From patchwork Wed Jul 10 12:48:03 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Joshua Felmeden X-Patchwork-Id: 13729258 Received: from mail-wm1-f50.google.com (mail-wm1-f50.google.com [209.85.128.50]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 275CC1922DB for ; Wed, 10 Jul 2024 12:48:23 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=209.85.128.50 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1720615706; cv=none; b=tImMIup/u5ALfwJQEGFJCsjX6jExeL7QJu7NPsbQUqffqBomv9Lt/hcPNz/ZYf3H7E2y9Cg8i9EFe3dsbBd5G0tcS1MsmAJsBJuvrLm0YbU2e03nfr2WepWNX8G1THRJ9hPQzl6wuQ0vtBFzgBYXuaVt5e04Qfazxi7RVYQ+7oc= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1720615706; c=relaxed/simple; bh=ICLsqNvL10hXdLP4anyG8IgZQB0UXih4s9woLNjMGJc=; h=From:Date:Subject:MIME-Version:Content-Type:Message-Id:References: In-Reply-To:To:Cc; b=Zxf7wDkAzAGq0hIObPRNb/F8M6CjnGxqhRa24AeZtuPkA/6BjzTFophzi41kxhjAqo4ze0hy8zBWKsKQ4lBCPCLbvX4Kh0cDyrWX/dK2dF/xQtyv0wUN2wEEhJTF01qnf14U2ssnQkQDFb9LyrPbytazRa8qyFDjbAcE7lDwWsY= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=none (p=none dis=none) header.from=thegoodpenguin.co.uk; spf=pass smtp.mailfrom=thegoodpenguin.co.uk; dkim=pass (2048-bit key) header.d=thegoodpenguin-co-uk.20230601.gappssmtp.com header.i=@thegoodpenguin-co-uk.20230601.gappssmtp.com header.b=ujvIKcDk; arc=none smtp.client-ip=209.85.128.50 Authentication-Results: smtp.subspace.kernel.org; dmarc=none (p=none dis=none) header.from=thegoodpenguin.co.uk Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=thegoodpenguin.co.uk Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=thegoodpenguin-co-uk.20230601.gappssmtp.com header.i=@thegoodpenguin-co-uk.20230601.gappssmtp.com header.b="ujvIKcDk" Received: by mail-wm1-f50.google.com with SMTP id 5b1f17b1804b1-4257d5fc9b7so52312915e9.2 for ; Wed, 10 Jul 2024 05:48:23 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=thegoodpenguin-co-uk.20230601.gappssmtp.com; s=20230601; t=1720615702; x=1721220502; darn=vger.kernel.org; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:from:to:cc:subject:date:message-id :reply-to; bh=qd8lfk/DK5nljoGwbuoQZrtP2AYKa+u/2J2wl4uBopE=; b=ujvIKcDkIMFYhb0VPv5b75Gyrmz9Ljy/eh5HxV3zVmbTOUYgdnrTVbV6SQ8lUyfvTF jylOS5rcdfZoJ35FXz++/6GueueQJZGvUxdlYpUBHaPs6Ul0efWeUl9QQXH/SR1TaCSZ edmwMLZn2OtL+XKRsqQTvqkEujcM8Ll9tuQBEISL5aospvOVcxAjqCOmHR6tqJMAYe6P Tg8ifvcmqk9sDwVd07heP0t41U63dn/tIrHHmrfyrW5atn7LV6Hkdu6jheQ0SWqcnb4l qDa6qLaG2wncpPHNGgxocMOzCnCzCads3h4/LKjPLYR0EjK9FAeUJ2SCWQ7eA5PVil4/ 6V9w== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1720615702; x=1721220502; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=qd8lfk/DK5nljoGwbuoQZrtP2AYKa+u/2J2wl4uBopE=; b=duY/P2AqxUgskwZYs/bSKgekVC0OV0B1dYISH2O7RI570uSp5Db1rOmZPvsEvCHQiO iUoHJ69cUN2L2QbLe8DWmJ1aZMZJAwbpldDGFPNTVoEBo5xhtmZFB9Q3scp26bu2iQMp lFTUMOVq0wklzF0dGOGa88Zd233PbI0/cYFcGW737pXZUpzw8I2Jb1ftn6QJSL1RRgdw jINt7eIpauwxDSFerkLLoCyQtOX56byZYVzyf2HV607JI0KWyp3LCuxJ2fXOaGbcmpKP tCX7F/+Xjis5rf8SYr0DXom4bO/dKWLnYAQu/Mj8FszhV1r92hjdo2BzyJpzsNIGNM2P qQzw== X-Gm-Message-State: AOJu0YywH+HL2MybifIs+t1ZbBdinKmKTs3weaIWigRmFa/uwwQSeoL5 PyzIjK2Y3sAHJfRSJhIoyRArHdVtDV8PFMGPyhqHGs67PukXEPmJsSKC6c/DzWM= X-Google-Smtp-Source: AGHT+IGaC4d8YQKP4fRloL0gmKj5TXHGRUwhP1szuWm+VOGH2Gm+2W7Q8lfCH3XXRm+ElgFpCHwvew== X-Received: by 2002:adf:fd50:0:b0:367:9114:4693 with SMTP id ffacd0b85a97d-367cea91f0bmr4409870f8f.31.1720615702326; Wed, 10 Jul 2024 05:48:22 -0700 (PDT) Received: from carbon.local (aztw-29-b2-v4wan-166913-cust1764.vm26.cable.virginm.net. [82.37.38.229]) by smtp.gmail.com with ESMTPSA id 5b1f17b1804b1-4266ac156easm118051395e9.38.2024.07.10.05.48.21 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Wed, 10 Jul 2024 05:48:21 -0700 (PDT) From: Joshua Felmeden Date: Wed, 10 Jul 2024 13:48:03 +0100 Subject: [PATCH v2 2/2] iio: humidity: Add support for ENS21x Precedence: bulk X-Mailing-List: linux-iio@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Message-Id: <20240710-ens21x-v2-2-a37c22018b0c@thegoodpenguin.co.uk> References: <20240710-ens21x-v2-0-a37c22018b0c@thegoodpenguin.co.uk> In-Reply-To: <20240710-ens21x-v2-0-a37c22018b0c@thegoodpenguin.co.uk> To: Jonathan Cameron , Lars-Peter Clausen , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Joshua Felmeden Cc: linux-iio@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org X-Mailer: b4 0.14.0 X-Developer-Signature: v=1; a=ed25519-sha256; t=1720615699; l=11621; i=jfelmeden@thegoodpenguin.co.uk; s=20240709; h=from:subject:message-id; bh=ICLsqNvL10hXdLP4anyG8IgZQB0UXih4s9woLNjMGJc=; b=v+GmbBcVz4P/veqebW9/smRlocYCEac15rFLHXADcTpEM3g4IatWcu6Q7VV/CFeyVA6TZ9Oa0 LD81Uv1qvjUBOa0y7XlYCfPfww/sbHLB8vO4t5gjc3qv5aqwFVM0HbQ X-Developer-Key: i=jfelmeden@thegoodpenguin.co.uk; a=ed25519; pk=tePkZ5iJ3ejQ2O3vjhsj7GrLYcyJN1o1sMT3IEXvKo0= Add support for ENS210/ENS210A/ENS211/ENS212/ENS213A/ENS215. The ENS21x is a family of temperature and relative humidity sensors with accuracies tailored to the needs of specific applications. Signed-off-by: Joshua Felmeden --- drivers/iio/humidity/Kconfig | 11 ++ drivers/iio/humidity/Makefile | 1 + drivers/iio/humidity/ens21x.c | 346 ++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 358 insertions(+) diff --git a/drivers/iio/humidity/Kconfig b/drivers/iio/humidity/Kconfig index b15b7a3b66d5..ff62abf730d1 100644 --- a/drivers/iio/humidity/Kconfig +++ b/drivers/iio/humidity/Kconfig @@ -25,6 +25,17 @@ config DHT11 Other sensors should work as well as long as they speak the same protocol. +config ENS21X + tristate "ENS21X temperature and humidity sensor" + depends on I2C + help + Say yes here to get support for the ScioSense ENS21X family of + humidity and temperature sensors. + + This driver can also be built as a module. If so, the module will be + called ens21x. + + config HDC100X tristate "TI HDC100x relative humidity and temperature sensor" depends on I2C diff --git a/drivers/iio/humidity/Makefile b/drivers/iio/humidity/Makefile index 5fbeef299f61..26590d06d11f 100644 --- a/drivers/iio/humidity/Makefile +++ b/drivers/iio/humidity/Makefile @@ -5,6 +5,7 @@ obj-$(CONFIG_AM2315) += am2315.o obj-$(CONFIG_DHT11) += dht11.o +obj-$(CONFIG_ENS21X) += ens21x.o obj-$(CONFIG_HDC100X) += hdc100x.o obj-$(CONFIG_HDC2010) += hdc2010.o obj-$(CONFIG_HDC3020) += hdc3020.o diff --git a/drivers/iio/humidity/ens21x.c b/drivers/iio/humidity/ens21x.c new file mode 100644 index 000000000000..7b2e279d1559 --- /dev/null +++ b/drivers/iio/humidity/ens21x.c @@ -0,0 +1,346 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * ens21x.c - Support for ScioSense ens21x + * temperature & humidity sensor + * + * (7-bit I2C slave address 0x43 ENS210) + * (7-bit I2C slave address 0x43 ENS210A) + * (7-bit I2C slave address 0x44 ENS211) + * (7-bit I2C slave address 0x45 ENS212) + * (7-bit I2C slave address 0x46 ENS213A) + * (7-bit I2C slave address 0x47 ENS215) + * + * Datasheet: + * https://www.sciosense.com/wp-content/uploads/2024/04/ENS21x-Datasheet.pdf + * https://www.sciosense.com/wp-content/uploads/2023/12/ENS210-Datasheet.pdf + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* register definitions */ +#define ENS21X_REG_PART_ID 0x00 +#define ENS21X_REG_DIE_REV 0x02 +#define ENS21X_REG_UID 0x04 +#define ENS21X_REG_SYS_CTRL 0x10 +#define ENS21X_REG_SYS_STAT 0x11 +#define ENS21X_REG_SENS_RUN 0x21 +#define ENS21X_REG_SENS_START 0x22 +#define ENS21X_REG_SENS_STOP 0x23 +#define ENS21X_REG_SENS_STAT 0x24 +#define ENS21X_REG_T_VAL 0x30 +#define ENS21X_REG_H_VAL 0x33 + +/* value definitions */ +#define ENS21X_SENS_START_T_START BIT(0) +#define ENS21X_SENS_START_H_START BIT(1) + +#define ENS21X_SENS_STAT_T_ACTIVE BIT(0) +#define ENS21X_SENS_STAT_H_ACTIVE BIT(1) + +#define ENS21X_SYS_CTRL_LOW_POWER_ENABLE BIT(0) +#define ENS21X_SYS_CTRL_SYS_RESET BIT(7) + +#define ENS21X_SYS_STAT_SYS_ACTIVE BIT(0) + +/* magic constants */ +#define ENS21X_CONST_TEMP_SCALE_INT 15 /* integer part of temperature scale (1/64) */ +#define ENS21X_CONST_TEMP_SCALE_DEC 625000 /* decimal part of temperature scale */ +#define ENS21X_CONST_HUM_SCALE_INT 1 /* integer part of humidity scale (1/512) */ +#define ENS21X_CONST_HUM_SCALE_DEC 953125 /* decimal part of humidity scale */ +#define ENS21X_CONST_TEMP_OFFSET_INT -17481 /* temperature offset (64 * -273.15) */ +#define ENS21X_CONST_TEMP_OFFSET_DEC 600000 /* decimal part of offset */ +#define ENS210_CONST_CONVERSION_TIME 130 +#define ENS212_CONST_CONVERSION_TIME 32 +#define ENS215_CONST_CONVERSION_TIME 132 + +static const struct of_device_id ens21x_of_match[]; + +struct ens21x_dev { + struct i2c_client *client; + struct mutex lock; + int part_id; +}; + +enum ens21x_partnumber { + ENS210 = 0x0210, + ENS210A = 0xa210, + ENS211 = 0x0211, + ENS212 = 0x0212, + ENS213A = 0xa213, + ENS215 = 0x0215, +}; + +/* calculate 17-bit crc7 */ +static u8 ens21x_crc7(u32 val) +{ + u32 val_be = (htonl(val & 0x1ffff) >> 0x8); + + return crc7_be(0xde, (u8 *)&val_be, 3) >> 1; +} + +static int ens21x_get_measurement(struct iio_dev *indio_dev, bool temp, int *val) +{ + u32 regval, regval_le; + int ret, tries; + struct ens21x_dev *dev_data = iio_priv(indio_dev); + + /* assert read */ + i2c_smbus_write_byte_data(dev_data->client, ENS21X_REG_SENS_START, + temp ? ENS21X_SENS_START_T_START : + ENS21X_SENS_START_H_START); + + /* wait for conversion to be ready */ + switch (dev_data->part_id) { + case ENS210: + case ENS210A: + msleep(ENS210_CONST_CONVERSION_TIME); + break; + case ENS211: + case ENS212: + msleep(ENS212_CONST_CONVERSION_TIME); + break; + case ENS213A: + case ENS215: + msleep(ENS215_CONST_CONVERSION_TIME); + break; + default: + dev_err(&dev_data->client->dev, "unrecognised device"); + return -ENODEV; + } + + tries = 10; + while (tries-- > 0) { + usleep_range(4000, 5000); + ret = i2c_smbus_read_byte_data(dev_data->client, + ENS21X_REG_SENS_STAT); + if (ret < 0) + continue; + if (!(ret & (temp ? ENS21X_SENS_STAT_T_ACTIVE : + ENS21X_SENS_STAT_H_ACTIVE))) + break; + } + if (tries < 0) { + dev_err(&indio_dev->dev, "timeout waiting for sensor reading\n"); + return -EIO; + } + + /* perform read */ + ret = i2c_smbus_read_i2c_block_data( + dev_data->client, temp ? ENS21X_REG_T_VAL : ENS21X_REG_H_VAL, 3, + (u8 *)®val_le); + if (ret < 0) { + dev_err(&dev_data->client->dev, "failed to read register"); + return -EIO; + } else if (ret == 3) { + regval = le32_to_cpu(regval_le); + if (ens21x_crc7(regval) == ((regval >> 17) & 0x7f)) { + *val = regval & 0xffff; + return IIO_VAL_INT; + } + /* crc fail */ + dev_err(&indio_dev->dev, "ens invalid crc\n"); + return -EIO; + } + + dev_err(&indio_dev->dev, "expected 3 bytes, received %d\n", ret); + return -EIO; +} + +static int ens21x_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *channel, int *val, + int *val2, long mask) +{ + struct ens21x_dev *dev_data = iio_priv(indio_dev); + int ret = -EINVAL; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + mutex_lock(&dev_data->lock); + ret = ens21x_get_measurement( + indio_dev, channel->type == IIO_TEMP, val); + mutex_unlock(&dev_data->lock); + break; + case IIO_CHAN_INFO_SCALE: + if (channel->type == IIO_TEMP) { + *val = ENS21X_CONST_TEMP_SCALE_INT; + *val2 = ENS21X_CONST_TEMP_SCALE_DEC; + } else { + *val = ENS21X_CONST_HUM_SCALE_INT; + *val2 = ENS21X_CONST_HUM_SCALE_DEC; + } + ret = IIO_VAL_INT_PLUS_MICRO; + break; + case IIO_CHAN_INFO_OFFSET: + if (channel->type == IIO_TEMP) { + *val = ENS21X_CONST_TEMP_OFFSET_INT; + *val2 = ENS21X_CONST_TEMP_OFFSET_DEC; + ret = IIO_VAL_INT_PLUS_MICRO; + break; + } + *val = 0; + ret = IIO_VAL_INT; + break; + default: + break; + } + return ret; +} + +static const struct iio_chan_spec ens21x_channels[] = { + /* Temperature channel */ + { + .type = IIO_TEMP, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_SCALE) | + BIT(IIO_CHAN_INFO_OFFSET), + }, + /* Humidity channel */ + { + .type = IIO_HUMIDITYRELATIVE, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_SCALE) | + BIT(IIO_CHAN_INFO_OFFSET), + } +}; + +static const struct iio_info ens21x_info = { + .read_raw = ens21x_read_raw, +}; + +static int ens21x_probe(struct i2c_client *client) +{ + const struct i2c_device_id *id = i2c_client_get_device_id(client); + const struct of_device_id *match; + struct ens21x_dev *dev_data; + struct iio_dev *indio_dev; + uint16_t part_id_le, part_id; + int ret, tries; + + if (!i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_WRITE_BYTE_DATA | + I2C_FUNC_SMBUS_WRITE_BYTE | + I2C_FUNC_SMBUS_READ_I2C_BLOCK)) { + dev_err(&client->dev, + "adapter does not support some i2c transactions\n"); + return -EOPNOTSUPP; + } + + match = i2c_of_match_device(ens21x_of_match, client); + if (!match) + return -ENODEV; + + indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*dev_data)); + if (!indio_dev) + return -ENOMEM; + + dev_data = iio_priv(indio_dev); + i2c_set_clientdata(client, indio_dev); + dev_data->client = client; + mutex_init(&dev_data->lock); + + /* reset device */ + ret = i2c_smbus_write_byte_data(client, ENS21X_REG_SYS_CTRL, + ENS21X_SYS_CTRL_SYS_RESET); + if (ret) + return ret; + + /* wait for device to become active */ + usleep_range(4000, 5000); + + /* disable low power mode */ + ret = i2c_smbus_write_byte_data(client, ENS21X_REG_SYS_CTRL, 0x00); + if (ret) + return ret; + + /* wait for device to become active */ + tries = 10; + while (tries-- > 0) { + msleep(20); + ret = i2c_smbus_read_byte_data(client, ENS21X_REG_SYS_STAT); + if (ret < 0) + return ret; + if (ret & ENS21X_SYS_STAT_SYS_ACTIVE) + break; + } + if (tries < 0) { + dev_err(&client->dev, + "timeout waiting for ens21x to become active\n"); + return -EIO; + } + + /* get part_id */ + part_id_le = i2c_smbus_read_word_data(client, ENS21X_REG_PART_ID); + if (part_id_le < 0) + return part_id_le; + part_id = le16_to_cpu(part_id_le); + + if (part_id != id->driver_data) { + dev_err(&client->dev, + "Part ID does not match (0x%04x != 0x%04lx)\n", part_id, + id->driver_data); + return -ENODEV; + } + + /* reenable low power */ + ret = i2c_smbus_write_byte_data(client, ENS21X_REG_SYS_CTRL, + ENS21X_SYS_CTRL_LOW_POWER_ENABLE); + if (ret) + return ret; + + dev_data->part_id = part_id; + + indio_dev->name = id->name; + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->channels = ens21x_channels; + indio_dev->num_channels = ARRAY_SIZE(ens21x_channels); + indio_dev->info = &ens21x_info; + + return devm_iio_device_register(&client->dev, indio_dev); +} + + +static const struct of_device_id ens21x_of_match[] = { + { .compatible = "sciosense,ens210", .data = (void *)ENS210}, + { .compatible = "sciosense,ens210a", .data = (void *)ENS210A }, + { .compatible = "sciosense,ens211", .data = (void *)ENS211}, + { .compatible = "sciosense,ens212", .data = (void *)ENS212}, + { .compatible = "sciosense,ens213a", .data = (void *)ENS213A }, + { .compatible = "sciosense,ens215", .data = (void *)ENS215}, + {}, +}; +MODULE_DEVICE_TABLE(of, ens21x_of_match); + +static const struct i2c_device_id ens21x_id[] = { + {"ens210", ENS210}, + {"ens210a", ENS210A}, + {"ens211", ENS211}, + {"ens212", ENS212}, + {"ens213a", ENS213A}, + {"ens215", ENS215}, + {} +}; +MODULE_DEVICE_TABLE(i2c, ens21x_id); + +static struct i2c_driver ens21x_driver = { + .probe = ens21x_probe, + .id_table = ens21x_id, + .driver = { + .name = "ens21x", + .of_match_table = ens21x_of_match, + }, +}; + +module_i2c_driver(ens21x_driver); + +MODULE_DESCRIPTION("ScioSense ENS21x temperature and humidity sensor driver"); +MODULE_AUTHOR("Joshua Felmeden "); +MODULE_LICENSE("GPL"); +