if (fwnode_property_present(child, "diff-channels")) {
+			ret = fwnode_property_read_u32_array(child,
+							     "diff-channels",
+							     inputs,
+							     ARRAY_SIZE(inputs));
+
+			chanspec.differential = 1;
+			dev_info(dev, "-> %s: diff-channels %d - %d\n",
+				 node_name, inputs[0], inputs[1]);
+		} else {
+			ret = fwnode_property_read_u32(child, "reg", &inputs[0]);
+
+			chanspec.differential = 0;
+			inputs[1] = MCP3564_AGND;
+			dev_info(dev, "-> %s: channel %d - AGND\n", node_name, inputs[0]);
+		}
+		if (ret) {
+			fwnode_handle_put(child);
+			return ret;
+		}
+
+		if (inputs[0] > MCP3564_INTERNAL_VCM ||
+		    inputs[1] > MCP3564_INTERNAL_VCM) {
+			fwnode_handle_put(child);
+			return dev_err_probe(&indio_dev->dev, -EINVAL,
+					     "Channel index > %d, for %s\n",
+					     MCP3564_INTERNAL_VCM + 1,
+					     node_name);
+		}
+
+		chanspec.address = (inputs[0] << 4) | inputs[1];
+		chanspec.channel = inputs[0];
+		chanspec.channel2 = inputs[1];
+		chanspec.scan_type.realbits = adc->chip_info->resolution;
+
+		channels[chan_idx] = chanspec;
+		chan_idx++;
+	}
+
+	/* Add burnout current channel */
+	channels[chan_idx] = burnout_chanspec;
+	chan_idx++;
+
+	/* Add temperature channel */
+	temp_chanspec.scan_type.realbits = adc->chip_info->resolution;
+	channels[chan_idx] = temp_chanspec;
+	chan_idx++;
+
+	indio_dev->num_channels = chan_idx;
+	indio_dev->channels = channels;
+
+	return 0;
+}
+
+static void mcp3564_disable_reg(void *reg)
+{
+	if (reg)
+		regulator_disable(reg);
+}
+
+static void mcp3564_fill_scale_tbls(struct mcp3564_state *adc)
+{
+	unsigned int pow = adc->chip_info->resolution - 1;
+	int ref;
+	unsigned int i;
+	int tmp0, tmp1;
+	u64 tmp2;
+
+	for (i = 0; i < MCP3564_MAX_PGA; i++) {
+		ref = adc->vref_mv;
+		tmp2 = shift_right((u64)ref * NANO, pow);
+		tmp0 = (int)div_u64_rem(tmp2, NANO, &tmp1);
+
+		tmp2 = tmp2 * mcp3564_hwgain_frac[(2 * i) + 1];
+		tmp1 = (int)div_u64(tmp2, mcp3564_hwgain_frac[2 * i]);
+
+		adc->scale_tbls[i][1] = tmp1;
+	}
+}
+
+static int mcp3564_config(struct iio_dev *indio_dev)
+{
+	struct mcp3564_state *adc = iio_priv(indio_dev);
+	struct device *dev = &adc->spi->dev;
+	u8 tmp_reg;
+	u16 tmp_u16;
+	enum mcp3564_ids ids;
+	int ret = 0;
+	unsigned int tmp = 0x01;
+
+	/*
+	 * The address is set on a per-device basis by fuses in the factory,
+	 * configured on request. If not requested, the fuses are set for 0x1.
+	 * The device address is part of the device markings to avoid
+	 * potential confusion. This address is coded on two bits, so four possible
+	 * addresses are available when multiple devices are present on the same
+	 * SPI bus with only one Chip Select line for all devices.
+	 */
+	device_property_read_u32(dev, "microchip,hw-device-address", &tmp);
+
+	if (tmp > 3) {
+		dev_err_probe(dev, tmp,
+			      "invalid device address. Must be in range 0-3.\n");
+		return -EINVAL;
+	}
+
+	adc->dev_addr = 0xff & tmp;
+
+	dev_dbg(dev, "use device address %i\n", adc->dev_addr);
+
+	ret = mcp3564_read_8bits(adc, MCP3564_RESERVED_C, &tmp_reg);
+	if (ret < 0)
+		return ret;
+
+	switch (tmp_reg) {
+	case MCP3564_REG_C_DEFAULT:
+		adc->has_vref = false;
+		break;
+	case MCP3564R_REG_C_DEFAULT:
+		adc->has_vref = true;
+		break;
+	default:
+		dev_err_probe(dev, tmp_reg, "Unknown chip found\n");
+		return -EINVAL;
+	}
+
+	ret = mcp3564_read_16bits(adc, MCP3564_RESERVED_E, &tmp_u16);
+	if (ret < 0)
+		return ret;
+
+	switch (tmp_u16 & MCP3564_HW_ID_MASK) {
+	case MCP3461_HW_ID:
+		if (adc->has_vref)
+			ids = mcp3461r;
+		else
+			ids = mcp3461;
+		break;
+	case MCP3462_HW_ID:
+		if (adc->has_vref)
+			ids = mcp3462r;
+		else
+			ids = mcp3462;
+		break;
+	case MCP3464_HW_ID:
+		if (adc->has_vref)
+			ids = mcp3464r;
+		else
+			ids = mcp3464;
+		break;
+	case MCP3561_HW_ID:
+		if (adc->has_vref)
+			ids = mcp3561r;
+		else
+			ids = mcp3561;
+		break;
+	case MCP3562_HW_ID:
+		if (adc->has_vref)
+			ids = mcp3562r;
+		else
+			ids = mcp3562;
+		break;
+	case MCP3564_HW_ID:
+		if (adc->has_vref)
+			ids = mcp3564r;
+		else
+			ids = mcp3564;
+		break;
+	default:
+		dev_err_probe(dev, tmp_u16, "Unknown chip found\n");
+		return -EINVAL;
+	}
+
+	adc->chip_info = &mcp3564_chip_infos_tbl[ids];
+
+	dev_dbg(dev, "Found %s chip\n", adc->chip_info->name);
+
+	adc->vref = devm_regulator_get_optional(dev, "vref");
+	if (IS_ERR(adc->vref)) {
+		if (PTR_ERR(adc->vref) == -ENODEV) {
+			/* Check if chip has internal vref */
+			if (!adc->has_vref)
+				return dev_err_probe(dev, -EINVAL,
+					     "Unknown Vref\n");
+			adc->vref = NULL;
+			dev_dbg(dev, "%s: Using internal Vref\n", __func__);
+		} else {
+			return dev_err_probe(dev, PTR_ERR(adc->vref),
+					     "failed to get regulator\n");
+		}
+	} else {
+		ret = regulator_enable(adc->vref);
+		if (ret)
+			return ret;
+
+		ret = devm_add_action_or_reset(dev, mcp3564_disable_reg,
+					       adc->vref);
+		if (ret)
+			return ret;
+
+		dev_dbg(dev, "%s: Using External Vref\n", __func__);
+
+		ret = regulator_get_voltage(adc->vref);
+		if (ret < 0) {
+			return dev_err_probe(dev, ret,
+					     "Failed to read vref regulator\n");
+		}
+
+		adc->vref_mv = ret / MILLI;
+	}
+
+	ret = mcp3564_parse_fw_children(indio_dev);
+	if (ret)
+		return ret;
+
+	/*
+	 * Command sequence that ensures a recovery with the desired settings
+	 * in any cases of loss-of-power scenario (Full Chip Reset):
+	 *  - Write LOCK register to 0xA5
+	 *  - Write IRQ register to 0x03
+	 *  - Send "Device Full Reset" fast command
+	 */
+	ret = mcp3564_write_8bits(adc, MCP3564_LOCK, MCP3564_LOCK_WRITE_ACCESS_PASSWORD);
+	if (ret)
+		return ret;
+
+	ret = mcp3564_write_8bits(adc, MCP3564_IRQ, 0x03);
+	if (ret)
+		return ret;
+
+	ret = mcp3564_fast_cmd(adc, MCP3564_FASTCMD_RESET);
+	if (ret)
+		return ret;
+
+	mdelay(1);
+
+	/* set a gain of 1x for GAINCAL */
+	ret = mcp3564_write_24bits(adc, MCP3564_GAINCAL,
+				   MCP3564_GAINCAL_SET(MCP3564_DEFAULT_GAINCAL));
+	if (ret)
+		return ret;
+
+	adc->calib_scale = MCP3564_GAINCAL_SET(MCP3564_DEFAULT_GAINCAL);
+
+	ret = mcp3564_write_24bits(adc, MCP3564_OFFSETCAL,
+				   MCP3564_OFFSETCAL_SET(MCP3564_DEFAULT_OFFSETCAL));
+	if (ret)
+		return ret;
+
+	ret = mcp3564_write_24bits(adc, MCP3564_TIMER,
+				   MCP3564_TIMER_SET(MCP3564_TIMER_DEFAULT_VALUE));
+	if (ret)
+		return ret;
+
+	ret = mcp3564_write_24bits(adc, MCP3564_SCAN,
+				   MCP3564_DELAY_TIME_SET(MCP3564_NO_DELAY) |
+				   MCP3564_SCAN_CH_SEL_SET(MCP3564_SCAN_DEFAULT_VALUE));
+	if (ret)
+		return ret;
+
+	ret = mcp3564_write_8bits(adc, MCP3564_MUX, MCP3564_MUX_SET(MCP3564_CH0, MCP3564_CH1));
+	if (ret)
+		return ret;
+
+	ret = mcp3564_write_8bits(adc, MCP3564_IRQ, MCP3464_EN_FASTCMD | MCP3464_EN_STP);
+	if (ret)
+		return ret;
+
+	tmp_reg = MCP3564_CONV_MODE_SET(MCP3464_CONV_MODE_ONE_SHOT_STANDBY);
+	tmp_reg |= MCP3564_DATA_FORMAT_SET(MCP3456_DATA_FORMAT_32B_SGN_EXT);
+	tmp_reg |= MCP3464_EN_OFFCAL;
+	tmp_reg |= MCP3464_EN_GAINCAL;
+
+	ret = mcp3564_write_8bits(adc, MCP3564_CONFIG3, tmp_reg);
+	if (ret)
+		return ret;
+
+	tmp_reg = MCP3564_BOOST_CURRENT_SET(MCP3564_BOOST_CURRENT_x1_00);
+	tmp_reg |= MCP3564_HARDWARE_GAIN_SET(0x01);
+	tmp_reg |= MCP3564_AZ_MUX_SET(1);
+
+	ret = mcp3564_write_8bits(adc, MCP3564_CONFIG2, tmp_reg);
+	if (ret)
+		return ret;
+
+	adc->hwgain = 0x01;
+	adc->auto_zeroing_mux = true;
+	adc->auto_zeroing_ref = false;
+	adc->current_boost_mode = MCP3564_BOOST_CURRENT_x1_00;
+
+	tmp_reg = MCP3564_OVERSAMPLING_RATIO_SET(MCP3564_OVERSAMPLING_RATIO_98304);
+
+	ret = mcp3564_write_8bits(adc, MCP3564_CONFIG1, tmp_reg);
+	if (ret)
+		return ret;
+
+	adc->oversampling = MCP3564_OVERSAMPLING_RATIO_98304;
+
+	tmp_reg = MCP3564_ADC_MODE_MASK_SET(MCP3564_ADC_MODE_STANDBY);
+	tmp_reg |= MCP3564_CS_SEL_SET(MCP3564_CS_SEL_0_0_uA);
+	tmp_reg |= MCP3564_CLK_SEL_SET(MCP3564_USE_INTERNAL_CLK);
+	tmp_reg |= MCP3456_CONFIG0_BIT6_DEFAULT;
+
+	if (!adc->vref) {
+		tmp_reg |= MCP3564_VREF_SET(1);
+		adc->vref_mv = MCP3564R_INT_VREF_MV;
+	}
+
+	ret = mcp3564_write_8bits(adc, MCP3564_CONFIG0, tmp_reg);
+
+	adc->burnout_mode = MCP3564_CS_SEL_0_0_uA;
+
+	return ret;
+}
+
+static IIO_DEVICE_ATTR(enable_auto_zeroing_ref, 0644,
+		       mcp3564_auto_zeroing_ref_show,
+		       mcp3564_auto_zeroing_ref_store, 0);
+
+static IIO_DEVICE_ATTR(enable_auto_zeroing_mux, 0644,
+		       mcp3564_auto_zeroing_mux_show,
+		       mcp3564_auto_zeroing_mux_store, 0);
+
+static struct attribute *mcp3564_attributes[] = {
+	MCP3564_DEV_ATTR(enable_auto_zeroing_mux),
+	NULL
+};
+
+static struct attribute *mcp3564r_attributes[] = {
+	MCP3564_DEV_ATTR(enable_auto_zeroing_mux),
+	MCP3564_DEV_ATTR(enable_auto_zeroing_ref),
+	NULL
+};
+
+static struct attribute_group mcp3564_attribute_group = {
+	.attrs = mcp3564_attributes,
+};
+
+static struct attribute_group mcp3564r_attribute_group = {
+	.attrs = mcp3564r_attributes,
+};
+
+static const struct iio_info mcp3564_info = {
+	.read_raw = mcp3564_read_raw,
+	.read_avail = mcp3564_read_avail,
+	.write_raw = mcp3564_write_raw,
+	.write_raw_get_fmt = mcp3564_write_raw_get_fmt,
+	.attrs = &mcp3564_attribute_group,
+};
+
+static const struct iio_info mcp3564r_info = {
+	.read_raw = mcp3564_read_raw,
+	.read_avail = mcp3564_read_avail,
+	.write_raw = mcp3564_write_raw,
+	.write_raw_get_fmt = mcp3564_write_raw_get_fmt,
+	.attrs = &mcp3564r_attribute_group,
+};
+
+static int mcp3564_probe(struct spi_device *spi)
+{
+	int ret;
+	struct iio_dev *indio_dev;
+	struct mcp3564_state *adc;
+
+	indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*adc));
+	if (!indio_dev) {
+		dev_err_probe(&indio_dev->dev, PTR_ERR(indio_dev),
+			      "Can't allocate iio device\n");
+		return -ENOMEM;
+	}
+
+	adc = iio_priv(indio_dev);
+	adc->spi = spi;
+
+	dev_dbg(&spi->dev, "%s: probe(spi = 0x%p)\n", __func__, spi);
+
+	/*
+	 * Do any chip specific initialization, e.g:
+	 * read/write some registers
+	 * enable/disable certain channels
+	 * change the sampling rate to the requested value
+	 */
+	ret = mcp3564_config(indio_dev);
+	if (ret) {
+		return dev_err_probe(&spi->dev, ret,
+				     "Can't configure MCP356X device\n");
+	}
+
+	dev_dbg(&spi->dev, "%s: Vref (mV): %d\n", __func__, adc->vref_mv);
+
+	mcp3564_fill_scale_tbls(adc);
+
+	indio_dev->name = adc->chip_info->name;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+
+	if (adc->has_vref)
+		indio_dev->info = &mcp3564r_info;
+	else
+		indio_dev->info = &mcp3564_info;
+
+	mutex_init(&adc->lock);
+
+	ret = devm_iio_device_register(&spi->dev, indio_dev);
+	if (ret) {
+		return dev_err_probe(&spi->dev, ret,
+				     "Can't register IIO device\n");
+	}
+
+	return 0;
+}
+
+static const struct of_device_id mcp3564_dt_ids[] = {
+	{ .compatible = "microchip,mcp3461", .data = &mcp3564_chip_infos_tbl[mcp3461] },
+	{ .compatible = "microchip,mcp3462", .data = &mcp3564_chip_infos_tbl[mcp3462] },
+	{ .compatible = "microchip,mcp3464", .data = &mcp3564_chip_infos_tbl[mcp3464] },
+	{ .compatible = "microchip,mcp3561", .data = &mcp3564_chip_infos_tbl[mcp3561] },
+	{ .compatible = "microchip,mcp3562", .data = &mcp3564_chip_infos_tbl[mcp3562] },
+	{ .compatible = "microchip,mcp3564", .data = &mcp3564_chip_infos_tbl[mcp3564] },
+	{ .compatible = "microchip,mcp3461r", .data = &mcp3564_chip_infos_tbl[mcp3461r] },
+	{ .compatible = "microchip,mcp3462r", .data = &mcp3564_chip_infos_tbl[mcp3462r] },
+	{ .compatible = "microchip,mcp3464r", .data = &mcp3564_chip_infos_tbl[mcp3464r] },
+	{ .compatible = "microchip,mcp3561r", .data = &mcp3564_chip_infos_tbl[mcp3561r] },
+	{ .compatible = "microchip,mcp3562r", .data = &mcp3564_chip_infos_tbl[mcp3562r] },
+	{ .compatible = "microchip,mcp3564r", .data = &mcp3564_chip_infos_tbl[mcp3564r] },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, mcp3564_dt_ids);
+
+static const struct spi_device_id mcp3564_id[] = {
+	{ "mcp3461", (kernel_ulong_t)&mcp3564_chip_infos_tbl[mcp3461] },
+	{ "mcp3462", (kernel_ulong_t)&mcp3564_chip_infos_tbl[mcp3462] },
+	{ "mcp3464", (kernel_ulong_t)&mcp3564_chip_infos_tbl[mcp3464] },
+	{ "mcp3561", (kernel_ulong_t)&mcp3564_chip_infos_tbl[mcp3561] },
+	{ "mcp3562", (kernel_ulong_t)&mcp3564_chip_infos_tbl[mcp3562] },
+	{ "mcp3564", (kernel_ulong_t)&mcp3564_chip_infos_tbl[mcp3564] },
+	{ "mcp3461r", (kernel_ulong_t)&mcp3564_chip_infos_tbl[mcp3461r] },
+	{ "mcp3462r", (kernel_ulong_t)&mcp3564_chip_infos_tbl[mcp3462r] },
+	{ "mcp3464r", (kernel_ulong_t)&mcp3564_chip_infos_tbl[mcp3464r] },
+	{ "mcp3561r", (kernel_ulong_t)&mcp3564_chip_infos_tbl[mcp3561r] },
+	{ "mcp3562r", (kernel_ulong_t)&mcp3564_chip_infos_tbl[mcp3562r] },
+	{ "mcp3564r", (kernel_ulong_t)&mcp3564_chip_infos_tbl[mcp3564r] },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(spi, mcp3564_id);
+
+static struct spi_driver mcp3564_driver = {
+	.driver = {
+		.name = "mcp3564",
+		.of_match_table = mcp3564_dt_ids,
+	},
+	.probe = mcp3564_probe,
+	.id_table = mcp3564_id,
+};
+
+module_spi_driver(mcp3564_driver);
+
+MODULE_AUTHOR("Marius Cristea <marius.cristea@microchip.com>");
+MODULE_DESCRIPTION("Microchip MCP346x/MCP346xR and MCP356x/MCP346xR ADCs");
+MODULE_LICENSE("GPL v2");