Message ID | 20231116131407.13860-1-579lpy@gmail.com (mailing list archive) |
---|---|
State | Changes Requested |
Headers | show |
Series | [[1/2] ] iio: humidity: Add driver for ti HDC302x humidity sensors | expand |
On Thu, Nov 16, 2023 at 09:14:07PM +0800, Li peiyu wrote: > Add device tree bindings for HDC3020/HDC3021/HDC3022 humidity and > temperature sensors. > > Signed-off-by: Li peiyu <579lpy@gmail.com> > --- > .../bindings/iio/humidity/ti,hdc3020.yaml | 48 +++++++++++++++++++ > 1 file changed, 48 insertions(+) > create mode 100644 Documentation/devicetree/bindings/iio/humidity/ti,hdc3020.yaml > > diff --git a/Documentation/devicetree/bindings/iio/humidity/ti,hdc3020.yaml b/Documentation/devicetree/bindings/iio/humidity/ti,hdc3020.yaml > new file mode 100644 > index 000000000000..8015c4bb5b2f > --- /dev/null > +++ b/Documentation/devicetree/bindings/iio/humidity/ti,hdc3020.yaml > @@ -0,0 +1,48 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/iio/humidity/ti,hdc3020.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: HDC3020/HDC3021/HDC3022 humidity and temperature iio sensors > + > +maintainers: > + - Jonathan Cameron <jic23@kernel.org> Usually this is you, not the maintainer of the subsystem, since you have the hardware in question and an interest in it specifically. > + > +description: | > + The HDC302x is an integrated capacitive based relative humidity (RH) > + and temperature sensor. > + > + datasheet is available: > + https://www.ti.com/lit/ds/symlink/hdc3020.pdf > + > +properties: > + compatible: > + enum: > + - ti,hdc3020 > + - ti,hdc3021 > + - ti,hdc3022 Looking at your driver, all three of these seem to be compatible? I did only have a quick look though, so please correct me if that is not the case. If they are compatible, please set this up to use a fallback compatible - for example allow compatible = "ti,hdc3020"; compatible = "ti,hdc3021", "ti,hdc3020"; compatible = "ti,hdc3022", "ti,hdc3020"; > + > + interrupts: > + maxItems: 1 > + > + reg: > + maxItems: 1 > + > +required: > + - compatible > + - reg > + > +additionalProperties: false > + > +examples: > + - | > + i2c { > + #address-cells = <1>; > + #size-cells = <0>; > + > + humidity@47 { The generic node name here should probably be "humidity-sensor". Cheers, Conor. > + compatible = "ti,hdc3020"; > + reg = <0x47>; > + }; > + }; > -- > 2.34.1 >
diff --git a/Documentation/devicetree/bindings/iio/humidity/ti,hdc3020.yaml b/Documentation/devicetree/bindings/iio/humidity/ti,hdc3020.yaml new file mode 100644 index 000000000000..8015c4bb5b2f --- /dev/null +++ b/Documentation/devicetree/bindings/iio/humidity/ti,hdc3020.yaml @@ -0,0 +1,48 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/humidity/ti,hdc3020.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: HDC3020/HDC3021/HDC3022 humidity and temperature iio sensors + +maintainers: + - Jonathan Cameron <jic23@kernel.org> + +description: | + The HDC302x is an integrated capacitive based relative humidity (RH) + and temperature sensor. + + datasheet is available: + https://www.ti.com/lit/ds/symlink/hdc3020.pdf + +properties: + compatible: + enum: + - ti,hdc3020 + - ti,hdc3021 + - ti,hdc3022 + + interrupts: + maxItems: 1 + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + humidity@47 { + compatible = "ti,hdc3020"; + reg = <0x47>; + }; + };
Add device tree bindings for HDC3020/HDC3021/HDC3022 humidity and temperature sensors. Signed-off-by: Li peiyu <579lpy@gmail.com> --- .../bindings/iio/humidity/ti,hdc3020.yaml | 48 +++++++++++++++++++ 1 file changed, 48 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/humidity/ti,hdc3020.yaml