From patchwork Sun Aug 27 00:59:03 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Dmitry Baryshkov X-Patchwork-Id: 13366715 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 0F4DACA0FED for ; Sun, 27 Aug 2023 01:01:03 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S230202AbjH0BAK (ORCPT ); Sat, 26 Aug 2023 21:00:10 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:48924 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S230099AbjH0A7r (ORCPT ); Sat, 26 Aug 2023 20:59:47 -0400 Received: from mail-lf1-x133.google.com (mail-lf1-x133.google.com [IPv6:2a00:1450:4864:20::133]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id DBCF2F7 for ; Sat, 26 Aug 2023 17:59:44 -0700 (PDT) Received: by mail-lf1-x133.google.com with SMTP id 2adb3069b0e04-50078eba7afso3335140e87.0 for ; Sat, 26 Aug 2023 17:59:44 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; t=1693097983; x=1693702783; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:from:to:cc:subject:date :message-id:reply-to; bh=YOijttIhX4pC24Tx4gkoYM4fEkA3UENDYI9aQrNhx68=; b=AUQpmBlA9PoFcShRs85XYC/t7pQV8a0sOlQUQyYzhOTQrbJlPBLUAaWJBVEXTd7rWo WhnzuRjNAyu79uBZiKj11cXIHeC9iP3LYZeWAebRfsVN9lANr8vgi4YX4rTDZlSxo48P i/Et4gKURwHXBWgcIzFGDUXxMJto520+696lE1EKQM4am7Gj+dddALp71yGDMrP74/jc PyACZlQEeerluwnpW2uFSkEdrO208IejyAHghCpU/pMkti7iXoiKY1ID9ITX2IA4Nb9U nwudJdFBGHEA2ni04Blm5EXkyQroKSE8N964t2+/o6gwHoMbawI2jsi+wY5P3Z74yRqE wt3A== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20221208; t=1693097983; x=1693702783; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=YOijttIhX4pC24Tx4gkoYM4fEkA3UENDYI9aQrNhx68=; b=gmQ6vchbHMk3ekRR5bpNdFdl4X6OjPBAwleGGX7zpLYMxEOEvf/B8hURd6uBXyu6pG 9YjzqnuNracZoq7dRng2VrhkXpvK+8dF67c5GlW7HBcjZHH905HtwTda3tmDMS1bWPDP 02YY6SpTvXyN4eXbUvrIDJtBfgzOwqQupTTYCS/XEBdZ0q3Itei0CkCMdDJtQtmVrnA7 kiEB+tlK/tdRGrI7PgQnNjEKrd4NOJcYKhV1RqycDmKFsMKS3Q8yY/ls34WI50VVQRAw XAdIjTKj/tQpT1jkeG148TFFuatHRHXpXpiuH+IMI073vP/OdkYh6h8/rxULe+DChwsm 1jpw== X-Gm-Message-State: AOJu0YyORWgBNSDc+RuPrPDvwWTRbylb8MNdiPxKv82unZc7KPGIhbYj 1jmvBVFHdXPvhiZG9quDOroipA== X-Google-Smtp-Source: AGHT+IHJ5NHnPub1MVJVG912s0zf6y75FP6S7cfNzxrZUzy/Bp8gOwZbdltvGv+jaxAgHXKQt6Ck0Q== X-Received: by 2002:a05:6512:4012:b0:4fe:8ba9:4c4 with SMTP id br18-20020a056512401200b004fe8ba904c4mr19779764lfb.59.1693097983197; Sat, 26 Aug 2023 17:59:43 -0700 (PDT) Received: from umbar.unikie.fi ([192.130.178.91]) by smtp.gmail.com with ESMTPSA id p18-20020ac246d2000000b00500a08e42e7sm917729lfo.124.2023.08.26.17.59.41 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Sat, 26 Aug 2023 17:59:42 -0700 (PDT) From: Dmitry Baryshkov To: devicetree@vger.kernel.org, Lee Jones , Rob Herring , Krzysztof Kozlowski Cc: Andy Gross , Bjorn Andersson , Konrad Dybcio , linux-arm-msm@vger.kernel.org, Jonathan Cameron , Lars-Peter Clausen , linux-iio@vger.kernel.org, Dmitry Torokhov , linux-input@vger.kernel.org, Pavel Machek , linux-leds@vger.kernel.org Subject: [PATCH v4 21/38] ARM: dts: qcom: msm8660: split PMIC to separate dtsi files Date: Sun, 27 Aug 2023 03:59:03 +0300 Message-Id: <20230827005920.898719-22-dmitry.baryshkov@linaro.org> X-Mailer: git-send-email 2.39.2 In-Reply-To: <20230827005920.898719-1-dmitry.baryshkov@linaro.org> References: <20230827005920.898719-1-dmitry.baryshkov@linaro.org> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-iio@vger.kernel.org The PMIC is not a part of the SoC, so move PMIC to a separate file and include it from the board files. Suggested-by: Konrad Dybcio Acked-by: Konrad Dybcio Signed-off-by: Dmitry Baryshkov --- arch/arm/boot/dts/qcom/pm8058.dtsi | 160 ++++++++++++++++++ .../dts/qcom/qcom-apq8060-dragonboard.dts | 1 + arch/arm/boot/dts/qcom/qcom-msm8660-surf.dts | 1 + arch/arm/boot/dts/qcom/qcom-msm8660.dtsi | 149 +--------------- 4 files changed, 163 insertions(+), 148 deletions(-) create mode 100644 arch/arm/boot/dts/qcom/pm8058.dtsi diff --git a/arch/arm/boot/dts/qcom/pm8058.dtsi b/arch/arm/boot/dts/qcom/pm8058.dtsi new file mode 100644 index 000000000000..ad581c3bcbd2 --- /dev/null +++ b/arch/arm/boot/dts/qcom/pm8058.dtsi @@ -0,0 +1,160 @@ +// SPDX-License-Identifier: GPL-2.0 + +&ssbi { + pm8058: pmic { + compatible = "qcom,pm8058"; + #interrupt-cells = <2>; + interrupt-controller; + #address-cells = <1>; + #size-cells = <0>; + + pm8058_gpio: gpio@150 { + compatible = "qcom,pm8058-gpio", + "qcom,ssbi-gpio"; + reg = <0x150>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + gpio-ranges = <&pm8058_gpio 0 0 44>; + #gpio-cells = <2>; + }; + + pm8058_mpps: mpps@50 { + compatible = "qcom,pm8058-mpp", + "qcom,ssbi-mpp"; + reg = <0x50>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pm8058_mpps 0 0 12>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pwrkey@1c { + compatible = "qcom,pm8058-pwrkey"; + reg = <0x1c>; + interrupt-parent = <&pm8058>; + interrupts = <50 1>, <51 1>; + debounce = <15625>; + pull-up; + }; + + pm8058_keypad: keypad@148 { + compatible = "qcom,pm8058-keypad"; + reg = <0x148>; + interrupt-parent = <&pm8058>; + interrupts = <74 1>, <75 1>; + debounce = <15>; + scan-delay = <32>; + row-hold = <91500>; + }; + + pm8058_xoadc: xoadc@197 { + compatible = "qcom,pm8058-adc"; + reg = <0x197>; + interrupts-extended = <&pm8058 76 IRQ_TYPE_EDGE_RISING>; + #address-cells = <2>; + #size-cells = <0>; + #io-channel-cells = <2>; + + vcoin: adc-channel@0 { + reg = <0x00 0x00>; + }; + + vbat: adc-channel@1 { + reg = <0x00 0x01>; + }; + + dcin: adc-channel@2 { + reg = <0x00 0x02>; + }; + + ichg: adc-channel@3 { + reg = <0x00 0x03>; + }; + + vph_pwr: adc-channel@4 { + reg = <0x00 0x04>; + }; + + usb_vbus: adc-channel@a { + reg = <0x00 0x0a>; + }; + + die_temp: adc-channel@b { + reg = <0x00 0x0b>; + }; + + ref_625mv: adc-channel@c { + reg = <0x00 0x0c>; + }; + + ref_1250mv: adc-channel@d { + reg = <0x00 0x0d>; + }; + + ref_325mv: adc-channel@e { + reg = <0x00 0x0e>; + }; + + ref_muxoff: adc-channel@f { + reg = <0x00 0x0f>; + }; + }; + + rtc@1e8 { + compatible = "qcom,pm8058-rtc"; + reg = <0x1e8>; + interrupt-parent = <&pm8058>; + interrupts = <39 1>; + allow-set-time; + }; + + vibrator@4a { + compatible = "qcom,pm8058-vib"; + reg = <0x4a>; + }; + + pm8058_led48: led@48 { + compatible = "qcom,pm8058-keypad-led"; + reg = <0x48>; + status = "disabled"; + }; + + pm8058_led131: led@131 { + compatible = "qcom,pm8058-led"; + reg = <0x131>; + status = "disabled"; + }; + + pm8058_led132: led@132 { + compatible = "qcom,pm8058-led"; + reg = <0x132>; + status = "disabled"; + }; + + pm8058_led133: led@133 { + compatible = "qcom,pm8058-led"; + reg = <0x133>; + status = "disabled"; + }; + }; +}; + +/ { + /* + * These channels from the ADC are simply hardware monitors. + * That is why the ADC is referred to as "HKADC" - HouseKeeping + * ADC. + */ + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&pm8058_xoadc 0x00 0x01>, /* Battery */ + <&pm8058_xoadc 0x00 0x02>, /* DC in (charger) */ + <&pm8058_xoadc 0x00 0x04>, /* VPH the main system voltage */ + <&pm8058_xoadc 0x00 0x0b>, /* Die temperature */ + <&pm8058_xoadc 0x00 0x0c>, /* Reference voltage 1.25V */ + <&pm8058_xoadc 0x00 0x0d>, /* Reference voltage 0.625V */ + <&pm8058_xoadc 0x00 0x0e>; /* Reference voltage 0.325V */ + }; +}; diff --git a/arch/arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts b/arch/arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts index e4261d729d35..10b8f529c337 100644 --- a/arch/arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts +++ b/arch/arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts @@ -5,6 +5,7 @@ #include #include #include "qcom-msm8660.dtsi" +#include "pm8058.dtsi" / { model = "Qualcomm APQ8060 Dragonboard"; diff --git a/arch/arm/boot/dts/qcom/qcom-msm8660-surf.dts b/arch/arm/boot/dts/qcom/qcom-msm8660-surf.dts index a5441aecd637..be2fbc1e0950 100644 --- a/arch/arm/boot/dts/qcom/qcom-msm8660-surf.dts +++ b/arch/arm/boot/dts/qcom/qcom-msm8660-surf.dts @@ -2,6 +2,7 @@ #include #include "qcom-msm8660.dtsi" +#include "pm8058.dtsi" / { model = "Qualcomm MSM8660 SURF"; diff --git a/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi index 84b0366792d4..eef4712bbcc4 100644 --- a/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi @@ -73,22 +73,6 @@ sleep-clk { }; }; - /* - * These channels from the ADC are simply hardware monitors. - * That is why the ADC is referred to as "HKADC" - HouseKeeping - * ADC. - */ - iio-hwmon { - compatible = "iio-hwmon"; - io-channels = <&pm8058_xoadc 0x00 0x01>, /* Battery */ - <&pm8058_xoadc 0x00 0x02>, /* DC in (charger) */ - <&pm8058_xoadc 0x00 0x04>, /* VPH the main system voltage */ - <&pm8058_xoadc 0x00 0x0b>, /* Die temperature */ - <&pm8058_xoadc 0x00 0x0c>, /* Reference voltage 1.25V */ - <&pm8058_xoadc 0x00 0x0d>, /* Reference voltage 0.625V */ - <&pm8058_xoadc 0x00 0x0e>; /* Reference voltage 0.325V */ - }; - soc: soc { #address-cells = <1>; #size-cells = <1>; @@ -334,141 +318,10 @@ ebi2: external-bus@1a100000 { status = "disabled"; }; - ssbi@500000 { + ssbi: ssbi@500000 { compatible = "qcom,ssbi"; reg = <0x500000 0x1000>; qcom,controller-type = "pmic-arbiter"; - - pm8058: pmic { - compatible = "qcom,pm8058"; - #interrupt-cells = <2>; - interrupt-controller; - #address-cells = <1>; - #size-cells = <0>; - - pm8058_gpio: gpio@150 { - compatible = "qcom,pm8058-gpio", - "qcom,ssbi-gpio"; - reg = <0x150>; - interrupt-controller; - #interrupt-cells = <2>; - gpio-controller; - gpio-ranges = <&pm8058_gpio 0 0 44>; - #gpio-cells = <2>; - - }; - - pm8058_mpps: mpps@50 { - compatible = "qcom,pm8058-mpp", - "qcom,ssbi-mpp"; - reg = <0x50>; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&pm8058_mpps 0 0 12>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - pwrkey@1c { - compatible = "qcom,pm8058-pwrkey"; - reg = <0x1c>; - interrupt-parent = <&pm8058>; - interrupts = <50 1>, <51 1>; - debounce = <15625>; - pull-up; - }; - - pm8058_keypad: keypad@148 { - compatible = "qcom,pm8058-keypad"; - reg = <0x148>; - interrupt-parent = <&pm8058>; - interrupts = <74 1>, <75 1>; - debounce = <15>; - scan-delay = <32>; - row-hold = <91500>; - }; - - pm8058_xoadc: xoadc@197 { - compatible = "qcom,pm8058-adc"; - reg = <0x197>; - interrupts-extended = <&pm8058 76 IRQ_TYPE_EDGE_RISING>; - #address-cells = <2>; - #size-cells = <0>; - #io-channel-cells = <2>; - - vcoin: adc-channel@0 { - reg = <0x00 0x00>; - }; - vbat: adc-channel@1 { - reg = <0x00 0x01>; - }; - dcin: adc-channel@2 { - reg = <0x00 0x02>; - }; - ichg: adc-channel@3 { - reg = <0x00 0x03>; - }; - vph_pwr: adc-channel@4 { - reg = <0x00 0x04>; - }; - usb_vbus: adc-channel@a { - reg = <0x00 0x0a>; - }; - die_temp: adc-channel@b { - reg = <0x00 0x0b>; - }; - ref_625mv: adc-channel@c { - reg = <0x00 0x0c>; - }; - ref_1250mv: adc-channel@d { - reg = <0x00 0x0d>; - }; - ref_325mv: adc-channel@e { - reg = <0x00 0x0e>; - }; - ref_muxoff: adc-channel@f { - reg = <0x00 0x0f>; - }; - }; - - rtc@1e8 { - compatible = "qcom,pm8058-rtc"; - reg = <0x1e8>; - interrupt-parent = <&pm8058>; - interrupts = <39 1>; - allow-set-time; - }; - - vibrator@4a { - compatible = "qcom,pm8058-vib"; - reg = <0x4a>; - }; - - pm8058_led48: led@48 { - compatible = "qcom,pm8058-keypad-led"; - reg = <0x48>; - status = "disabled"; - }; - - pm8058_led131: led@131 { - compatible = "qcom,pm8058-led"; - reg = <0x131>; - status = "disabled"; - }; - - pm8058_led132: led@132 { - compatible = "qcom,pm8058-led"; - reg = <0x132>; - status = "disabled"; - }; - - pm8058_led133: led@133 { - compatible = "qcom,pm8058-led"; - reg = <0x133>; - status = "disabled"; - }; - - }; }; l2cc: clock-controller@2082000 {