diff mbox series

[V4,05/15] dt-bindings: power: supply: axp20x: Add input-current-limit-microamp

Message ID 20240821215456.962564-6-macroalpha82@gmail.com (mailing list archive)
State Handled Elsewhere
Headers show
Series Add Battery and USB Supply for AXP717 | expand

Commit Message

Chris Morgan Aug. 21, 2024, 9:54 p.m. UTC 
From: Chris Morgan <macromorgan@hotmail.com>

Allow specifying a hard limit of the maximum input current. Some PMICs
such as the AXP717 can pull up to 3.25A, so allow a value to be
specified that clamps this in the event the hardware is not designed
for it.

Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
---
 .../x-powers,axp20x-usb-power-supply.yaml     | 58 ++++++++++++++++++-
 1 file changed, 55 insertions(+), 3 deletions(-)

Comments

Krzysztof Kozlowski Aug. 22, 2024, 7:04 a.m. UTC | #1 
On Wed, Aug 21, 2024 at 04:54:46PM -0500, Chris Morgan wrote:
> From: Chris Morgan <macromorgan@hotmail.com>
> 
> Allow specifying a hard limit of the maximum input current. Some PMICs
> such as the AXP717 can pull up to 3.25A, so allow a value to be
> specified that clamps this in the event the hardware is not designed
> for it.
> 
> Signed-off-by: Chris Morgan <macromorgan@hotmail.com>

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/power/supply/x-powers,axp20x-usb-power-supply.yaml b/Documentation/devicetree/bindings/power/supply/x-powers,axp20x-usb-power-supply.yaml
index 34b7959d6772..ab24ebf2852f 100644
--- a/Documentation/devicetree/bindings/power/supply/x-powers,axp20x-usb-power-supply.yaml
+++ b/Documentation/devicetree/bindings/power/supply/x-powers,axp20x-usb-power-supply.yaml
@@ -15,9 +15,6 @@  maintainers:
   - Chen-Yu Tsai <wens@csie.org>
   - Sebastian Reichel <sre@kernel.org>
 
-allOf:
-  - $ref: power-supply.yaml#
-
 properties:
   compatible:
     oneOf:
@@ -31,8 +28,63 @@  properties:
           - const: x-powers,axp803-usb-power-supply
           - const: x-powers,axp813-usb-power-supply
 
+  input-current-limit-microamp:
+    description:
+      Optional value to clamp the maximum input current limit to for
+      the device. If omitted, the programmed value from the EFUSE will
+      be used.
+    minimum: 100000
+    maximum: 4000000
 
 required:
   - compatible
 
+allOf:
+  - $ref: power-supply.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - x-powers,axp192-usb-power-supply
+    then:
+      properties:
+        input-current-limit-microamp:
+          enum: [100000, 500000]
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - x-powers,axp202-usb-power-supply
+              - x-powers,axp223-usb-power-supply
+    then:
+      properties:
+        input-current-limit-microamp:
+          enum: [100000, 500000, 900000]
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - x-powers,axp221-usb-power-supply
+    then:
+      properties:
+        input-current-limit-microamp:
+          enum: [500000, 900000]
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - x-powers,axp813-usb-power-supply
+    then:
+      properties:
+        input-current-limit-microamp:
+          enum: [100000, 500000, 900000, 1500000, 2000000, 2500000,
+                 3000000, 3500000, 4000000]
+
 additionalProperties: false