@@ -2,6 +2,7 @@
#ifndef BME680_H_
#define BME680_H_
+#include <linux/pm.h>
#include <linux/regmap.h>
#define BME680_REG_CHIP_ID 0xD0
@@ -82,6 +83,7 @@
#define BME680_CALIB_RANGE_3_LEN 5
extern const struct regmap_config bme680_regmap_config;
+extern const struct dev_pm_ops bme680_dev_pm_ops;
int bme680_core_probe(struct device *dev, struct regmap *regmap,
const char *name);
@@ -14,6 +14,8 @@
#include <linux/device.h>
#include <linux/log2.h>
#include <linux/module.h>
+#include <linux/pm.h>
+#include <linux/pm_runtime.h>
#include <linux/regmap.h>
#include <linux/regulator/consumer.h>
@@ -823,9 +825,9 @@ static int bme680_read_gas(struct bme680_data *data, int *comp_gas_res)
return 0;
}
-static int bme680_read_raw(struct iio_dev *indio_dev,
- struct iio_chan_spec const *chan,
- int *val, int *val2, long mask)
+static int __bme680_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int *val, int *val2, long mask)
{
struct bme680_data *data = iio_priv(indio_dev);
int chan_val, ret;
@@ -937,14 +939,30 @@ static int bme680_read_raw(struct iio_dev *indio_dev,
}
}
+static int bme680_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int *val, int *val2, long mask)
+{
+ struct bme680_data *data = iio_priv(indio_dev);
+ struct device *dev = regmap_get_device(data->regmap);
+ int ret;
+
+ pm_runtime_get_sync(dev);
+ ret = __bme680_read_raw(indio_dev, chan, val, val2, mask);
+ pm_runtime_mark_last_busy(dev);
+ pm_runtime_put_autosuspend(dev);
+
+ return ret;
+}
+
static bool bme680_is_valid_oversampling(int rate)
{
return (rate > 0 && rate <= 16 && is_power_of_2(rate));
}
-static int bme680_write_raw(struct iio_dev *indio_dev,
- struct iio_chan_spec const *chan,
- int val, int val2, long mask)
+static int __bme680_write_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int val, int val2, long mask)
{
struct bme680_data *data = iio_priv(indio_dev);
@@ -989,6 +1007,22 @@ static int bme680_write_raw(struct iio_dev *indio_dev,
}
}
+static int bme680_write_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int val, int val2, long mask)
+{
+ struct bme680_data *data = iio_priv(indio_dev);
+ struct device *dev = regmap_get_device(data->regmap);
+ int ret;
+
+ pm_runtime_get_sync(dev);
+ ret = __bme680_write_raw(indio_dev, chan, val, val2, mask);
+ pm_runtime_mark_last_busy(dev);
+ pm_runtime_put_autosuspend(dev);
+
+ return ret;
+}
+
static const char bme680_oversampling_ratio_show[] = "1 2 4 8 16";
static IIO_CONST_ATTR(oversampling_ratio_available,
@@ -1091,6 +1125,39 @@ static irqreturn_t bme680_trigger_handler(int irq, void *p)
return IRQ_HANDLED;
}
+static int bme680_buffer_preenable(struct iio_dev *indio_dev)
+{
+ struct bme680_data *data = iio_priv(indio_dev);
+ struct device *dev = regmap_get_device(data->regmap);
+
+ pm_runtime_get_sync(dev);
+ return 0;
+}
+
+static int bme680_buffer_postdisable(struct iio_dev *indio_dev)
+{
+ struct bme680_data *data = iio_priv(indio_dev);
+ struct device *dev = regmap_get_device(data->regmap);
+
+ pm_runtime_mark_last_busy(dev);
+ pm_runtime_put_autosuspend(dev);
+ return 0;
+}
+
+static const struct iio_buffer_setup_ops bme680_buffer_setup_ops = {
+ .preenable = bme680_buffer_preenable,
+ .postdisable = bme680_buffer_postdisable,
+};
+
+static void bme680_pm_disable(void *data)
+{
+ struct device *dev = data;
+
+ pm_runtime_get_sync(dev);
+ pm_runtime_put_noidle(dev);
+ pm_runtime_disable(dev);
+}
+
int bme680_core_probe(struct device *dev, struct regmap *regmap,
const char *name)
{
@@ -1164,15 +1231,60 @@ int bme680_core_probe(struct device *dev, struct regmap *regmap,
ret = devm_iio_triggered_buffer_setup(dev, indio_dev,
iio_pollfunc_store_time,
bme680_trigger_handler,
- NULL);
+ &bme680_buffer_setup_ops);
if (ret)
return dev_err_probe(dev, ret,
"iio triggered buffer setup failed\n");
+ /* Enable runtime PM */
+ pm_runtime_get_noresume(dev);
+ pm_runtime_set_autosuspend_delay(dev, BME680_STARTUP_TIME_US * 100);
+ pm_runtime_use_autosuspend(dev);
+ pm_runtime_set_active(dev);
+ ret = devm_pm_runtime_enable(dev);
+ if (ret)
+ return ret;
+
+ pm_runtime_put(dev);
+
+ ret = devm_add_action_or_reset(dev, bme680_pm_disable, dev);
+ if (ret)
+ return ret;
+
return devm_iio_device_register(dev, indio_dev);
}
EXPORT_SYMBOL_NS_GPL(bme680_core_probe, IIO_BME680);
+static int bme680_runtime_suspend(struct device *dev)
+{
+ struct iio_dev *indio_dev = dev_get_drvdata(dev);
+ struct bme680_data *data = iio_priv(indio_dev);
+
+ return regulator_bulk_disable(BME680_NUM_SUPPLIES, data->supplies);
+}
+
+static int bme680_runtime_resume(struct device *dev)
+{
+ struct iio_dev *indio_dev = dev_get_drvdata(dev);
+ struct bme680_data *data = iio_priv(indio_dev);
+ int ret;
+
+ ret = regulator_bulk_enable(BME680_NUM_SUPPLIES, data->supplies);
+ if (ret)
+ return ret;
+
+ fsleep(BME680_STARTUP_TIME_US);
+
+ ret = bme680_chip_config(data);
+ if (ret)
+ return ret;
+
+ return bme680_gas_config(data);
+}
+
+EXPORT_RUNTIME_DEV_PM_OPS(bme680_dev_pm_ops, bme680_runtime_suspend,
+ bme680_runtime_resume, NULL);
+
MODULE_AUTHOR("Himanshu Jha <himanshujha199640@gmail.com>");
MODULE_DESCRIPTION("Bosch BME680 Driver");
MODULE_LICENSE("GPL v2");
Add runtime power management to the device. To facilitate this, add also a struct dev* inside the bme680_data structure to have the device accesible from the data structure. Signed-off-by: Vasileios Amoiridis <vassilisamir@gmail.com> --- drivers/iio/chemical/bme680.h | 2 + drivers/iio/chemical/bme680_core.c | 126 +++++++++++++++++++++++++++-- 2 files changed, 121 insertions(+), 7 deletions(-)