From patchwork Sat Sep 14 00:28:59 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Vasileios Amoiridis X-Patchwork-Id: 13804132 Received: from mail-ed1-f46.google.com (mail-ed1-f46.google.com [209.85.208.46]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id B5BB779F6; Sat, 14 Sep 2024 00:29:09 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=209.85.208.46 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1726273752; cv=none; b=DoPi25zByEBX0EwXeaodNZUAyZp452NHmnfu5YAJy7ySuhwCwrSh5J9AVA8w9MaZeHocY6US41qmsVm/qXWupTIoa21Lo8JPkqNg1sHKFLtvA+FVnsZpUCQCwWhe0m8fMKzB9BoQACvA8zAimfqTNFByzWUHs2hnZfv//odPMuE= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1726273752; c=relaxed/simple; bh=GbA0gjji055dHjx+7A0z3FD74Sx7Dq30g7Be27Ov1Vw=; h=From:To:Cc:Subject:Date:Message-Id:In-Reply-To:References: MIME-Version; b=RVyHPEDDUkBsYnDq7W758nuDmcnGTnPEtYDxrIpLOmqVUd6XljfEpld1VAGRxQrEyqQJ6m+xDxr3q0kzXJinS5XO1vsSAGcjM8D4EUQs10CsrGWkPXhyHKeZ1DryTjJOOozS1SQOEL3d09D94UITEZESyqsOAHqcHblen12uSZ8= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=gmail.com; spf=pass smtp.mailfrom=gmail.com; dkim=pass (2048-bit key) header.d=gmail.com header.i=@gmail.com header.b=cwC9zj+t; arc=none smtp.client-ip=209.85.208.46 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=gmail.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=gmail.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=gmail.com header.i=@gmail.com header.b="cwC9zj+t" Received: by mail-ed1-f46.google.com with SMTP id 4fb4d7f45d1cf-5c255e3c327so3089150a12.1; Fri, 13 Sep 2024 17:29:09 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20230601; t=1726273748; x=1726878548; darn=vger.kernel.org; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:from:to:cc:subject:date :message-id:reply-to; bh=MYlso/8R0sVW3aJqtei6eUBHEzKAZZG3JvkFLdErIqQ=; b=cwC9zj+tseMG2Cl9aDx4is4OJyYQHCYyFbgSdLMGd9G8g0CMNu7jS5xiQxlOsay2zW WEHtL/bwP8X5miLRF1U7KijzWDiJwgT0jy6Ml6g0mSHey7SEW/9NYlqeBD9wiyd53uKB SmAkEN/UgYY/qvI0DnFIdRQen+R+7wHi8Xyn42T/hOYpJZvQwrdljoCZLqhrtC8Zb6BT bXm0By5DtMNEkXCfm/r/BRb9oMGTy+M3rU/G4luZorH4w3Iee5XtJgYbiggcRn7rvEJ1 V5Kce0wEBt2TvkMP3l/Ha9ohu9htYMDHgwEYr59hwUauRGn7fnl0n/X+c6D3TP/k2erD cKYQ== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1726273748; x=1726878548; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=MYlso/8R0sVW3aJqtei6eUBHEzKAZZG3JvkFLdErIqQ=; b=r+wKZxEGp2Ytk5QIIBvUfpL3JYGVxiVXX2+W0evNoQnBWYaavKOWlEupiyWH8lpUa6 yQOKu4Pmna1888bouD/MDHUBG2DYd7oLo1/Pgoq0v0noP4evaTUYvdCEoLaXiOGCbPHq V8WoUxBGJpbIrSwflrezBokf21l5TukecbbqeoSH6ztc37Z0Bl5RFgsu+lA3LIz8wc0y Qi62p+nAT80xTu7RoWp18pFqq7N8PSjual+5yfYY9Y9QZWiCMHOh8SVaOQySZR+9sOPO 7/+5LfZTEqrZRHmz1WiR7H7SdqnE/cNCruBdNhp3UUt3K6qT5ouVq1xgrLIUOWZiMLuF M4vg== X-Forwarded-Encrypted: i=1; AJvYcCUTBSl20Eb2MUPdxBakp8JO+jEL/59xDLrLSsx0FLzGb/Dg9KnMp61/AvmxlBb2ehqLM9UmsMZYLEiXIuaq@vger.kernel.org, AJvYcCV6OowPe2JwfOxMkPI4fEW9ESAw0WR8UPjdT1REC9KxdLr0XkD0UrJpYFtQOJEN/+o/hTWwfDSc1WBy@vger.kernel.org, AJvYcCWheepl3yS29bDH/wxhwnPFeZ/7T+SMOgCLka0b+7nRRdb1IjCIpDugxlsoKCRylaQtFsMJierjxUhD@vger.kernel.org X-Gm-Message-State: AOJu0YzSZdXRU/q/OedOmSOAEydZL/2CU9nCzEGe+p6EyquZ1Vy9+xWt gh/E9wqZrvEO1s7yWPgU9R/YUTFh+kydpjkkCfsGoOQ8w0B8tngE X-Google-Smtp-Source: AGHT+IGkgKNWnFxVJdIUWkHFGUHXu6nH9fwnAMdXGyAaop+4/YyIyrHR4F3vQ6awTO2vakO/WXQQBg== X-Received: by 2002:a17:907:1c1a:b0:a86:97c0:9bb3 with SMTP id a640c23a62f3a-a902961741bmr835655166b.51.1726273747750; Fri, 13 Sep 2024 17:29:07 -0700 (PDT) Received: from localhost.localdomain ([2a04:ee41:82:7577:6bd1:9a24:6b02:4a8f]) by smtp.gmail.com with ESMTPSA id a640c23a62f3a-a90610f43f4sm15157666b.80.2024.09.13.17.29.06 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Fri, 13 Sep 2024 17:29:07 -0700 (PDT) From: Vasileios Amoiridis To: jic23@kernel.org, lars@metafoo.de, robh@kernel.org, krzk+dt@kernel.org, conor+dt@kernel.org, andriy.shevchenko@linux.intel.com Cc: vassilisamir@gmail.com, ang.iglesiasg@gmail.com, linus.walleij@linaro.org, biju.das.jz@bp.renesas.com, javier.carrasco.cruz@gmail.com, semen.protsenko@linaro.org, 579lpy@gmail.com, ak@it-klinger.de, linux-iio@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, christophe.jaillet@wanadoo.fr Subject: [PATCH v7 3/4] iio: pressure: bmp280: Add data ready trigger support Date: Sat, 14 Sep 2024 02:28:59 +0200 Message-Id: <20240914002900.45158-4-vassilisamir@gmail.com> X-Mailer: git-send-email 2.25.1 In-Reply-To: <20240914002900.45158-1-vassilisamir@gmail.com> References: <20240914002900.45158-1-vassilisamir@gmail.com> Precedence: bulk X-Mailing-List: linux-iio@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 The BMP3xx and BMP5xx sensors have an interrupt pin which can be used as a trigger for when there are data ready in the sensor for pick up. This use case is used along with NORMAL_MODE in the sensor, which allows the sensor to do consecutive measurements depending on the ODR rate value. The trigger pin can be configured to be open-drain or push-pull and either rising or falling edge. No support is added yet for interrupts for FIFO, WATERMARK and out of range values. Reviewed-by: Andy Shevchenko Signed-off-by: Vasileios Amoiridis --- drivers/iio/pressure/bmp280-core.c | 225 ++++++++++++++++++++++++++++- drivers/iio/pressure/bmp280.h | 21 +++ 2 files changed, 244 insertions(+), 2 deletions(-) diff --git a/drivers/iio/pressure/bmp280-core.c b/drivers/iio/pressure/bmp280-core.c index 64fb2d720bec..58ff77cbee64 100644 --- a/drivers/iio/pressure/bmp280-core.c +++ b/drivers/iio/pressure/bmp280-core.c @@ -42,12 +42,14 @@ #include #include #include +#include #include #include #include #include #include +#include #include #include @@ -1278,6 +1280,63 @@ static irqreturn_t bme280_trigger_handler(int irq, void *p) return IRQ_HANDLED; } +static int __bmp280_trigger_probe(struct iio_dev *indio_dev, + const struct iio_trigger_ops *trigger_ops, + int (*int_pin_config)(struct bmp280_data *data), + irq_handler_t irq_thread_handler) +{ + struct bmp280_data *data = iio_priv(indio_dev); + struct device *dev = data->dev; + u32 irq_type; + int ret, irq; + + irq = fwnode_irq_get(dev_fwnode(dev), 0); + if (irq < 0) + return dev_err_probe(dev, irq, "No interrupt found.\n"); + + irq_type = irq_get_trigger_type(irq); + switch (irq_type) { + case IRQF_TRIGGER_RISING: + data->trig_active_high = true; + break; + case IRQF_TRIGGER_FALLING: + data->trig_active_high = false; + break; + default: + return dev_err_probe(dev, -EINVAL, "Invalid interrupt type specified.\n"); + } + + data->trig_open_drain = + fwnode_property_read_bool(dev_fwnode(dev), "int-open-drain"); + + ret = int_pin_config(data); + if (ret) + return ret; + + data->trig = devm_iio_trigger_alloc(data->dev, "%s-dev%d", + indio_dev->name, + iio_device_id(indio_dev)); + if (!data->trig) + return -ENOMEM; + + data->trig->ops = trigger_ops; + iio_trigger_set_drvdata(data->trig, data); + + ret = devm_request_threaded_irq(data->dev, irq, NULL, + irq_thread_handler, IRQF_ONESHOT, + indio_dev->name, indio_dev); + if (ret) + return dev_err_probe(dev, ret, "request IRQ failed.\n"); + + ret = devm_iio_trigger_register(data->dev, data->trig); + if (ret) + return dev_err_probe(dev, ret, "iio trigger register failed.\n"); + + indio_dev->trig = iio_trigger_get(data->trig); + + return 0; +} + static const u8 bme280_chip_ids[] = { BME280_CHIP_ID }; static const int bme280_humid_coeffs[] = { 1000, 1024 }; @@ -1779,6 +1838,81 @@ static int bmp380_chip_config(struct bmp280_data *data) return ret; } +static void bmp380_trigger_reenable(struct iio_trigger *trig) +{ + struct bmp280_data *data = iio_trigger_get_drvdata(trig); + unsigned int tmp; + int ret; + + ret = regmap_read(data->regmap, BMP380_REG_INT_STATUS, &tmp); + if (ret) + dev_err(data->dev, "Failed to reset interrupt.\n"); +} + +static int bmp380_data_rdy_trigger_set_state(struct iio_trigger *trig, + bool state) +{ + struct bmp280_data *data = iio_trigger_get_drvdata(trig); + int ret; + + guard(mutex)(&data->lock); + + ret = regmap_update_bits(data->regmap, BMP380_REG_INT_CONTROL, + BMP380_INT_CTRL_DRDY_EN, + FIELD_PREP(BMP380_INT_CTRL_DRDY_EN, !!state)); + if (ret) + dev_err(data->dev, + "Could not %s interrupt.\n", str_enable_disable(state)); + return ret; +} + +static const struct iio_trigger_ops bmp380_trigger_ops = { + .set_trigger_state = &bmp380_data_rdy_trigger_set_state, + .reenable = &bmp380_trigger_reenable, +}; + +static int bmp380_int_pin_config(struct bmp280_data *data) +{ + int pin_drive_cfg = FIELD_PREP(BMP380_INT_CTRL_OPEN_DRAIN, + data->trig_open_drain); + int pin_level_cfg = FIELD_PREP(BMP380_INT_CTRL_LEVEL, + data->trig_active_high); + int ret, int_pin_cfg = pin_drive_cfg | pin_level_cfg; + + ret = regmap_update_bits(data->regmap, BMP380_REG_INT_CONTROL, + BMP380_INT_CTRL_SETTINGS_MASK, int_pin_cfg); + if (ret) + dev_err(data->dev, "Could not set interrupt settings.\n"); + + return ret; +} + +static irqreturn_t bmp380_irq_thread_handler(int irq, void *p) +{ + struct iio_dev *indio_dev = p; + struct bmp280_data *data = iio_priv(indio_dev); + unsigned int int_ctrl; + int ret; + + scoped_guard(mutex, &data->lock) { + ret = regmap_read(data->regmap, BMP380_REG_INT_STATUS, &int_ctrl); + if (ret) + return IRQ_NONE; + } + + if (FIELD_GET(BMP380_INT_STATUS_DRDY, int_ctrl)) + iio_trigger_poll_nested(data->trig); + + return IRQ_HANDLED; +} + +static int bmp380_trigger_probe(struct iio_dev *indio_dev) +{ + return __bmp280_trigger_probe(indio_dev, &bmp380_trigger_ops, + bmp380_int_pin_config, + bmp380_irq_thread_handler); +} + static irqreturn_t bmp380_trigger_handler(int irq, void *p) { struct iio_poll_func *pf = p; @@ -1873,6 +2007,7 @@ const struct bmp280_chip_info bmp380_chip_info = { .wait_conv = bmp380_wait_conv, .preinit = bmp380_preinit, + .trigger_probe = bmp380_trigger_probe, .trigger_handler = bmp380_trigger_handler, }; EXPORT_SYMBOL_NS(bmp380_chip_info, IIO_BMP280); @@ -2420,6 +2555,88 @@ static int bmp580_chip_config(struct bmp280_data *data) return 0; } +static void bmp580_trigger_reenable(struct iio_trigger *trig) +{ + struct bmp280_data *data = iio_trigger_get_drvdata(trig); + unsigned int tmp; + int ret; + + ret = regmap_read(data->regmap, BMP580_REG_INT_STATUS, &tmp); + if (ret) + dev_err(data->dev, "Failed to reset interrupt.\n"); +} + +static int bmp580_data_rdy_trigger_set_state(struct iio_trigger *trig, + bool state) +{ + struct bmp280_data *data = iio_trigger_get_drvdata(trig); + int ret; + + guard(mutex)(&data->lock); + + ret = regmap_update_bits(data->regmap, BMP580_REG_INT_CONFIG, + BMP580_INT_CONFIG_INT_EN, + FIELD_PREP(BMP580_INT_CONFIG_INT_EN, !!state)); + if (ret) + dev_err(data->dev, + "Could not %s interrupt.\n", str_enable_disable(state)); + return ret; +} + +static const struct iio_trigger_ops bmp580_trigger_ops = { + .set_trigger_state = &bmp580_data_rdy_trigger_set_state, + .reenable = &bmp580_trigger_reenable, +}; + +static int bmp580_int_pin_config(struct bmp280_data *data) +{ + int pin_drive_cfg = FIELD_PREP(BMP580_INT_CONFIG_OPEN_DRAIN, + data->trig_open_drain); + int pin_level_cfg = FIELD_PREP(BMP580_INT_CONFIG_LEVEL, + data->trig_active_high); + int ret, int_pin_cfg = pin_drive_cfg | pin_level_cfg; + + ret = regmap_update_bits(data->regmap, BMP580_REG_INT_CONFIG, + BMP580_INT_CONFIG_MASK, int_pin_cfg); + if (ret) { + dev_err(data->dev, "Could not set interrupt settings.\n"); + return ret; + } + + ret = regmap_set_bits(data->regmap, BMP580_REG_INT_SOURCE, + BMP580_INT_SOURCE_DRDY); + if (ret) + dev_err(data->dev, "Could not set interrupt source.\n"); + + return ret; +} + +static irqreturn_t bmp580_irq_thread_handler(int irq, void *p) +{ + struct iio_dev *indio_dev = p; + struct bmp280_data *data = iio_priv(indio_dev); + unsigned int int_ctrl; + int ret; + + scoped_guard(mutex, &data->lock) { + ret = regmap_read(data->regmap, BMP580_REG_INT_STATUS, &int_ctrl); + if (ret) + return IRQ_NONE; + } + + if (FIELD_GET(BMP580_INT_STATUS_DRDY_MASK, int_ctrl)) + iio_trigger_poll_nested(data->trig); + + return IRQ_HANDLED; +} + +static int bmp580_trigger_probe(struct iio_dev *indio_dev) +{ + return __bmp280_trigger_probe(indio_dev, &bmp580_trigger_ops, + bmp580_int_pin_config, + bmp580_irq_thread_handler); +} + static irqreturn_t bmp580_trigger_handler(int irq, void *p) { struct iio_poll_func *pf = p; @@ -2496,6 +2713,7 @@ const struct bmp280_chip_info bmp580_chip_info = { .wait_conv = bmp580_wait_conv, .preinit = bmp580_preinit, + .trigger_probe = bmp580_trigger_probe, .trigger_handler = bmp580_trigger_handler, }; EXPORT_SYMBOL_NS(bmp580_chip_info, IIO_BMP280); @@ -3043,8 +3261,11 @@ int bmp280_common_probe(struct device *dev, * however as it happens, the BMP085 shares the chip ID of BMP180 * so we look for an IRQ if we have that. */ - if (irq > 0 && (chip_id == BMP180_CHIP_ID)) { - ret = bmp085_fetch_eoc_irq(dev, name, irq, data); + if (irq > 0) { + if (chip_id == BMP180_CHIP_ID) + ret = bmp085_fetch_eoc_irq(dev, name, irq, data); + if (data->chip_info->trigger_probe) + ret = data->chip_info->trigger_probe(indio_dev); if (ret) return ret; } diff --git a/drivers/iio/pressure/bmp280.h b/drivers/iio/pressure/bmp280.h index c9840b8d58b0..0c32b6430677 100644 --- a/drivers/iio/pressure/bmp280.h +++ b/drivers/iio/pressure/bmp280.h @@ -55,8 +55,17 @@ #define BMP580_CMD_NVM_WRITE_SEQ_1 0xA0 #define BMP580_CMD_SOFT_RESET 0xB6 +#define BMP580_INT_STATUS_DRDY_MASK BIT(0) #define BMP580_INT_STATUS_POR_MASK BIT(4) +#define BMP580_INT_SOURCE_DRDY BIT(0) + +#define BMP580_INT_CONFIG_MASK GENMASK(3, 0) +#define BMP580_INT_CONFIG_LATCH BIT(0) +#define BMP580_INT_CONFIG_LEVEL BIT(1) +#define BMP580_INT_CONFIG_OPEN_DRAIN BIT(2) +#define BMP580_INT_CONFIG_INT_EN BIT(3) + #define BMP580_STATUS_CORE_RDY_MASK BIT(0) #define BMP580_STATUS_NVM_RDY_MASK BIT(1) #define BMP580_STATUS_NVM_ERR_MASK BIT(2) @@ -175,6 +184,14 @@ #define BMP380_TEMP_MEAS_OFFSET 163 #define BMP380_PRESS_MEAS_OFFSET 392 +#define BMP380_INT_STATUS_DRDY BIT(3) + +#define BMP380_INT_CTRL_SETTINGS_MASK GENMASK(2, 0) +#define BMP380_INT_CTRL_OPEN_DRAIN BIT(0) +#define BMP380_INT_CTRL_LEVEL BIT(1) +#define BMP380_INT_CTRL_LATCH BIT(2) +#define BMP380_INT_CTRL_DRDY_EN BIT(6) + #define BMP380_MIN_TEMP -4000 #define BMP380_MAX_TEMP 8500 #define BMP380_MIN_PRES 3000000 @@ -406,6 +423,9 @@ struct bmp280_data { struct regmap *regmap; struct completion done; bool use_eoc; + bool trig_open_drain; + bool trig_active_high; + struct iio_trigger *trig; const struct bmp280_chip_info *chip_info; union { struct bmp180_calib bmp180; @@ -510,6 +530,7 @@ struct bmp280_chip_info { int (*set_mode)(struct bmp280_data *data, enum bmp280_op_mode mode); int (*wait_conv)(struct bmp280_data *data); + int (*trigger_probe)(struct iio_dev *indio_dev); irqreturn_t (*trigger_handler)(int irq, void *p); };