@@ -297,36 +297,27 @@ static int spear_adc_probe(struct platform_device *pdev)
st->adc_base_spear3xx =
(struct adc_regs_spear3xx __iomem *)st->adc_base_spear6xx;
- st->clk = devm_clk_get(dev, NULL);
+ st->clk = devm_clk_get_enabled(dev, NULL);
if (IS_ERR(st->clk)) {
- dev_err(dev, "failed getting clock\n");
- return PTR_ERR(st->clk);
- }
-
- ret = clk_prepare_enable(st->clk);
- if (ret) {
dev_err(dev, "failed enabling clock\n");
- return ret;
+ return PTR_ERR(st->clk);
}
irq = platform_get_irq(pdev, 0);
- if (irq < 0) {
- ret = irq;
- goto errout2;
- }
+ if (irq < 0)
+ return irq;
ret = devm_request_irq(dev, irq, spear_adc_isr, 0, SPEAR_ADC_MOD_NAME,
st);
if (ret < 0) {
dev_err(dev, "failed requesting interrupt\n");
- goto errout2;
+ return ret;
}
if (of_property_read_u32(np, "sampling-frequency",
&st->sampling_freq)) {
dev_err(dev, "sampling-frequency missing in DT\n");
- ret = -EINVAL;
- goto errout2;
+ return -EINVAL;
}
/*
@@ -343,8 +334,6 @@ static int spear_adc_probe(struct platform_device *pdev)
spear_adc_configure(st);
- platform_set_drvdata(pdev, indio_dev);
-
init_completion(&st->completion);
indio_dev->name = SPEAR_ADC_MOD_NAME;
@@ -353,27 +342,12 @@ static int spear_adc_probe(struct platform_device *pdev)
indio_dev->channels = spear_adc_iio_channels;
indio_dev->num_channels = ARRAY_SIZE(spear_adc_iio_channels);
- ret = iio_device_register(indio_dev);
+ ret = devm_iio_device_register(dev, indio_dev);
if (ret)
- goto errout2;
+ return ret;
dev_info(dev, "SPEAR ADC driver loaded, IRQ %d\n", irq);
- return 0;
-
-errout2:
- clk_disable_unprepare(st->clk);
- return ret;
-}
-
-static int spear_adc_remove(struct platform_device *pdev)
-{
- struct iio_dev *indio_dev = platform_get_drvdata(pdev);
- struct spear_adc_state *st = iio_priv(indio_dev);
-
- iio_device_unregister(indio_dev);
- clk_disable_unprepare(st->clk);
-
return 0;
}
@@ -387,7 +361,6 @@ MODULE_DEVICE_TABLE(of, spear_adc_dt_ids);
static struct platform_driver spear_adc_driver = {
.probe = spear_adc_probe,
- .remove = spear_adc_remove,
.driver = {
.name = SPEAR_ADC_MOD_NAME,
.of_match_table = of_match_ptr(spear_adc_dt_ids),
The devm_clk_get_enabled() helper: - calls devm_clk_get() - calls clk_prepare_enable() and registers what is needed in order to call clk_disable_unprepare() when needed, as a managed resource. Switch to devm_iio_device_register() and drop the remove function. This simplifies the code. Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Suggested-by: Jonathan Cameron <jic23@kernel.org> --- v2: - Also switch to devm_iio_device_register() and drop the remove function. --- drivers/iio/adc/spear_adc.c | 43 +++++++------------------------------ 1 file changed, 8 insertions(+), 35 deletions(-)