@@ -318,7 +318,6 @@ static int rcar_gyroadc_parse_subdevs(struct iio_dev *indio_dev)
struct rcar_gyroadc *priv = iio_priv(indio_dev);
struct device *dev = priv->dev;
struct device_node *np = dev->of_node;
- struct device_node *child;
struct regulator *vref;
unsigned int reg;
unsigned int adcmode = -1, childmode;
@@ -326,7 +325,7 @@ static int rcar_gyroadc_parse_subdevs(struct iio_dev *indio_dev)
unsigned int num_channels;
int ret, first = 1;
- for_each_child_of_node(np, child) {
+ for_each_available_child_of_node_scoped(np, child) {
of_id = of_match_node(rcar_gyroadc_child_match, child);
if (!of_id) {
dev_err(dev, "Ignoring unsupported ADC \"%pOFn\".",
@@ -352,7 +351,7 @@ static int rcar_gyroadc_parse_subdevs(struct iio_dev *indio_dev)
num_channels = ARRAY_SIZE(rcar_gyroadc_iio_channels_3);
break;
default:
- goto err_e_inval;
+ return -EINVAL;
}
/*
@@ -369,7 +368,7 @@ static int rcar_gyroadc_parse_subdevs(struct iio_dev *indio_dev)
dev_err(dev,
"Failed to get child reg property of ADC \"%pOFn\".\n",
child);
- goto err_of_node_put;
+ return ret;
}
/* Channel number is too high. */
@@ -377,7 +376,7 @@ static int rcar_gyroadc_parse_subdevs(struct iio_dev *indio_dev)
dev_err(dev,
"Only %i channels supported with %pOFn, but reg = <%i>.\n",
num_channels, child, reg);
- goto err_e_inval;
+ return -EINVAL;
}
}
@@ -386,7 +385,7 @@ static int rcar_gyroadc_parse_subdevs(struct iio_dev *indio_dev)
dev_err(dev,
"Channel %i uses different ADC mode than the rest.\n",
reg);
- goto err_e_inval;
+ return -EINVAL;
}
/* Channel is valid, grab the regulator. */
@@ -396,8 +395,7 @@ static int rcar_gyroadc_parse_subdevs(struct iio_dev *indio_dev)
if (IS_ERR(vref)) {
dev_dbg(dev, "Channel %i 'vref' supply not connected.\n",
reg);
- ret = PTR_ERR(vref);
- goto err_of_node_put;
+ return PTR_ERR(vref);
}
priv->vref[reg] = vref;
@@ -422,7 +420,6 @@ static int rcar_gyroadc_parse_subdevs(struct iio_dev *indio_dev)
* we can stop parsing here.
*/
if (childmode == RCAR_GYROADC_MODE_SELECT_1_MB88101A) {
- of_node_put(child);
break;
}
}
@@ -433,12 +430,6 @@ static int rcar_gyroadc_parse_subdevs(struct iio_dev *indio_dev)
}
return 0;
-
-err_e_inval:
- ret = -EINVAL;
-err_of_node_put:
- of_node_put(child);
- return ret;
}
static void rcar_gyroadc_deinit_supplies(struct iio_dev *indio_dev)
Using automated cleanup to replace of_node_put() handling allows for a simplfied flow by enabling direct returns on errors. Non available child nodes should never have been considered; that is ones where status != okay and was defined. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> --- drivers/iio/adc/rcar-gyroadc.c | 21 ++++++--------------- 1 file changed, 6 insertions(+), 15 deletions(-)