@@ -735,6 +735,17 @@ config MAX1363
To compile this driver as a module, choose M here: the module will be
called max1363.
+config MAX34408
+ tristate "Maxim max34408/max344089 ADC driver"
+ depends on I2C
+ help
+ Say yes here to build support for Maxim max34408/max34409 current sense
+ monitor with 8-bits ADC interface with overcurrent delay/threshold and
+ shutdown delay.
+
+ To compile this driver as a module, choose M here: the module will be
+ called max34408.
+
config MAX77541_ADC
tristate "Analog Devices MAX77541 ADC driver"
depends on MFD_MAX77541
@@ -67,6 +67,7 @@ obj-$(CONFIG_MAX11205) += max11205.o
obj-$(CONFIG_MAX11410) += max11410.o
obj-$(CONFIG_MAX1241) += max1241.o
obj-$(CONFIG_MAX1363) += max1363.o
+obj-$(CONFIG_MAX34408) += max34408.o
obj-$(CONFIG_MAX77541_ADC) += max77541-adc.o
obj-$(CONFIG_MAX9611) += max9611.o
obj-$(CONFIG_MCP320X) += mcp320x.o
new file mode 100644
@@ -0,0 +1,270 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * IIO driver for Maxim MAX34409/34408 ADC, 4-Channels/2-Channels, 8bits, I2C
+ *
+ * Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/MAX34408-MAX34409.pdf
+ *
+ * TODO: ALERT interrupt, Overcurrent delay, Shutdown delay
+ */
+
+#include <linux/bitfield.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of_device.h>
+#include <linux/regmap.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/types.h>
+
+#define MAX34408_STATUS_REG 0x0
+#define MAX34408_CONTROL_REG 0x1
+#define MAX34408_OCDELAY_REG 0x2
+#define MAX34408_SDDELAY_REG 0x3
+
+#define MAX34408_ADC1_REG 0x4
+#define MAX34408_ADC2_REG 0x5
+/* ADC3 & ADC4 always returns 0x0 on 34408 */
+#define MAX34409_ADC3_REG 0x6
+#define MAX34409_ADC4_REG 0x7
+
+#define MAX34408_OCT1_REG 0x8
+#define MAX34408_OCT2_REG 0x9
+#define MAX34408_OCT3_REG 0xA
+#define MAX34408_OCT4_REG 0xB
+
+#define MAX34408_DID_REG 0xC
+#define MAX34408_DCYY_REG 0xD
+#define MAX34408_DCWW_REG 0xE
+
+/* Bit masks for status register */
+#define MAX34408_STATUS_OC_MSK GENMASK(1, 0)
+#define MAX34409_STATUS_OC_MSK GENMASK(3, 0)
+#define MAX34408_STATUS_SHTDN BIT(4)
+#define MAX34408_STATUS_ENA BIT(5)
+
+/* Bit masks for control register */
+#define MAX34408_CONTROL_AVG0 BIT(0)
+#define MAX34408_CONTROL_AVG1 BIT(1)
+#define MAX34408_CONTROL_AVG2 BIT(2)
+#define MAX34408_CONTROL_ALERT BIT(3)
+
+#define MAX34408_DEFAULT_AVG 0x4
+
+/* Bit masks for over current delay */
+#define MAX34408_OCDELAY_OCD_MSK GENMASK(6, 0)
+#define MAX34408_OCDELAY_RESET BIT(7)
+
+/* Bit masks for shutdown delay */
+#define MAX34408_SDDELAY_SHD_MSK GENMASK(6, 0)
+#define MAX34408_SDDELAY_RESET BIT(7)
+
+#define MAX34408_DEFAULT_RSENSE 1000
+
+/**
+ * struct max34408_data - max34408/max34409 specific data.
+ * @regmap: device register map.
+ * @dev: max34408 device.
+ * @lock: lock for protecting access to device hardware registers, mostly
+ * for read modify write cycles for control registers.
+ * @input_rsense: Rsense values in uOhm, will be overwritten by
+ * values from channel nodes.
+ */
+struct max34408_data {
+ struct regmap *regmap;
+ struct device *dev;
+ struct mutex lock;
+ u32 input_rsense[4];
+};
+
+static const struct regmap_config max34408_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .max_register = MAX34408_DCWW_REG,
+};
+
+struct max34408_adc_model_data {
+ const char *model_name;
+ const struct iio_chan_spec *channels;
+ const int num_channels;
+};
+
+#define MAX34008_CHANNEL(_index, _address) \
+ { \
+ .type = IIO_CURRENT, \
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
+ BIT(IIO_CHAN_INFO_SCALE) | \
+ BIT(IIO_CHAN_INFO_OFFSET), \
+ .channel = (_index), \
+ .address = (_address), \
+ .indexed = 1, \
+ }
+
+static const struct iio_chan_spec max34408_channels[] = {
+ MAX34008_CHANNEL(0, MAX34408_ADC1_REG),
+ MAX34008_CHANNEL(1, MAX34408_ADC2_REG),
+};
+
+static const struct iio_chan_spec max34409_channels[] = {
+ MAX34008_CHANNEL(0, MAX34408_ADC1_REG),
+ MAX34008_CHANNEL(1, MAX34408_ADC2_REG),
+ MAX34008_CHANNEL(2, MAX34409_ADC3_REG),
+ MAX34008_CHANNEL(3, MAX34409_ADC4_REG),
+};
+
+static int max34408_read_adc_avg(struct max34408_data *max34408,
+ const struct iio_chan_spec *chan, int *val)
+{
+ unsigned int ctrl;
+ int rc;
+
+ guard(mutex)(&max34408->lock);
+ rc = regmap_read(max34408->regmap, MAX34408_CONTROL_REG, (u32 *)&ctrl);
+ if (rc)
+ return rc;
+
+ /* set averaging (0b100) default values*/
+ rc = regmap_write(max34408->regmap, MAX34408_CONTROL_REG,
+ MAX34408_DEFAULT_AVG);
+ if (rc) {
+ dev_err(max34408->dev,
+ "Error (%d) writing control register\n", rc);
+ return rc;
+ }
+
+ rc = regmap_read(max34408->regmap, chan->address, val);
+ if (rc)
+ return rc;
+
+ /* back to old values */
+ rc = regmap_write(max34408->regmap, MAX34408_CONTROL_REG, ctrl);
+ if (rc)
+ dev_err(max34408->dev,
+ "Error (%d) writing control register\n", rc);
+
+ return rc;
+}
+
+static int max34408_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int *val, int *val2, long mask)
+{
+ struct max34408_data *max34408 = iio_priv(indio_dev);
+ int rc;
+
+ switch (mask) {
+ case IIO_CHAN_INFO_RAW:
+ rc = max34408_read_adc_avg(max34408, chan, val);
+ if (rc)
+ return rc;
+ return IIO_VAL_INT;
+ case IIO_CHAN_INFO_SCALE:
+ /*
+ * calcluate current for 8bit ADC with Rsense
+ * value.
+ * 10 mV * 1000 / Rsense uOhm = max current
+ * (max current * adc val * 1000) / (2^8 - 1) mA
+ */
+ *val = 10000 / max34408->input_rsense[chan->channel];
+ *val2 = 8;
+ return IIO_VAL_FRACTIONAL_LOG2;
+ default:
+ return -EINVAL;
+ }
+}
+
+static const struct iio_info max34408_info = {
+ .read_raw = max34408_read_raw,
+};
+
+static const struct max34408_adc_model_data max34408_model_data = {
+ .model_name = "max34408",
+ .channels = max34408_channels,
+ .num_channels = 2,
+};
+
+static const struct max34408_adc_model_data max34409_model_data = {
+ .model_name = "max34409",
+ .channels = max34409_channels,
+ .num_channels = 4,
+};
+
+static const struct of_device_id max34408_of_match[] = {
+ {
+ .compatible = "maxim,max34408",
+ .data = &max34408_model_data,
+ },
+ {
+ .compatible = "maxim,max34409",
+ .data = &max34409_model_data,
+ },
+ {}
+};
+MODULE_DEVICE_TABLE(of, max34408_of_match);
+
+static int max34408_probe(struct i2c_client *client)
+{
+ const struct max34408_adc_model_data *model_data;
+ struct device *dev = &client->dev;
+ const struct of_device_id *match;
+ struct max34408_data *max34408;
+ struct device_node *child;
+ struct iio_dev *indio_dev;
+ struct regmap *regmap;
+ int rc, i;
+
+ match = of_match_device(max34408_of_match, dev);
+ if (!match)
+ return -EINVAL;
+ model_data = match->data;
+
+ regmap = devm_regmap_init_i2c(client, &max34408_regmap_config);
+ if (IS_ERR(regmap)) {
+ dev_err_probe(dev, PTR_ERR(regmap),
+ "regmap_init failed\n");
+ return PTR_ERR(regmap);
+ }
+
+ indio_dev = devm_iio_device_alloc(dev, sizeof(*max34408));
+ if (!indio_dev)
+ return -ENOMEM;
+
+ max34408 = iio_priv(indio_dev);
+ max34408->regmap = regmap;
+ max34408->dev = dev;
+ mutex_init(&max34408->lock);
+
+ for_each_available_child_of_node(dev->of_node, child) {
+ of_property_read_u32(child, "maxim,rsense-val-micro-ohms",
+ &max34408->input_rsense[i]);
+ i++;
+ }
+
+ /* disable ALERT and averaging */
+ rc = regmap_write(max34408->regmap, MAX34408_CONTROL_REG, 0x0);
+ if (rc)
+ return rc;
+
+ indio_dev->channels = model_data->channels;
+ indio_dev->num_channels = model_data->num_channels;
+ indio_dev->name = model_data->model_name;
+
+ indio_dev->info = &max34408_info;
+ indio_dev->modes = INDIO_DIRECT_MODE;
+
+ return devm_iio_device_register(dev, indio_dev);
+}
+
+static struct i2c_driver max34408_driver = {
+ .driver = {
+ .name = "max34408",
+ .of_match_table = max34408_of_match,
+ },
+ .probe = max34408_probe,
+};
+module_i2c_driver(max34408_driver);
+
+MODULE_AUTHOR("Ivan Mikhaylov <fr0st61te@gmail.com>");
+MODULE_DESCRIPTION("Maxim MAX34408/34409 ADC driver");
+MODULE_LICENSE("GPL");
The MAX34408/MAX34409 are two- and four-channel current monitors that are configured and monitored with a standard I2C/SMBus serial interface. Each unidirectional current sensor offers precision high-side operation with a low full-scale sense voltage. The devices automatically sequence through two or four channels and collect the current-sense samples and average them to reduce the effect of impulse noise. The raw ADC samples are compared to user-programmable digital thresholds to indicate overcurrent conditions. Overcurrent conditions trigger a hardware output to provide an immediate indication to shut down any necessary external circuitry. Add as ADC driver which only supports current monitoring for now. Link: https://www.analog.com/media/en/technical-documentation/data-sheets/MAX34408-MAX34409.pdf Signed-off-by: Ivan Mikhaylov <fr0st61te@gmail.com> --- drivers/iio/adc/Kconfig | 11 ++ drivers/iio/adc/Makefile | 1 + drivers/iio/adc/max34408.c | 270 +++++++++++++++++++++++++++++++++++++ 3 files changed, 282 insertions(+) create mode 100644 drivers/iio/adc/max34408.c