@@ -13,6 +13,8 @@
* ad7381-4 : https://www.analog.com/media/en/technical-documentation/data-sheets/ad7381-4.pdf
* ad7383/4-4 : https://www.analog.com/media/en/technical-documentation/data-sheets/ad7383-4-ad7384-4.pdf
* ad7386/7/8-4 : https://www.analog.com/media/en/technical-documentation/data-sheets/ad7386-4-7387-4-7388-4.pdf
+ * adaq4370-4 : https://www.analog.com/media/en/technical-documentation/data-sheets/adaq4370-4.pdf
+ * adaq4380-4 : https://www.analog.com/media/en/technical-documentation/data-sheets/adaq4380-4.pdf
*/
#include <linux/align.h>
@@ -22,11 +24,14 @@
#include <linux/device.h>
#include <linux/err.h>
#include <linux/kernel.h>
+#include <linux/math.h>
#include <linux/module.h>
#include <linux/regmap.h>
#include <linux/regulator/consumer.h>
#include <linux/slab.h>
#include <linux/spi/spi.h>
+#include <linux/units.h>
+#include <linux/util_macros.h>
#include <linux/iio/buffer.h>
#include <linux/iio/iio.h>
@@ -36,6 +41,8 @@
#define MAX_NUM_CHANNELS 8
/* 2.5V internal reference voltage */
#define AD7380_INTERNAL_REF_MV 2500
+/* 3.3V internal reference voltage for ADAQ */
+#define ADAQ4380_INTERNAL_REF_MV 3300
/* reading and writing registers is more reliable at lower than max speed */
#define AD7380_REG_WR_SPEED_HZ 10000000
@@ -82,6 +89,7 @@
* supports only 1 SDO line (standard SPI transaction)
*/
#define AD7380_NUM_SDO_LINES 1
+#define AD7380_DEFAULT_GAIN_MILLI 1000
struct ad7380_timing_specs {
const unsigned int t_csh_ns; /* CS minimum high time */
@@ -92,10 +100,12 @@ struct ad7380_chip_info {
const struct iio_chan_spec *channels;
unsigned int num_channels;
unsigned int num_simult_channels;
+ bool has_hardware_gain;
bool has_mux;
const char * const *supplies;
unsigned int num_supplies;
bool external_ref_only;
+ bool adaq_internal_ref_only;
const char * const *vcm_supplies;
unsigned int num_vcm_supplies;
const unsigned long *available_scan_masks;
@@ -187,11 +197,12 @@ static const struct iio_scan_type ad7380_scan_type_16_u[] = {
},
};
-#define AD7380_CHANNEL(index, bits, diff, sign) { \
+#define _AD7380_CHANNEL(index, bits, diff, sign, gain) { \
.type = IIO_VOLTAGE, \
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
+ ((gain) ? BIT(IIO_CHAN_INFO_SCALE) : 0) | \
((diff) ? 0 : BIT(IIO_CHAN_INFO_OFFSET)), \
- .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | \
+ .info_mask_shared_by_type = ((gain) ? 0 : BIT(IIO_CHAN_INFO_SCALE)) | \
BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), \
.info_mask_shared_by_type_available = \
BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), \
@@ -205,6 +216,12 @@ static const struct iio_scan_type ad7380_scan_type_16_u[] = {
.num_ext_scan_type = ARRAY_SIZE(ad7380_scan_type_##bits##_##sign), \
}
+#define AD7380_CHANNEL(index, bits, diff, sign) \
+ _AD7380_CHANNEL(index, bits, diff, sign, false)
+
+#define ADAQ4380_CHANNEL(index, bits, diff, sign) \
+ _AD7380_CHANNEL(index, bits, diff, sign, true)
+
#define DEFINE_AD7380_2_CHANNEL(name, bits, diff, sign) \
static const struct iio_chan_spec name[] = { \
AD7380_CHANNEL(0, bits, diff, sign), \
@@ -221,6 +238,15 @@ static const struct iio_chan_spec name[] = { \
IIO_CHAN_SOFT_TIMESTAMP(4), \
}
+#define DEFINE_ADAQ4380_4_CHANNEL(name, bits, diff, sign) \
+static const struct iio_chan_spec name[] = { \
+ ADAQ4380_CHANNEL(0, bits, diff, sign), \
+ ADAQ4380_CHANNEL(1, bits, diff, sign), \
+ ADAQ4380_CHANNEL(2, bits, diff, sign), \
+ ADAQ4380_CHANNEL(3, bits, diff, sign), \
+ IIO_CHAN_SOFT_TIMESTAMP(4), \
+}
+
#define DEFINE_AD7380_8_CHANNEL(name, bits, diff, sign) \
static const struct iio_chan_spec name[] = { \
AD7380_CHANNEL(0, bits, diff, sign), \
@@ -239,6 +265,7 @@ DEFINE_AD7380_2_CHANNEL(ad7380_channels, 16, 1, s);
DEFINE_AD7380_2_CHANNEL(ad7381_channels, 14, 1, s);
DEFINE_AD7380_4_CHANNEL(ad7380_4_channels, 16, 1, s);
DEFINE_AD7380_4_CHANNEL(ad7381_4_channels, 14, 1, s);
+DEFINE_ADAQ4380_4_CHANNEL(adaq4380_4_channels, 16, 1, s);
/* pseudo differential */
DEFINE_AD7380_2_CHANNEL(ad7383_channels, 16, 0, s);
DEFINE_AD7380_2_CHANNEL(ad7384_channels, 14, 0, s);
@@ -257,6 +284,10 @@ static const char * const ad7380_supplies[] = {
"vcc", "vlogic",
};
+static const char * const adaq4380_supplies[] = {
+ "ldo", "vcc", "vlogic", "vs-p", "vs-n", "refin",
+};
+
static const char * const ad7380_2_channel_vcm_supplies[] = {
"aina", "ainb",
};
@@ -347,6 +378,11 @@ static const int ad7380_oversampling_ratios[] = {
1, 2, 4, 8, 16, 32,
};
+/* Gains stored as fractions of 1000 so they can be expressed by integers. */
+static const int ad7380_gains[] = {
+ 300, 600, 1000, 1600,
+};
+
static const struct ad7380_chip_info ad7380_chip_info = {
.name = "ad7380",
.channels = ad7380_channels,
@@ -516,6 +552,32 @@ static const struct ad7380_chip_info ad7388_4_chip_info = {
.timing_specs = &ad7380_4_timing,
};
+static const struct ad7380_chip_info adaq4370_4_chip_info = {
+ .name = "adaq4370-4",
+ .channels = adaq4380_4_channels,
+ .num_channels = ARRAY_SIZE(adaq4380_4_channels),
+ .num_simult_channels = 4,
+ .supplies = adaq4380_supplies,
+ .num_supplies = ARRAY_SIZE(adaq4380_supplies),
+ .adaq_internal_ref_only = true,
+ .has_hardware_gain = true,
+ .available_scan_masks = ad7380_4_channel_scan_masks,
+ .timing_specs = &ad7380_4_timing,
+};
+
+static const struct ad7380_chip_info adaq4380_4_chip_info = {
+ .name = "adaq4380-4",
+ .channels = adaq4380_4_channels,
+ .num_channels = ARRAY_SIZE(adaq4380_4_channels),
+ .num_simult_channels = 4,
+ .supplies = adaq4380_supplies,
+ .num_supplies = ARRAY_SIZE(adaq4380_supplies),
+ .adaq_internal_ref_only = true,
+ .has_hardware_gain = true,
+ .available_scan_masks = ad7380_4_channel_scan_masks,
+ .timing_specs = &ad7380_4_timing,
+};
+
struct ad7380_state {
const struct ad7380_chip_info *chip_info;
struct spi_device *spi;
@@ -526,6 +588,7 @@ struct ad7380_state {
bool seq;
unsigned int vref_mv;
unsigned int vcm_mv[MAX_NUM_CHANNELS];
+ unsigned int gain_milli[MAX_NUM_CHANNELS];
/* xfers, message an buffer for reading sample data */
struct spi_transfer normal_xfer[2];
struct spi_message normal_msg;
@@ -876,8 +939,15 @@ static int ad7380_read_raw(struct iio_dev *indio_dev,
* * (2 × VREF) / 2^N, for differential chips
* * VREF / 2^N, for pseudo-differential chips
* where N is the ADC resolution (i.e realbits)
+ *
+ * The gain is stored as a fraction of 1000 and, as we need to
+ * divide vref_mv by the gain, we invert the gain/1000 fraction.
*/
- *val = st->vref_mv;
+ if (st->chip_info->has_hardware_gain)
+ *val = mult_frac(st->vref_mv, MILLI,
+ st->gain_milli[chan->scan_index]);
+ else
+ *val = st->vref_mv;
*val2 = scan_type->realbits - chan->differential;
return IIO_VAL_FRACTIONAL_LOG2;
@@ -1059,7 +1129,19 @@ static int ad7380_probe(struct spi_device *spi)
"Failed to enable power supplies\n");
fsleep(T_POWERUP_US);
- if (st->chip_info->external_ref_only) {
+ if (st->chip_info->adaq_internal_ref_only) {
+ /*
+ * ADAQ chips use fixed internal reference but still
+ * require a specific reference supply to power it.
+ * "refin" is already enabled with other power supplies
+ * in bulk_get_enable().
+ */
+
+ st->vref_mv = ADAQ4380_INTERNAL_REF_MV;
+
+ /* these chips don't have a register bit for this */
+ external_ref_en = false;
+ } else if (st->chip_info->external_ref_only) {
ret = devm_regulator_get_enable_read_voltage(dev, "refin");
if (ret < 0)
return dev_err_probe(dev, ret,
@@ -1103,6 +1185,42 @@ static int ad7380_probe(struct spi_device *spi)
st->vcm_mv[i] = ret / 1000;
}
+ for (i = 0; i < MAX_NUM_CHANNELS; i++)
+ st->gain_milli[i] = AD7380_DEFAULT_GAIN_MILLI;
+
+ if (st->chip_info->has_hardware_gain) {
+ device_for_each_child_node_scoped(dev, node) {
+ unsigned int channel, gain;
+ int gain_idx;
+
+ ret = fwnode_property_read_u32(node, "reg", &channel);
+ if (ret)
+ return dev_err_probe(dev, ret,
+ "Failed to read reg property\n");
+
+ if (channel >= st->chip_info->num_channels - 1)
+ return dev_err_probe(dev, -EINVAL,
+ "Invalid channel number %i\n",
+ channel);
+
+ ret = fwnode_property_read_u32(node, "adi,gain-milli",
+ &gain);
+ if (ret && ret != -EINVAL)
+ return dev_err_probe(dev, ret,
+ "Failed to read gain for channel %i\n",
+ channel);
+ if (ret != -EINVAL) {
+ /*
+ * Match gain value from dt to one of supported
+ * gains
+ */
+ gain_idx = find_closest(gain, ad7380_gains,
+ ARRAY_SIZE(ad7380_gains));
+ st->gain_milli[channel] = ad7380_gains[gain_idx];
+ }
+ }
+ }
+
st->regmap = devm_regmap_init(dev, NULL, st, &ad7380_regmap_config);
if (IS_ERR(st->regmap))
return dev_err_probe(dev, PTR_ERR(st->regmap),
@@ -1185,6 +1303,8 @@ static const struct of_device_id ad7380_of_match_table[] = {
{ .compatible = "adi,ad7386-4", .data = &ad7386_4_chip_info },
{ .compatible = "adi,ad7387-4", .data = &ad7387_4_chip_info },
{ .compatible = "adi,ad7388-4", .data = &ad7388_4_chip_info },
+ { .compatible = "adi,adaq4370-4", .data = &adaq4370_4_chip_info },
+ { .compatible = "adi,adaq4380-4", .data = &adaq4380_4_chip_info },
{ }
};
@@ -1203,6 +1323,8 @@ static const struct spi_device_id ad7380_id_table[] = {
{ "ad7386-4", (kernel_ulong_t)&ad7386_4_chip_info },
{ "ad7387-4", (kernel_ulong_t)&ad7387_4_chip_info },
{ "ad7388-4", (kernel_ulong_t)&ad7388_4_chip_info },
+ { "adaq4370-4", (kernel_ulong_t)&adaq4370_4_chip_info },
+ { "adaq4380-4", (kernel_ulong_t)&adaq4380_4_chip_info },
{ }
};
MODULE_DEVICE_TABLE(spi, ad7380_id_table);
adaq4370-4 (2MSPS) and adaq4380-4 (4MSPS) are quad-channel precision data acquisition signal chain μModule solutions compatible with the ad738x family, with the following differences: - pin selectable gain in front of each 4 adc - internal reference is 3V derived from refin-supply (5V) - additional supplies This implies that IIO_CHAN_INFO_SCALE can not be shared by type for these new devices. Signed-off-by: Julien Stephan <jstephan@baylibre.com> --- drivers/iio/adc/ad7380.c | 130 +++++++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 126 insertions(+), 4 deletions(-)