@@ -35,6 +35,7 @@
#define STK3310_STATE_EN_ALS BIT(1)
#define STK3310_STATE_STANDBY 0x00
+#define STK3013_CHIP_ID_VAL 0x31
#define STK3310_CHIP_ID_VAL 0x13
#define STK3311_CHIP_ID_VAL 0x1D
#define STK3311A_CHIP_ID_VAL 0x15
@@ -84,6 +85,7 @@ static const struct reg_field stk3310_reg_field_flag_nf =
REG_FIELD(STK3310_REG_FLAG, 0, 0);
static const u8 stk3310_chip_ids[] = {
+ STK3013_CHIP_ID_VAL,
STK3310_CHIP_ID_VAL,
STK3311A_CHIP_ID_VAL,
STK3311S34_CHIP_ID_VAL,
@@ -700,6 +702,7 @@ static DEFINE_SIMPLE_DEV_PM_OPS(stk3310_pm_ops, stk3310_suspend,
stk3310_resume);
static const struct i2c_device_id stk3310_i2c_id[] = {
+ { "STK3013" },
{ "STK3310" },
{ "STK3311" },
{ "STK3335" },
@@ -708,6 +711,7 @@ static const struct i2c_device_id stk3310_i2c_id[] = {
MODULE_DEVICE_TABLE(i2c, stk3310_i2c_id);
static const struct acpi_device_id stk3310_acpi_id[] = {
+ {"STK3013", 0},
{"STK3310", 0},
{"STK3311", 0},
{}
@@ -716,6 +720,7 @@ static const struct acpi_device_id stk3310_acpi_id[] = {
MODULE_DEVICE_TABLE(acpi, stk3310_acpi_id);
static const struct of_device_id stk3310_of_match[] = {
+ { .compatible = "sensortek,stk3013", },
{ .compatible = "sensortek,stk3310", },
{ .compatible = "sensortek,stk3311", },
{ .compatible = "sensortek,stk3335", },
Add support for Sensortek's STK3013 in the driver. The part bears the product ID 0x31. As seen in [1], Sensortek lists STK3013 as a proximity sensor. But it has been experimentally observed that they do have ambient light sensing capabilities. Furthermore, [2] implements a proximity and ambient light sensor driver for STK3x1x devices, which is also indicative of the fact that these parts are also ambient light sensors. [1] https://www.sensortek.com.tw/index.php/en/products/optical-sensor/ [2] https://android.googlesource.com/kernel/msm.git/+/e6dfa4641d88201e8019be19ff557e5d2cf4572f Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org> --- drivers/iio/light/stk3310.c | 5 +++++ 1 file changed, 5 insertions(+)