diff mbox series

[v3,1/3] iio: adc: ad7192: Use bitfield access macros

Message ID 20230924215148.102491-2-alisadariana@gmail.com (mailing list archive)
State Accepted
Headers show
Series iio: adc: ad7192: Add improvements and feature | expand

Commit Message

Alisa-Dariana Roman Sept. 24, 2023, 9:51 p.m. UTC 
From: Alisa-Dariana Roman <alisa.roman@analog.com>

Include bitfield.h and update driver to use bitfield access macros
GENMASK, FIELD_PREP and FIELD_GET.

Remove old macros in favor of using FIELD_PREP and masks.

Change %d to %ld to match the type of FIELD_GET().

Signed-off-by: Alisa-Dariana Roman <alisa.roman@analog.com>
---
 drivers/iio/adc/ad7192.c | 73 ++++++++++++++++++++--------------------
 1 file changed, 37 insertions(+), 36 deletions(-)

Comments

Jonathan Cameron Sept. 30, 2023, 5:13 p.m. UTC | #1 
On Mon, 25 Sep 2023 00:51:46 +0300
alisadariana@gmail.com wrote:

> From: Alisa-Dariana Roman <alisa.roman@analog.com>
> 
> Include bitfield.h and update driver to use bitfield access macros
> GENMASK, FIELD_PREP and FIELD_GET.
> 
> Remove old macros in favor of using FIELD_PREP and masks.
> 
> Change %d to %ld to match the type of FIELD_GET().
> 
> Signed-off-by: Alisa-Dariana Roman <alisa.roman@analog.com>
Hi Alisa-Dariana,

One more !! in here. I'll get rid of that whilst applying.

Applied to the togreg branch of iio.git.

Thanks,

Jonathan


> @@ -682,7 +682,8 @@ static int ad7192_read_raw(struct iio_dev *indio_dev,
>  			   long m)
>  {
>  	struct ad7192_state *st = iio_priv(indio_dev);
> -	bool unipolar = !!(st->conf & AD7192_CONF_UNIPOLAR);
> +	bool unipolar = !!FIELD_GET(AD7192_CONF_UNIPOLAR, st->conf);

This !! not needed.

> +	u8 gain = FIELD_GET(AD7192_CONF_GAIN_MASK, st->conf);
>  
>  	switch (m) {
>  	case IIO_CHAN_INFO_RAW:
diff mbox series

Patch

diff --git a/drivers/iio/adc/ad7192.c b/drivers/iio/adc/ad7192.c
index 69d1103b9508..d693f2ce8a20 100644
--- a/drivers/iio/adc/ad7192.c
+++ b/drivers/iio/adc/ad7192.c
@@ -6,6 +6,7 @@ 
  */
 
 #include <linux/interrupt.h>
+#include <linux/bitfield.h>
 #include <linux/clk.h>
 #include <linux/device.h>
 #include <linux/kernel.h>
@@ -43,7 +44,7 @@ 
 #define AD7192_COMM_WEN		BIT(7) /* Write Enable */
 #define AD7192_COMM_WRITE	0 /* Write Operation */
 #define AD7192_COMM_READ	BIT(6) /* Read Operation */
-#define AD7192_COMM_ADDR(x)	(((x) & 0x7) << 3) /* Register Address */
+#define AD7192_COMM_ADDR_MASK	GENMASK(5, 3) /* Register Address Mask */
 #define AD7192_COMM_CREAD	BIT(2) /* Continuous Read of Data Register */
 
 /* Status Register Bit Designations (AD7192_REG_STAT) */
@@ -56,17 +57,16 @@ 
 #define AD7192_STAT_CH1		BIT(0) /* Channel 1 */
 
 /* Mode Register Bit Designations (AD7192_REG_MODE) */
-#define AD7192_MODE_SEL(x)	(((x) & 0x7) << 21) /* Operation Mode Select */
-#define AD7192_MODE_SEL_MASK	(0x7 << 21) /* Operation Mode Select Mask */
-#define AD7192_MODE_STA(x)	(((x) & 0x1) << 20) /* Status Register transmission */
+#define AD7192_MODE_SEL_MASK	GENMASK(23, 21) /* Operation Mode Select Mask */
 #define AD7192_MODE_STA_MASK	BIT(20) /* Status Register transmission Mask */
-#define AD7192_MODE_CLKSRC(x)	(((x) & 0x3) << 18) /* Clock Source Select */
+#define AD7192_MODE_CLKSRC_MASK	GENMASK(19, 18) /* Clock Source Select Mask */
 #define AD7192_MODE_SINC3	BIT(15) /* SINC3 Filter Select */
 #define AD7192_MODE_ENPAR	BIT(13) /* Parity Enable */
 #define AD7192_MODE_CLKDIV	BIT(12) /* Clock divide by 2 (AD7190/2 only)*/
 #define AD7192_MODE_SCYCLE	BIT(11) /* Single cycle conversion */
 #define AD7192_MODE_REJ60	BIT(10) /* 50/60Hz notch filter */
-#define AD7192_MODE_RATE(x)	((x) & 0x3FF) /* Filter Update Rate Select */
+				  /* Filter Update Rate Select Mask */
+#define AD7192_MODE_RATE_MASK	GENMASK(9, 0)
 
 /* Mode Register: AD7192_MODE_SEL options */
 #define AD7192_MODE_CONT		0 /* Continuous Conversion Mode */
@@ -92,13 +92,12 @@ 
 #define AD7192_CONF_CHOP	BIT(23) /* CHOP enable */
 #define AD7192_CONF_ACX		BIT(22) /* AC excitation enable(AD7195 only) */
 #define AD7192_CONF_REFSEL	BIT(20) /* REFIN1/REFIN2 Reference Select */
-#define AD7192_CONF_CHAN(x)	((x) << 8) /* Channel select */
-#define AD7192_CONF_CHAN_MASK	(0x7FF << 8) /* Channel select mask */
+#define AD7192_CONF_CHAN_MASK	GENMASK(18, 8) /* Channel select mask */
 #define AD7192_CONF_BURN	BIT(7) /* Burnout current enable */
 #define AD7192_CONF_REFDET	BIT(6) /* Reference detect enable */
 #define AD7192_CONF_BUF		BIT(4) /* Buffered Mode Enable */
 #define AD7192_CONF_UNIPOLAR	BIT(3) /* Unipolar/Bipolar Enable */
-#define AD7192_CONF_GAIN(x)	((x) & 0x7) /* Gain Select */
+#define AD7192_CONF_GAIN_MASK	GENMASK(2, 0) /* Gain Select */
 
 #define AD7192_CH_AIN1P_AIN2M	BIT(0) /* AIN1(+) - AIN2(-) */
 #define AD7192_CH_AIN3P_AIN4M	BIT(1) /* AIN3(+) - AIN4(-) */
@@ -130,7 +129,7 @@ 
 #define CHIPID_AD7192		0x0
 #define CHIPID_AD7193		0x2
 #define CHIPID_AD7195		0x6
-#define AD7192_ID_MASK		0x0F
+#define AD7192_ID_MASK		GENMASK(3, 0)
 
 /* GPOCON Register Bit Designations (AD7192_REG_GPOCON) */
 #define AD7192_GPOCON_BPDSW	BIT(6) /* Bridge power-down switch enable */
@@ -272,7 +271,7 @@  static int ad7192_set_channel(struct ad_sigma_delta *sd, unsigned int channel)
 	struct ad7192_state *st = ad_sigma_delta_to_ad7192(sd);
 
 	st->conf &= ~AD7192_CONF_CHAN_MASK;
-	st->conf |= AD7192_CONF_CHAN(channel);
+	st->conf |= FIELD_PREP(AD7192_CONF_CHAN_MASK, channel);
 
 	return ad_sd_write_reg(&st->sd, AD7192_REG_CONF, 3, st->conf);
 }
@@ -283,7 +282,7 @@  static int ad7192_set_mode(struct ad_sigma_delta *sd,
 	struct ad7192_state *st = ad_sigma_delta_to_ad7192(sd);
 
 	st->mode &= ~AD7192_MODE_SEL_MASK;
-	st->mode |= AD7192_MODE_SEL(mode);
+	st->mode |= FIELD_PREP(AD7192_MODE_SEL_MASK, mode);
 
 	return ad_sd_write_reg(&st->sd, AD7192_REG_MODE, 3, st->mode);
 }
@@ -295,7 +294,7 @@  static int ad7192_append_status(struct ad_sigma_delta *sd, bool append)
 	int ret;
 
 	mode &= ~AD7192_MODE_STA_MASK;
-	mode |= AD7192_MODE_STA(append);
+	mode |= FIELD_PREP(AD7192_MODE_STA_MASK, append);
 
 	ret = ad_sd_write_reg(&st->sd, AD7192_REG_MODE, 3, mode);
 	if (ret < 0)
@@ -399,17 +398,17 @@  static int ad7192_setup(struct iio_dev *indio_dev, struct device_node *np)
 	if (ret)
 		return ret;
 
-	id &= AD7192_ID_MASK;
+	id = FIELD_GET(AD7192_ID_MASK, id);
 
 	if (id != st->chip_info->chip_id)
 		dev_warn(&st->sd.spi->dev, "device ID query failed (0x%X != 0x%X)\n",
 			 id, st->chip_info->chip_id);
 
-	st->mode = AD7192_MODE_SEL(AD7192_MODE_IDLE) |
-		AD7192_MODE_CLKSRC(st->clock_sel) |
-		AD7192_MODE_RATE(480);
+	st->mode = FIELD_PREP(AD7192_MODE_SEL_MASK, AD7192_MODE_IDLE) |
+		FIELD_PREP(AD7192_MODE_CLKSRC_MASK, st->clock_sel) |
+		FIELD_PREP(AD7192_MODE_RATE_MASK, 480);
 
-	st->conf = AD7192_CONF_GAIN(0);
+	st->conf = FIELD_PREP(AD7192_CONF_GAIN_MASK, 0);
 
 	rej60_en = of_property_read_bool(np, "adi,rejection-60-Hz-enable");
 	if (rej60_en)
@@ -455,7 +454,7 @@  static int ad7192_setup(struct iio_dev *indio_dev, struct device_node *np)
 	for (i = 0; i < ARRAY_SIZE(st->scale_avail); i++) {
 		scale_uv = ((u64)st->int_vref_mv * 100000000)
 			>> (indio_dev->channels[0].scan_type.realbits -
-			((st->conf & AD7192_CONF_UNIPOLAR) ? 0 : 1));
+			!FIELD_GET(AD7192_CONF_UNIPOLAR, st->conf));
 		scale_uv >>= i;
 
 		st->scale_avail[i][1] = do_div(scale_uv, 100000000) * 10;
@@ -472,7 +471,7 @@  static ssize_t ad7192_show_ac_excitation(struct device *dev,
 	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ad7192_state *st = iio_priv(indio_dev);
 
-	return sysfs_emit(buf, "%d\n", !!(st->conf & AD7192_CONF_ACX));
+	return sysfs_emit(buf, "%ld\n", FIELD_GET(AD7192_CONF_ACX, st->conf));
 }
 
 static ssize_t ad7192_show_bridge_switch(struct device *dev,
@@ -482,7 +481,8 @@  static ssize_t ad7192_show_bridge_switch(struct device *dev,
 	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ad7192_state *st = iio_priv(indio_dev);
 
-	return sysfs_emit(buf, "%d\n", !!(st->gpocon & AD7192_GPOCON_BPDSW));
+	return sysfs_emit(buf, "%ld\n",
+			  FIELD_GET(AD7192_GPOCON_BPDSW, st->gpocon));
 }
 
 static ssize_t ad7192_set(struct device *dev,
@@ -537,14 +537,14 @@  static void ad7192_get_available_filter_freq(struct ad7192_state *st,
 
 	/* Formulas for filter at page 25 of the datasheet */
 	fadc = DIV_ROUND_CLOSEST(st->fclk,
-				 AD7192_SYNC4_FILTER * AD7192_MODE_RATE(st->mode));
+				 AD7192_SYNC4_FILTER * FIELD_GET(AD7192_MODE_RATE_MASK, st->mode));
 	freq[0] = DIV_ROUND_CLOSEST(fadc * 240, 1024);
 
 	fadc = DIV_ROUND_CLOSEST(st->fclk,
-				 AD7192_SYNC3_FILTER * AD7192_MODE_RATE(st->mode));
+				 AD7192_SYNC3_FILTER * FIELD_GET(AD7192_MODE_RATE_MASK, st->mode));
 	freq[1] = DIV_ROUND_CLOSEST(fadc * 240, 1024);
 
-	fadc = DIV_ROUND_CLOSEST(st->fclk, AD7192_MODE_RATE(st->mode));
+	fadc = DIV_ROUND_CLOSEST(st->fclk, FIELD_GET(AD7192_MODE_RATE_MASK, st->mode));
 	freq[2] = DIV_ROUND_CLOSEST(fadc * 230, 1024);
 	freq[3] = DIV_ROUND_CLOSEST(fadc * 272, 1024);
 }
@@ -665,11 +665,11 @@  static int ad7192_get_3db_filter_freq(struct ad7192_state *st)
 	unsigned int fadc;
 
 	fadc = DIV_ROUND_CLOSEST(st->fclk,
-				 st->f_order * AD7192_MODE_RATE(st->mode));
+				 st->f_order * FIELD_GET(AD7192_MODE_RATE_MASK, st->mode));
 
-	if (st->conf & AD7192_CONF_CHOP)
+	if (FIELD_GET(AD7192_CONF_CHOP, st->conf))
 		return DIV_ROUND_CLOSEST(fadc * 240, 1024);
-	if (st->mode & AD7192_MODE_SINC3)
+	if (FIELD_GET(AD7192_MODE_SINC3, st->mode))
 		return DIV_ROUND_CLOSEST(fadc * 272, 1024);
 	else
 		return DIV_ROUND_CLOSEST(fadc * 230, 1024);
@@ -682,7 +682,8 @@  static int ad7192_read_raw(struct iio_dev *indio_dev,
 			   long m)
 {
 	struct ad7192_state *st = iio_priv(indio_dev);
-	bool unipolar = !!(st->conf & AD7192_CONF_UNIPOLAR);
+	bool unipolar = !!FIELD_GET(AD7192_CONF_UNIPOLAR, st->conf);
+	u8 gain = FIELD_GET(AD7192_CONF_GAIN_MASK, st->conf);
 
 	switch (m) {
 	case IIO_CHAN_INFO_RAW:
@@ -691,8 +692,8 @@  static int ad7192_read_raw(struct iio_dev *indio_dev,
 		switch (chan->type) {
 		case IIO_VOLTAGE:
 			mutex_lock(&st->lock);
-			*val = st->scale_avail[AD7192_CONF_GAIN(st->conf)][0];
-			*val2 = st->scale_avail[AD7192_CONF_GAIN(st->conf)][1];
+			*val = st->scale_avail[gain][0];
+			*val2 = st->scale_avail[gain][1];
 			mutex_unlock(&st->lock);
 			return IIO_VAL_INT_PLUS_NANO;
 		case IIO_TEMP:
@@ -713,7 +714,7 @@  static int ad7192_read_raw(struct iio_dev *indio_dev,
 		return IIO_VAL_INT;
 	case IIO_CHAN_INFO_SAMP_FREQ:
 		*val = st->fclk /
-			(st->f_order * 1024 * AD7192_MODE_RATE(st->mode));
+			(st->f_order * 1024 * FIELD_GET(AD7192_MODE_RATE_MASK, st->mode));
 		return IIO_VAL_INT;
 	case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY:
 		*val = ad7192_get_3db_filter_freq(st);
@@ -746,8 +747,8 @@  static int ad7192_write_raw(struct iio_dev *indio_dev,
 			if (val2 == st->scale_avail[i][1]) {
 				ret = 0;
 				tmp = st->conf;
-				st->conf &= ~AD7192_CONF_GAIN(-1);
-				st->conf |= AD7192_CONF_GAIN(i);
+				st->conf &= ~AD7192_CONF_GAIN_MASK;
+				st->conf |= FIELD_PREP(AD7192_CONF_GAIN_MASK, i);
 				if (tmp == st->conf)
 					break;
 				ad_sd_write_reg(&st->sd, AD7192_REG_CONF,
@@ -769,8 +770,8 @@  static int ad7192_write_raw(struct iio_dev *indio_dev,
 			break;
 		}
 
-		st->mode &= ~AD7192_MODE_RATE(-1);
-		st->mode |= AD7192_MODE_RATE(div);
+		st->mode &= ~AD7192_MODE_RATE_MASK;
+		st->mode |= FIELD_PREP(AD7192_MODE_RATE_MASK, div);
 		ad_sd_write_reg(&st->sd, AD7192_REG_MODE, 3, st->mode);
 		break;
 	case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY:
@@ -830,7 +831,7 @@  static int ad7192_update_scan_mode(struct iio_dev *indio_dev, const unsigned lon
 
 	conf &= ~AD7192_CONF_CHAN_MASK;
 	for_each_set_bit(i, scan_mask, 8)
-		conf |= AD7192_CONF_CHAN(i);
+		conf |= FIELD_PREP(AD7192_CONF_CHAN_MASK, i);
 
 	ret = ad_sd_write_reg(&st->sd, AD7192_REG_CONF, 3, conf);
 	if (ret < 0)