| Message ID | 20240503193551.369c018b@jic23-huawei (mailing list archive) |
|---|---|
| State | Handled Elsewhere |
| Headers | show |
| Series | [PULL,V2] IIO: 2nd set of new device support, features and cleanup for the 6.10 cycle | expand |
On Fri, May 03, 2024 at 07:35:51PM +0100, Jonathan Cameron wrote: > The following changes since commit 84e79a7f63e8caeac0c1a0817408860875a9b23e: > > Merge tag 'peci-next-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/iwi/linux into char-misc-next (2024-04-23 21:31:45 -0700) > > are available in the Git repository at: > > https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-for-6.10b-take2 That worked much better, thanks! Pulled and pushed out. greg k-h
The following changes since commit 84e79a7f63e8caeac0c1a0817408860875a9b23e: Merge tag 'peci-next-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/iwi/linux into char-misc-next (2024-04-23 21:31:45 -0700) are available in the Git repository at: https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-for-6.10b-take2 for you to fetch changes up to 827dca3129708a8465bde90c86c2e3c38e62dd4f: iio: temperature: mcp9600: Fix temperature reading for negative values (2024-05-03 11:48:56 +0100) ---------------------------------------------------------------- IIO: 2nd set of new device support, features and cleanup for 6.10 (take 2) The usual mixed bag from towards the end of the cycle. Changes since take 1. Fixed the fixes tag and indeed fixed a rebase I messed up on the same fix. New devices support =================== invensense,icm42600 - Support the ICM-42686-P a high range device going up to 32g and 4000 dps New features ============ adi,ad7944 - Add support for chain mode in which many ADCs may be daisy chained and read out via a single long read. adi,ad9467/backend library - Add bus tuning related interfaces. adi,axi-adc - Add control for the AXI clock - seems always enabled early in boot for other reasons, but the driver should not rely on that.. Cleanups and minor or late breaking fixes ========================================= Micrsoft/ACPI mount matrix handling. - Replace several implementations of the Microsoft defined ROTM ACPI method with a single one. multiple drivers - Don't call the result of wait_for_completion() timeout as it's more accurate as time_left. adi,ad7266 - Stop setting the iio_dev->masklength as it's done by the IIO core and should not be set from drivers. adi,ad799x - Some checkpatch type fixes. adi,ad9839 - Ensure compelte MU_CNT1 is written during lock phase. adi,axi-dac - Fix inverted parameter. adi,adis16475 - Drop documentation of non existent sysfs files. avago,apds9306 - Fix an off by one error that overly restricts the range of persistence and adaptive thresholds that the driver accepts. freescale,mxs-lradc - Stop setting the iio_dev->masklength as it's done by the IIO core and should not be set from drivers. invensense,timestamp library - Fix timestamp vs interupt alignment and aovid soms glitches that occured when switching sampling frequency. microchip,mcp3564 - Make use of device_for_each_child_node_scoped() to allow early release without manual fwnode_handle_put(). microchip,mcp9600 - Allow for negative temperatures. microchip,pac1934 - Avoid an out of bounds array index. richtek,rtq6056 - Use iio_device_claim_direct_scoped() to automate lock release and simplify the code. sensortek,stk3110 - Drop a likely incorrect ACPI ID. No known users of this ID and it's not a valid ACPI ID. ti,ads1015 - Make use of device_for_each_child_node_scoped() to allow early release without manual fwnode_handle_put(). ---------------------------------------------------------------- Andy Shevchenko (1): iio: light: stk3310: Drop most likely fake ACPI ID Dan Carpenter (1): iio: dac: adi-axi: fix a mistake in axi_dac_ext_info_set() David Lechner (5): iio: adc: ad7266: don't set masklength iio: adc: mxs-lradc-adc: don't set masklength iio: buffer: initialize masklength accumulator to 0 iio: adc: ad7944: add support for chain mode docs: iio: ad7944: add documentation for chain mode Dimitri Fedrau (1): iio: temperature: mcp9600: Fix temperature reading for negative values Gabriel Schwartz (1): iio: adc: rtq6056: Use automated cleanup for mode handling in write_raw Gustavo Rodrigues (3): iio: adc: ad799x: change 'unsigned' to 'unsigned int' declaration iio: adc: ad799x: add blank line to avoid warning messages iio: adc: ad799x: Prefer to use octal permission Hans de Goede (4): iio: core: Add iio_read_acpi_mount_matrix() helper function iio: accel: kxcjk-1013: Use new iio_read_acpi_mount_matrix() helper iio: bmc150-accel-core: Use iio_read_acpi_mount_matrix() helper iio: accel: mxc4005: Read orientation matrix from ACPI ROTM method Jean-Baptiste Maneyrol (4): dt-bindings: iio: imu: add icm42686 inside inv_icm42600 iio: imu: inv_icm42600: add support of ICM-42686-P iio: invensense: fix interrupt timestamp alignment iio: invensense: fix timestamp glitches when switching frequency Jonathan Cameron (1): iio: adc: mcp3564: Use device_for_each_child_node_scoped() Lincoln Yuji (1): iio: adc: ti-ads1015: use device_for_each_child_node_scoped() Marius Cristea (1): iio: adc: PAC1934: fix accessing out of bounds array index Nuno Sa (8): dt-bindings: adc: axi-adc: add clocks property iio: adc: axi-adc: make sure AXI clock is enabled iio: backend: change docs padding iio: backend: add API for interface tuning iio: adc: adi-axi-adc: remove regmap max register iio: adc: adi-axi-adc: support digital interface calibration iio: adc: ad9467: support digital interface calibration iio: dac: ad9739a: write complete MU_CNT1 register during lock Ramona Gradinariu (1): docs: iio: adis16475: fix device files tables Subhajit Ghosh (1): iio: light: apds9306: Fix input arguments to in_range() Wolfram Sang (8): iio: adc: ad_sigma_delta: use 'time_left' variable with wait_for_completion_timeout() iio: adc: exynos_adc: use 'time_left' variable with wait_for_completion_timeout() iio: adc: fsl-imx25-gcq: use 'time_left' variable with wait_for_completion_interruptible_timeout() iio: adc: intel_mrfld_adc: use 'time_left' variable with wait_for_completion_interruptible_timeout() iio: adc: stm32-adc: use 'time_left' variable with wait_for_completion_interruptible_timeout() iio: adc: stm32-dfsdm-adc: use 'time_left' variable with wait_for_completion_interruptible_timeout() iio: adc: twl6030-gpadc: use 'time_left' variable with wait_for_completion_interruptible_timeout() iio: pressure: zpa2326: use 'time_left' variable with wait_for_completion_interruptible_timeout() .../devicetree/bindings/iio/adc/adi,axi-adc.yaml | 5 + .../bindings/iio/imu/invensense,icm42600.yaml | 1 + Documentation/iio/ad7944.rst | 30 +- Documentation/iio/adis16475.rst | 8 +- drivers/iio/Makefile | 1 + drivers/iio/accel/bmc150-accel-core.c | 44 +-- drivers/iio/accel/kxcjk-1013.c | 80 +---- drivers/iio/accel/mxc4005.c | 22 ++ drivers/iio/adc/ad7266.c | 1 - drivers/iio/adc/ad7944.c | 186 +++++++++- drivers/iio/adc/ad799x.c | 7 +- drivers/iio/adc/ad9467.c | 374 ++++++++++++++++++--- drivers/iio/adc/ad_sigma_delta.c | 6 +- drivers/iio/adc/adi-axi-adc.c | 127 ++++++- drivers/iio/adc/exynos_adc.c | 16 +- drivers/iio/adc/fsl-imx25-gcq.c | 10 +- drivers/iio/adc/intel_mrfld_adc.c | 12 +- drivers/iio/adc/mcp3564.c | 16 +- drivers/iio/adc/mxs-lradc-adc.c | 1 - drivers/iio/adc/pac1934.c | 9 + drivers/iio/adc/rtq6056.c | 34 +- drivers/iio/adc/stm32-adc.c | 10 +- drivers/iio/adc/stm32-dfsdm-adc.c | 12 +- drivers/iio/adc/ti-ads1015.c | 5 +- drivers/iio/adc/twl6030-gpadc.c | 8 +- .../iio/common/inv_sensors/inv_sensors_timestamp.c | 33 +- drivers/iio/dac/ad9739a.c | 5 +- drivers/iio/dac/adi-axi-dac.c | 6 +- drivers/iio/imu/inv_icm42600/inv_icm42600.h | 35 ++ drivers/iio/imu/inv_icm42600/inv_icm42600_accel.c | 75 +++-- drivers/iio/imu/inv_icm42600/inv_icm42600_buffer.c | 31 +- drivers/iio/imu/inv_icm42600/inv_icm42600_core.c | 21 ++ drivers/iio/imu/inv_icm42600/inv_icm42600_gyro.c | 84 +++-- drivers/iio/imu/inv_icm42600/inv_icm42600_i2c.c | 3 + drivers/iio/imu/inv_icm42600/inv_icm42600_spi.c | 3 + drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c | 2 +- drivers/iio/industrialio-acpi.c | 85 +++++ drivers/iio/industrialio-backend.c | 162 ++++++--- drivers/iio/industrialio-buffer.c | 2 +- drivers/iio/light/apds9306.c | 12 +- drivers/iio/light/stk3310.c | 1 - drivers/iio/pressure/zpa2326.c | 10 +- drivers/iio/temperature/mcp9600.c | 3 +- include/linux/iio/backend.h | 74 ++-- include/linux/iio/common/inv_sensors_timestamp.h | 3 +- include/linux/iio/iio.h | 13 + 46 files changed, 1282 insertions(+), 406 deletions(-) create mode 100644 drivers/iio/industrialio-acpi.c