diff mbox series

[v2,13/19] iio: chemical: bme680: Add read buffers in union

Message ID 20240606212313.207550-16-vassilisamir@gmail.com (mailing list archive)
State Not Applicable
Headers show
Series None | expand

Commit Message

Vasileios Amoiridis June 6, 2024, 9:23 p.m. UTC 
Move the buffers that are used in order to read data from the
device in the union which handles all the device read/write
buffers. Also create defines for the number of bytes that are
being read from the device and don't use magic numbers.

Signed-off-by: Vasileios Amoiridis <vassilisamir@gmail.com>
---
 drivers/iio/chemical/bme680.h      |  7 +++++
 drivers/iio/chemical/bme680_core.c | 47 +++++++++++++++---------------
 2 files changed, 30 insertions(+), 24 deletions(-)

Comments

Vasileios Amoiridis June 7, 2024, 4:12 p.m. UTC | #1 
On Thu, Jun 06, 2024 at 11:23:07PM +0200, Vasileios Amoiridis wrote:
> Move the buffers that are used in order to read data from the
> device in the union which handles all the device read/write
> buffers. Also create defines for the number of bytes that are
> being read from the device and don't use magic numbers.
> 

Also this shouldn't have been here for the same reason. Ah, should
have been more careful...

The rest are fine though, so let me know and I submit a v3 with any
new potential changes.

Vasilis

> Signed-off-by: Vasileios Amoiridis <vassilisamir@gmail.com>
> ---
>  drivers/iio/chemical/bme680.h      |  7 +++++
>  drivers/iio/chemical/bme680_core.c | 47 +++++++++++++++---------------
>  2 files changed, 30 insertions(+), 24 deletions(-)
> 
> diff --git a/drivers/iio/chemical/bme680.h b/drivers/iio/chemical/bme680.h
> index 8d0f53c05d7d..7d0ff294725a 100644
> --- a/drivers/iio/chemical/bme680.h
> +++ b/drivers/iio/chemical/bme680.h
> @@ -56,6 +56,13 @@
>  #define   BME680_GAS_MEAS_BIT			BIT(6)
>  #define   BME680_MEAS_BIT			BIT(5)
>  
> +#define BME680_TEMP_NUM_BYTES			3
> +#define BME680_PRESS_NUM_BYTES			3
> +#define BME680_HUMID_NUM_BYTES			2
> +#define BME680_GAS_NUM_BYTES			2
> +
> +#define BME680_MEAS_TRIM_MASK			GENMASK(24, 4)
> +
>  /* Calibration Parameters */
>  #define BME680_T2_LSB_REG	0x8A
>  #define BME680_H2_MSB_REG	0xE1
> diff --git a/drivers/iio/chemical/bme680_core.c b/drivers/iio/chemical/bme680_core.c
> index b13797f7d873..3c33c21b5d6a 100644
> --- a/drivers/iio/chemical/bme680_core.c
> +++ b/drivers/iio/chemical/bme680_core.c
> @@ -111,10 +111,13 @@ struct bme680_data {
>  	s32 t_fine;
>  
>  	union {
> +		u8 buf[3];
> +		unsigned int check;
> +		__be16 be16;
>  		u8 bme680_cal_buf_1[BME680_CALIB_RANGE_1_LEN];
>  		u8 bme680_cal_buf_2[BME680_CALIB_RANGE_2_LEN];
>  		u8 bme680_cal_buf_3[BME680_CALIB_RANGE_3_LEN];
> -	}; 
> +	};
>  };
>  
>  static const struct regmap_range bme680_volatile_ranges[] = {
> @@ -449,7 +452,6 @@ static u8 bme680_oversampling_to_reg(u8 val)
>  static int bme680_wait_for_eoc(struct bme680_data *data)
>  {
>  	struct device *dev = regmap_get_device(data->regmap);
> -	unsigned int check;
>  	int ret;
>  	/*
>  	 * (Sum of oversampling ratios * time per oversampling) +
> @@ -462,16 +464,16 @@ static int bme680_wait_for_eoc(struct bme680_data *data)
>  
>  	usleep_range(wait_eoc_us, wait_eoc_us + 100);
>  
> -	ret = regmap_read(data->regmap, BME680_REG_MEAS_STAT_0, &check);
> +	ret = regmap_read(data->regmap, BME680_REG_MEAS_STAT_0, &data->check);
>  	if (ret) {
>  		dev_err(dev, "failed to read measurement status register.\n");
>  		return ret;
>  	}
> -	if (check & BME680_MEAS_BIT) {
> +	if (data->check & BME680_MEAS_BIT) {
>  		dev_err(dev, "Device measurement cycle incomplete.\n");
>  		return -EBUSY;
>  	}
> -	if (!(check & BME680_NEW_DATA_BIT)) {
> +	if (!(data->check & BME680_NEW_DATA_BIT)) {
>  		dev_err(dev, "No new data available from the device.\n");
>  		return -ENODATA;
>  	}
> @@ -560,7 +562,6 @@ static int bme680_read_temp(struct bme680_data *data, int *val)
>  {
>  	struct device *dev = regmap_get_device(data->regmap);
>  	int ret;
> -	__be32 tmp = 0;
>  	u32 adc_temp;
>  	s16 comp_temp;
>  
> @@ -574,13 +575,14 @@ static int bme680_read_temp(struct bme680_data *data, int *val)
>  		return ret;
>  
>  	ret = regmap_bulk_read(data->regmap, BME680_REG_TEMP_MSB,
> -			       &tmp, 3);
> +			       data->buf, BME680_TEMP_NUM_BYTES);
>  	if (ret < 0) {
>  		dev_err(dev, "failed to read temperature\n");
>  		return ret;
>  	}
>  
> -	adc_temp = be32_to_cpu(tmp) >> 12;
> +	adc_temp = FIELD_GET(BME680_MEAS_TRIM_MASK,
> +			     get_unaligned_be24(data->buf));
>  	if (adc_temp == BME680_MEAS_SKIPPED) {
>  		/* reading was skipped */
>  		dev_err(dev, "reading temperature skipped\n");
> @@ -606,7 +608,6 @@ static int bme680_read_press(struct bme680_data *data,
>  {
>  	struct device *dev = regmap_get_device(data->regmap);
>  	int ret;
> -	__be32 tmp = 0;
>  	u32 adc_press;
>  
>  	/* Read and compensate temperature to get a reading of t_fine */
> @@ -615,13 +616,14 @@ static int bme680_read_press(struct bme680_data *data,
>  		return ret;
>  
>  	ret = regmap_bulk_read(data->regmap, BME680_REG_PRESS_MSB,
> -			       &tmp, 3);
> +			       data->buf, BME680_PRESS_NUM_BYTES);
>  	if (ret < 0) {
>  		dev_err(dev, "failed to read pressure\n");
>  		return ret;
>  	}
>  
> -	adc_press = be32_to_cpu(tmp) >> 12;
> +	adc_press = FIELD_GET(BME680_MEAS_TRIM_MASK,
> +			      get_unaligned_be24(data->buf));
>  	if (adc_press == BME680_MEAS_SKIPPED) {
>  		/* reading was skipped */
>  		dev_err(dev, "reading pressure skipped\n");
> @@ -638,7 +640,6 @@ static int bme680_read_humid(struct bme680_data *data,
>  {
>  	struct device *dev = regmap_get_device(data->regmap);
>  	int ret;
> -	__be16 tmp = 0;
>  	u16 adc_humidity;
>  	u32 comp_humidity;
>  
> @@ -648,13 +649,13 @@ static int bme680_read_humid(struct bme680_data *data,
>  		return ret;
>  
>  	ret = regmap_bulk_read(data->regmap, BME680_REG_HUMIDITY_MSB,
> -			       &tmp, sizeof(tmp));
> +			       &data->be16, BME680_HUMID_NUM_BYTES);
>  	if (ret < 0) {
>  		dev_err(dev, "failed to read humidity\n");
>  		return ret;
>  	}
>  
> -	adc_humidity = be16_to_cpu(tmp);
> +	adc_humidity = be16_to_cpu(data->be16);
>  	if (adc_humidity == BME680_MEAS_SKIPPED) {
>  		/* reading was skipped */
>  		dev_err(dev, "reading humidity skipped\n");
> @@ -672,8 +673,6 @@ static int bme680_read_gas(struct bme680_data *data,
>  {
>  	struct device *dev = regmap_get_device(data->regmap);
>  	int ret;
> -	__be16 tmp = 0;
> -	unsigned int check;
>  	u16 adc_gas_res, gas_regs_val;
>  	u8 gas_range;
>  
> @@ -693,19 +692,20 @@ static int bme680_read_gas(struct bme680_data *data,
>  	if (ret)
>  		return ret;
>  
> -	ret = regmap_read(data->regmap, BME680_REG_MEAS_STAT_0, &check);
> -	if (check & BME680_GAS_MEAS_BIT) {
> +	ret = regmap_read(data->regmap, BME680_REG_MEAS_STAT_0, &data->check);
> +	if (data->check & BME680_GAS_MEAS_BIT) {
>  		dev_err(dev, "gas measurement incomplete\n");
>  		return -EBUSY;
>  	}
>  
>  	ret = regmap_bulk_read(data->regmap, BME680_REG_GAS_MSB,
> -			       &tmp, sizeof(tmp));
> +			       &data->be16, BME680_GAS_NUM_BYTES);
>  	if (ret < 0) {
>  		dev_err(dev, "failed to read gas resistance\n");
>  		return ret;
>  	}
> -	gas_regs_val = be16_to_cpu(tmp);
> +
> +	gas_regs_val = be16_to_cpu(data->be16);
>  	adc_gas_res = FIELD_GET(BME680_ADC_GAS_RES, gas_regs_val);
>  
>  	/*
> @@ -834,7 +834,6 @@ int bme680_core_probe(struct device *dev, struct regmap *regmap,
>  {
>  	struct iio_dev *indio_dev;
>  	struct bme680_data *data;
> -	unsigned int val;
>  	int ret;
>  
>  	indio_dev = devm_iio_device_alloc(dev, sizeof(*data));
> @@ -865,15 +864,15 @@ int bme680_core_probe(struct device *dev, struct regmap *regmap,
>  		return ret;
>  	}
>  
> -	ret = regmap_read(regmap, BME680_REG_CHIP_ID, &val);
> +	ret = regmap_read(regmap, BME680_REG_CHIP_ID, &data->check);
>  	if (ret < 0) {
>  		dev_err(dev, "Error reading chip ID\n");
>  		return ret;
>  	}
>  
> -	if (val != BME680_CHIP_ID_VAL) {
> +	if (data->check != BME680_CHIP_ID_VAL) {
>  		dev_err(dev, "Wrong chip ID, got %x expected %x\n",
> -			val, BME680_CHIP_ID_VAL);
> +			data->check, BME680_CHIP_ID_VAL);
>  		return -ENODEV;
>  	}
>  
> -- 
> 2.25.1
>
diff mbox series

Patch

diff --git a/drivers/iio/chemical/bme680.h b/drivers/iio/chemical/bme680.h
index 8d0f53c05d7d..7d0ff294725a 100644
--- a/drivers/iio/chemical/bme680.h
+++ b/drivers/iio/chemical/bme680.h
@@ -56,6 +56,13 @@ 
 #define   BME680_GAS_MEAS_BIT			BIT(6)
 #define   BME680_MEAS_BIT			BIT(5)
 
+#define BME680_TEMP_NUM_BYTES			3
+#define BME680_PRESS_NUM_BYTES			3
+#define BME680_HUMID_NUM_BYTES			2
+#define BME680_GAS_NUM_BYTES			2
+
+#define BME680_MEAS_TRIM_MASK			GENMASK(24, 4)
+
 /* Calibration Parameters */
 #define BME680_T2_LSB_REG	0x8A
 #define BME680_H2_MSB_REG	0xE1
diff --git a/drivers/iio/chemical/bme680_core.c b/drivers/iio/chemical/bme680_core.c
index b13797f7d873..3c33c21b5d6a 100644
--- a/drivers/iio/chemical/bme680_core.c
+++ b/drivers/iio/chemical/bme680_core.c
@@ -111,10 +111,13 @@  struct bme680_data {
 	s32 t_fine;
 
 	union {
+		u8 buf[3];
+		unsigned int check;
+		__be16 be16;
 		u8 bme680_cal_buf_1[BME680_CALIB_RANGE_1_LEN];
 		u8 bme680_cal_buf_2[BME680_CALIB_RANGE_2_LEN];
 		u8 bme680_cal_buf_3[BME680_CALIB_RANGE_3_LEN];
-	}; 
+	};
 };
 
 static const struct regmap_range bme680_volatile_ranges[] = {
@@ -449,7 +452,6 @@  static u8 bme680_oversampling_to_reg(u8 val)
 static int bme680_wait_for_eoc(struct bme680_data *data)
 {
 	struct device *dev = regmap_get_device(data->regmap);
-	unsigned int check;
 	int ret;
 	/*
 	 * (Sum of oversampling ratios * time per oversampling) +
@@ -462,16 +464,16 @@  static int bme680_wait_for_eoc(struct bme680_data *data)
 
 	usleep_range(wait_eoc_us, wait_eoc_us + 100);
 
-	ret = regmap_read(data->regmap, BME680_REG_MEAS_STAT_0, &check);
+	ret = regmap_read(data->regmap, BME680_REG_MEAS_STAT_0, &data->check);
 	if (ret) {
 		dev_err(dev, "failed to read measurement status register.\n");
 		return ret;
 	}
-	if (check & BME680_MEAS_BIT) {
+	if (data->check & BME680_MEAS_BIT) {
 		dev_err(dev, "Device measurement cycle incomplete.\n");
 		return -EBUSY;
 	}
-	if (!(check & BME680_NEW_DATA_BIT)) {
+	if (!(data->check & BME680_NEW_DATA_BIT)) {
 		dev_err(dev, "No new data available from the device.\n");
 		return -ENODATA;
 	}
@@ -560,7 +562,6 @@  static int bme680_read_temp(struct bme680_data *data, int *val)
 {
 	struct device *dev = regmap_get_device(data->regmap);
 	int ret;
-	__be32 tmp = 0;
 	u32 adc_temp;
 	s16 comp_temp;
 
@@ -574,13 +575,14 @@  static int bme680_read_temp(struct bme680_data *data, int *val)
 		return ret;
 
 	ret = regmap_bulk_read(data->regmap, BME680_REG_TEMP_MSB,
-			       &tmp, 3);
+			       data->buf, BME680_TEMP_NUM_BYTES);
 	if (ret < 0) {
 		dev_err(dev, "failed to read temperature\n");
 		return ret;
 	}
 
-	adc_temp = be32_to_cpu(tmp) >> 12;
+	adc_temp = FIELD_GET(BME680_MEAS_TRIM_MASK,
+			     get_unaligned_be24(data->buf));
 	if (adc_temp == BME680_MEAS_SKIPPED) {
 		/* reading was skipped */
 		dev_err(dev, "reading temperature skipped\n");
@@ -606,7 +608,6 @@  static int bme680_read_press(struct bme680_data *data,
 {
 	struct device *dev = regmap_get_device(data->regmap);
 	int ret;
-	__be32 tmp = 0;
 	u32 adc_press;
 
 	/* Read and compensate temperature to get a reading of t_fine */
@@ -615,13 +616,14 @@  static int bme680_read_press(struct bme680_data *data,
 		return ret;
 
 	ret = regmap_bulk_read(data->regmap, BME680_REG_PRESS_MSB,
-			       &tmp, 3);
+			       data->buf, BME680_PRESS_NUM_BYTES);
 	if (ret < 0) {
 		dev_err(dev, "failed to read pressure\n");
 		return ret;
 	}
 
-	adc_press = be32_to_cpu(tmp) >> 12;
+	adc_press = FIELD_GET(BME680_MEAS_TRIM_MASK,
+			      get_unaligned_be24(data->buf));
 	if (adc_press == BME680_MEAS_SKIPPED) {
 		/* reading was skipped */
 		dev_err(dev, "reading pressure skipped\n");
@@ -638,7 +640,6 @@  static int bme680_read_humid(struct bme680_data *data,
 {
 	struct device *dev = regmap_get_device(data->regmap);
 	int ret;
-	__be16 tmp = 0;
 	u16 adc_humidity;
 	u32 comp_humidity;
 
@@ -648,13 +649,13 @@  static int bme680_read_humid(struct bme680_data *data,
 		return ret;
 
 	ret = regmap_bulk_read(data->regmap, BME680_REG_HUMIDITY_MSB,
-			       &tmp, sizeof(tmp));
+			       &data->be16, BME680_HUMID_NUM_BYTES);
 	if (ret < 0) {
 		dev_err(dev, "failed to read humidity\n");
 		return ret;
 	}
 
-	adc_humidity = be16_to_cpu(tmp);
+	adc_humidity = be16_to_cpu(data->be16);
 	if (adc_humidity == BME680_MEAS_SKIPPED) {
 		/* reading was skipped */
 		dev_err(dev, "reading humidity skipped\n");
@@ -672,8 +673,6 @@  static int bme680_read_gas(struct bme680_data *data,
 {
 	struct device *dev = regmap_get_device(data->regmap);
 	int ret;
-	__be16 tmp = 0;
-	unsigned int check;
 	u16 adc_gas_res, gas_regs_val;
 	u8 gas_range;
 
@@ -693,19 +692,20 @@  static int bme680_read_gas(struct bme680_data *data,
 	if (ret)
 		return ret;
 
-	ret = regmap_read(data->regmap, BME680_REG_MEAS_STAT_0, &check);
-	if (check & BME680_GAS_MEAS_BIT) {
+	ret = regmap_read(data->regmap, BME680_REG_MEAS_STAT_0, &data->check);
+	if (data->check & BME680_GAS_MEAS_BIT) {
 		dev_err(dev, "gas measurement incomplete\n");
 		return -EBUSY;
 	}
 
 	ret = regmap_bulk_read(data->regmap, BME680_REG_GAS_MSB,
-			       &tmp, sizeof(tmp));
+			       &data->be16, BME680_GAS_NUM_BYTES);
 	if (ret < 0) {
 		dev_err(dev, "failed to read gas resistance\n");
 		return ret;
 	}
-	gas_regs_val = be16_to_cpu(tmp);
+
+	gas_regs_val = be16_to_cpu(data->be16);
 	adc_gas_res = FIELD_GET(BME680_ADC_GAS_RES, gas_regs_val);
 
 	/*
@@ -834,7 +834,6 @@  int bme680_core_probe(struct device *dev, struct regmap *regmap,
 {
 	struct iio_dev *indio_dev;
 	struct bme680_data *data;
-	unsigned int val;
 	int ret;
 
 	indio_dev = devm_iio_device_alloc(dev, sizeof(*data));
@@ -865,15 +864,15 @@  int bme680_core_probe(struct device *dev, struct regmap *regmap,
 		return ret;
 	}
 
-	ret = regmap_read(regmap, BME680_REG_CHIP_ID, &val);
+	ret = regmap_read(regmap, BME680_REG_CHIP_ID, &data->check);
 	if (ret < 0) {
 		dev_err(dev, "Error reading chip ID\n");
 		return ret;
 	}
 
-	if (val != BME680_CHIP_ID_VAL) {
+	if (data->check != BME680_CHIP_ID_VAL) {
 		dev_err(dev, "Wrong chip ID, got %x expected %x\n",
-			val, BME680_CHIP_ID_VAL);
+			data->check, BME680_CHIP_ID_VAL);
 		return -ENODEV;
 	}