diff mbox series

[v3,30/41] iio: light: isl29018: make use of regmap_clear_bits()

Message ID 20240617-review-v3-30-88d1338c4cca@baylibre.com (mailing list archive)
State Accepted
Headers show
Series iio: simplify with regmap_set_bits(), regmap_clear_bits() | expand

Commit Message

Trevor Gamblin June 17, 2024, 1:50 p.m. UTC
Instead of using regmap_update_bits() and passing val = 0, use
regmap_clear_bits().

Suggested-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Signed-off-by: Trevor Gamblin <tgamblin@baylibre.com>
---
 drivers/iio/light/isl29018.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
diff mbox series

Patch

diff --git a/drivers/iio/light/isl29018.c b/drivers/iio/light/isl29018.c
index 43484c18b101..8dfc750e68c0 100644
--- a/drivers/iio/light/isl29018.c
+++ b/drivers/iio/light/isl29018.c
@@ -550,9 +550,9 @@  static int isl29018_chip_init(struct isl29018_chip *chip)
 			return -ENODEV;
 
 		/* Clear brownout bit */
-		status = regmap_update_bits(chip->regmap,
-					    ISL29035_REG_DEVICE_ID,
-					    ISL29035_BOUT_MASK, 0);
+		status = regmap_clear_bits(chip->regmap,
+					   ISL29035_REG_DEVICE_ID,
+					   ISL29035_BOUT_MASK);
 		if (status < 0)
 			return status;
 	}