@@ -25,6 +25,8 @@ description: |
* https://www.analog.com/en/products/ad7386-4.html
* https://www.analog.com/en/products/ad7387-4.html
* https://www.analog.com/en/products/ad7388-4.html
+ * https://www.analog.com/en/products/adaq4370-4.html
+ * https://www.analog.com/en/products/adaq4380-4.html
$ref: /schemas/spi/spi-peripheral-props.yaml#
@@ -46,6 +48,8 @@ properties:
- adi,ad7386-4
- adi,ad7387-4
- adi,ad7388-4
+ - adi,adaq4370-4
+ - adi,adaq4380-4
reg:
maxItems: 1
@@ -70,6 +74,20 @@ properties:
refin-supply:
description:
A 2.5V to 3.3V supply for external reference voltage, for ad7380-4 only.
+ For adaq devices, a 5V supply voltage. A 3.3V internal reference is
+ derived from it. Connect to vs-p-supply for normal operation.
+
+ vs-p-supply:
+ description:
+ Amplifiers positive supply.
+
+ vs-n-supply:
+ description:
+ Amplifiers negative supply.
+
+ ldo-supply:
+ description:
+ LDO supply. Connect to vs-p-supply or a 3.6 to 5.5 V supply.
aina-supply:
description:
@@ -97,12 +115,45 @@ properties:
specify the ALERT interrupt.
maxItems: 1
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
required:
- compatible
- reg
- vcc-supply
- vlogic-supply
+patternProperties:
+ "^channel@[0-3]$":
+ $ref: adc.yaml
+ type: object
+
+ properties:
+ reg:
+ description:
+ The channel number. From 0 to 3 corresponding to channels A,B,C,D
+ minimum: 0
+ maximum: 3
+
+ adi,gain-milli:
+ description:
+ The hardware gain applied to the ADC input (in milli units).
+ If not present, default to 1000 (no actual gain applied).
+ Refer to the typical connection diagrams section of the datasheet for
+ pin wiring.
+ $ref: /schemas/types.yaml#/definitions/uint16
+ enum: [300, 600, 1000, 1600]
+ default: 1000
+
+ required:
+ - reg
+
+ additionalProperties: false
+
unevaluatedProperties: false
allOf:
@@ -140,6 +191,7 @@ allOf:
aind-supply: false
# ad7380-4 uses refin-supply as external reference.
+ # adaq devices use internal reference only, derived from refin-supply
# All other chips from ad738x family use refio as optional external reference.
# When refio-supply is omitted, internal reference is used.
- if:
@@ -147,6 +199,8 @@ allOf:
compatible:
enum:
- adi,ad7380-4
+ - adi,adaq4370-4
+ - adi,adaq4380-4
then:
properties:
refio-supply: false
@@ -156,6 +210,27 @@ allOf:
properties:
refin-supply: false
+ # adaq devices need more supplies and using channel to declare gain property
+ # only applies to adaq devices
+ - if:
+ properties:
+ compatible:
+ enum:
+ - adi,adaq4370-4
+ - adi,adaq4380-4
+ then:
+ required:
+ - vs-p-supply
+ - vs-n-supply
+ - ldo-supply
+ else:
+ properties:
+ vs-p-supply: false
+ vs-n-supply: false
+ ldo-supply: false
+ patternProperties:
+ "^channel@[0-3]$": false
+
examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
@@ -180,3 +255,48 @@ examples:
refio-supply = <&supply_2_5V>;
};
};
+
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ adc@0 {
+ compatible = "adi,adaq4380-4";
+ reg = <0>;
+
+ spi-cpol;
+ spi-cpha;
+ spi-max-frequency = <80000000>;
+
+ interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-parent = <&gpio0>;
+
+ vcc-supply = <&supply_3_3V>;
+ vlogic-supply = <&supply_3_3V>;
+ refin-supply = <&supply_5V>;
+ vs-p-supply = <&supply_5V>;
+ vs-n-supply = <&supply_0V>;
+ ldo-supply = <&supply_5V>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@0 {
+ reg = <0>;
+ adi,gain-milli = /bits/ 16 <300>;
+ };
+
+ channel@2 {
+ reg = <2>;
+ adi,gain-milli = /bits/ 16 <600>;
+ };
+
+ channel@3 {
+ reg = <3>;
+ adi,gain-milli = /bits/ 16 <1000>;
+ };
+ };
+ };