diff mbox series

docs: iio: fix grammatical error

Message ID 20241002100341.110435-1-ivinjabraham@gmail.com (mailing list archive)
State Accepted
Headers show
Series docs: iio: fix grammatical error | expand

Commit Message

Ivin Joel Abraham Oct. 2, 2024, 10:03 a.m. UTC
Clarify the instruction for disabling autocalibration by adding the word
"by"

Signed-off-by: Ivin Joel Abraham <ivinjabraham@gmail.com>
---
 Documentation/iio/bno055.rst | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Comments

Jonathan Cameron Oct. 6, 2024, 11:44 a.m. UTC | #1
On Wed,  2 Oct 2024 15:33:41 +0530
Ivin Joel Abraham <ivinjabraham@gmail.com> wrote:

> Clarify the instruction for disabling autocalibration by adding the word
> "by"
> 
> Signed-off-by: Ivin Joel Abraham <ivinjabraham@gmail.com>
Applied.

Thanks,
> ---
>  Documentation/iio/bno055.rst | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/Documentation/iio/bno055.rst b/Documentation/iio/bno055.rst
> index 9a489a79d8f5..f1111ff3fe2e 100644
> --- a/Documentation/iio/bno055.rst
> +++ b/Documentation/iio/bno055.rst
> @@ -22,7 +22,7 @@ This driver supports also IIO buffers.
>  
>  The IMU continuously performs an autocalibration procedure if (and only if)
>  operating in fusion mode. The magnetometer autocalibration can however be
> -disabled writing 0 in the sysfs in_magn_calibration_fast_enable attribute.
> +disabled by writing 0 in the sysfs in_magn_calibration_fast_enable attribute.
>  
>  The driver provides access to autocalibration flags (i.e. you can known if
>  the IMU has successfully autocalibrated) and to the calibration data blob.
diff mbox series

Patch

diff --git a/Documentation/iio/bno055.rst b/Documentation/iio/bno055.rst
index 9a489a79d8f5..f1111ff3fe2e 100644
--- a/Documentation/iio/bno055.rst
+++ b/Documentation/iio/bno055.rst
@@ -22,7 +22,7 @@  This driver supports also IIO buffers.
 
 The IMU continuously performs an autocalibration procedure if (and only if)
 operating in fusion mode. The magnetometer autocalibration can however be
-disabled writing 0 in the sysfs in_magn_calibration_fast_enable attribute.
+disabled by writing 0 in the sysfs in_magn_calibration_fast_enable attribute.
 
 The driver provides access to autocalibration flags (i.e. you can known if
 the IMU has successfully autocalibrated) and to the calibration data blob.