@@ -1633,6 +1633,10 @@ What: /sys/.../iio:deviceX/in_intensityY_uv_raw
What: /sys/.../iio:deviceX/in_intensityY_uva_raw
What: /sys/.../iio:deviceX/in_intensityY_uvb_raw
What: /sys/.../iio:deviceX/in_intensityY_duv_raw
+What: /sys/.../iio:deviceX/in_intensity_red_raw
+What: /sys/.../iio:deviceX/in_intensity_green_raw
+What: /sys/.../iio:deviceX/in_intensity_blue_raw
+What: /sys/.../iio:deviceX/in_intensity_clear_raw
KernelVersion: 3.4
Contact: linux-iio@vger.kernel.org
Description:
@@ -29,3 +29,4 @@ Industrial I/O Kernel Drivers
adxl380
bno055
ep93xx_adc
+ opt4060
new file mode 100644
@@ -0,0 +1,52 @@
+==============================
+OPT4060 driver
+==============================
+
+1. Overview
+=============================
+
+This driver supports the Texas Instrument RGBW high resolution color sensor over
+I2C.
+https://www.ti.com/lit/gpn/opt4060
+
+The driver supports:
+- Raw values for red, green, blue and clear.
+- Illuminance values.
+- Scaled color values for red, green and blue.
+- IIO events for thresholds.
+- IIO triggered buffer using both its own data ready trigger and triggers from
+other drivers.
+
+2. Illuminance calculation
+=============================
+
+Illuminance is calculated using the wide spectrum green channel.
+
+lux = GREEN_RAW x 2.15e-3
+
+The value is accessed from:
+/sys/bus/iio/devices/iio:deviceX/in_illuminance_input
+
+See section 8.4.5.2 in the data sheet for additional details.
+
+3. Scaled color values
+=============================
+
+The driver exposes scaled color values that indicate the ratio between the three
+different colors independent of the light intensity. This is calculated in the
+following way:
+
+R = RED_RAW x 2.4
+G = GREEN_RAW x 1.0
+B = BLUE_RAW x 1.3
+
+R_SCALED = R / (R + G + B)
+G_SCALED = G / (R + G + B)
+B_SCALED = B / (R + G + B)
+
+The values are accessed from:
+/sys/bus/iio/devices/iio:deviceX/in_intensity_red_scale
+/sys/bus/iio/devices/iio:deviceX/in_intensity_green_scale
+/sys/bus/iio/devices/iio:deviceX/in_intensity_blue_scale
+
+See section 8.4.5.2 in the data sheet for additional details.
\ No newline at end of file
@@ -491,6 +491,19 @@ config OPT4001
If built as a dynamically linked module, it will be called
opt4001.
+config OPT4060
+ tristate "Texas Instruments OPT4060 RGBW Color Sensor"
+ depends on I2C
+ select REGMAP_I2C
+ select IIO_BUFFER
+ select IIO_TRIGGERED_BUFFER
+ help
+ If you say Y or M here, you get support for Texas Instruments
+ OPT4060 RGBW Color Sensor.
+
+ If built as a dynamically linked module, it will be called
+ opt4060.
+
config PA12203001
tristate "TXC PA12203001 light and proximity sensor"
depends on I2C
@@ -42,6 +42,7 @@ obj-$(CONFIG_MAX44009) += max44009.o
obj-$(CONFIG_NOA1305) += noa1305.o
obj-$(CONFIG_OPT3001) += opt3001.o
obj-$(CONFIG_OPT4001) += opt4001.o
+obj-$(CONFIG_OPT4060) += opt4060.o
obj-$(CONFIG_PA12203001) += pa12203001.o
obj-$(CONFIG_ROHM_BU27008) += rohm-bu27008.o
obj-$(CONFIG_ROHM_BU27034) += rohm-bu27034.o
new file mode 100644
@@ -0,0 +1,1295 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2024 Axis Communications AB
+ *
+ * Datasheet: https://www.ti.com/lit/gpn/opt4060
+ *
+ * Device driver for the Texas Instruments OPT4060 RGBW Color Sensor.
+ */
+
+#include <linux/bitfield.h>
+#include <linux/i2c.h>
+#include <linux/iio/iio.h>
+#include <linux/math64.h>
+#include <linux/units.h>
+#include <linux/limits.h>
+#include <linux/module.h>
+#include <linux/property.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+#include <linux/iio/events.h>
+#include <linux/iio/trigger.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/triggered_buffer.h>
+
+/* OPT4060 register set */
+#define OPT4060_RED_MSB 0x00
+#define OPT4060_RED_LSB 0x01
+#define OPT4060_GREEN_MSB 0x02
+#define OPT4060_GREEN_LSB 0x03
+#define OPT4060_BLUE_MSB 0x04
+#define OPT4060_BLUE_LSB 0x05
+#define OPT4060_CLEAR_MSB 0x06
+#define OPT4060_CLEAR_LSB 0x07
+#define OPT4060_THRESHOLD_LOW 0x08
+#define OPT4060_THRESHOLD_HIGH 0x09
+#define OPT4060_CTRL 0x0a
+#define OPT4060_INT_CTRL 0x0b
+#define OPT4060_RES_CTRL 0x0c
+#define OPT4060_DEVICE_ID 0x11
+
+/* OPT4060 register mask */
+#define OPT4060_EXPONENT_MASK GENMASK(15, 12)
+#define OPT4060_MSB_MASK GENMASK(11, 0)
+#define OPT4060_LSB_MASK GENMASK(15, 8)
+#define OPT4060_COUNTER_MASK GENMASK(7, 4)
+#define OPT4060_CRC_MASK GENMASK(3, 0)
+
+/* OPT4060 device id mask */
+#define OPT4060_DEVICE_ID_MASK GENMASK(11, 0)
+
+/* OPT4060 control register masks */
+#define OPT4060_CTRL_QWAKE_MASK BIT(15)
+#define OPT4060_CTRL_RANGE_MASK GENMASK(13, 10)
+#define OPT4060_CTRL_CONV_TIME_MASK GENMASK(9, 6)
+#define OPT4060_CTRL_OPER_MODE_MASK GENMASK(5, 4)
+#define OPT4060_CTRL_LATCH_MASK BIT(3)
+#define OPT4060_CTRL_INT_POL_MASK BIT(2)
+#define OPT4060_CTRL_FAULT_COUNT_MASK GENMASK(1, 0)
+
+/* OPT4060 interrupt control register masks */
+#define OPT4060_INT_CTRL_THRESH_SEL GENMASK(6, 5)
+#define OPT4060_INT_CTRL_OUTPUT BIT(4)
+#define OPT4060_INT_CTRL_INT_CFG GENMASK(3, 2)
+#define OPT4060_INT_CTRL_THRESHOLD 0x0
+#define OPT4060_INT_CTRL_NEXT_CH 0x1
+#define OPT4060_INT_CTRL_ALL_CH 0x3
+
+/* OPT4060 result control register masks */
+#define OPT4060_RES_CTRL_OVERLOAD BIT(3)
+#define OPT4060_RES_CTRL_CONV_READY BIT(2)
+#define OPT4060_RES_CTRL_FLAG_H BIT(1)
+#define OPT4060_RES_CTRL_FLAG_L BIT(0)
+
+/* OPT4060 constants */
+#define OPT4060_DEVICE_ID_VAL 0x821
+
+/* OPT4060 operating modes */
+#define OPT4060_CTRL_OPER_MODE_OFF 0x0
+#define OPT4060_CTRL_OPER_MODE_FORCED 0x1
+#define OPT4060_CTRL_OPER_MODE_ONE_SHOT 0x2
+#define OPT4060_CTRL_OPER_MODE_CONTINUOUS 0x3
+
+/* OPT4060 conversion control register definitions */
+#define OPT4060_CTRL_CONVERSION_0_6MS 0x0
+#define OPT4060_CTRL_CONVERSION_1MS 0x1
+#define OPT4060_CTRL_CONVERSION_1_8MS 0x2
+#define OPT4060_CTRL_CONVERSION_3_4MS 0x3
+#define OPT4060_CTRL_CONVERSION_6_5MS 0x4
+#define OPT4060_CTRL_CONVERSION_12_7MS 0x5
+#define OPT4060_CTRL_CONVERSION_25MS 0x6
+#define OPT4060_CTRL_CONVERSION_50MS 0x7
+#define OPT4060_CTRL_CONVERSION_100MS 0x8
+#define OPT4060_CTRL_CONVERSION_200MS 0x9
+#define OPT4060_CTRL_CONVERSION_400MS 0xa
+#define OPT4060_CTRL_CONVERSION_800MS 0xb
+
+/* OPT4060 fault count control register definitions */
+#define OPT4060_CTRL_FAULT_COUNT_1 0x0
+#define OPT4060_CTRL_FAULT_COUNT_2 0x1
+#define OPT4060_CTRL_FAULT_COUNT_4 0x2
+#define OPT4060_CTRL_FAULT_COUNT_8 0x3
+
+/* OPT4060 scale light level range definitions */
+#define OPT4060_CTRL_LIGHT_SCALE_AUTO 12
+
+/* OPT4060 default values */
+#define OPT4060_DEFAULT_CONVERSION_TIME OPT4060_CTRL_CONVERSION_50MS
+
+/*
+ * enum opt4060_chan_type - OPT4060 channel types
+ * @OPT4060_RED: Red channel.
+ * @OPT4060_GREEN: Green channel.
+ * @OPT4060_BLUE: Blue channel.
+ * @OPT4060_CLEAR: Clear (white) channel.
+ * @OPT4060_ILLUM: Calculated illuminance channel.
+ * @OPT4060_NUM_CHANS: Number of channel types.
+ */
+enum opt4060_chan_type {
+ OPT4060_RED,
+ OPT4060_GREEN,
+ OPT4060_BLUE,
+ OPT4060_CLEAR,
+ OPT4060_ILLUM,
+ OPT4060_NUM_CHANS
+};
+
+struct opt4060_chip {
+ struct regmap *regmap;
+ struct device *dev;
+ struct iio_trigger *trig;
+ u8 int_time;
+ int irq;
+ struct completion completion;
+ bool thresh_event_lo_active;
+ bool thresh_event_hi_active;
+};
+
+struct opt4060_channel_factor {
+ u32 mul;
+ u32 div;
+};
+
+static const int opt4060_int_time_available[][2] = {
+ { 0, 600 },
+ { 0, 1000 },
+ { 0, 1800 },
+ { 0, 3400 },
+ { 0, 6500 },
+ { 0, 12700 },
+ { 0, 25000 },
+ { 0, 50000 },
+ { 0, 100000 },
+ { 0, 200000 },
+ { 0, 400000 },
+ { 0, 800000 },
+};
+
+/*
+ * Conversion time is integration time + time to set register
+ * this is used as integration time.
+ */
+static const int opt4060_int_time_reg[][2] = {
+ { 600, OPT4060_CTRL_CONVERSION_0_6MS },
+ { 1000, OPT4060_CTRL_CONVERSION_1MS },
+ { 1800, OPT4060_CTRL_CONVERSION_1_8MS },
+ { 3400, OPT4060_CTRL_CONVERSION_3_4MS },
+ { 6500, OPT4060_CTRL_CONVERSION_6_5MS },
+ { 12700, OPT4060_CTRL_CONVERSION_12_7MS },
+ { 25000, OPT4060_CTRL_CONVERSION_25MS },
+ { 50000, OPT4060_CTRL_CONVERSION_50MS },
+ { 100000, OPT4060_CTRL_CONVERSION_100MS },
+ { 200000, OPT4060_CTRL_CONVERSION_200MS },
+ { 400000, OPT4060_CTRL_CONVERSION_400MS },
+ { 800000, OPT4060_CTRL_CONVERSION_800MS },
+};
+
+static int opt4060_als_time_to_index(const u32 als_integration_time)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(opt4060_int_time_available); i++) {
+ if (als_integration_time == opt4060_int_time_available[i][1])
+ return i;
+ }
+
+ return -EINVAL;
+}
+
+static u8 opt4060_calculate_crc(u8 exp, u32 mantissa, u8 count)
+{
+ u8 crc;
+
+ /*
+ * Calculates a 4-bit CRC from a 20-bit mantissa, 4-bit exponent and a 4-bit counter.
+ * crc[0] = XOR(mantissa[19:0], exp[3:0], count[3:0])
+ * crc[1] = XOR(mantissa[1,3,5,7,9,11,13,15,17,19], exp[1,3], count[1,3])
+ * crc[2] = XOR(mantissa[3,7,11,15,19], exp[3], count[3])
+ * crc[3] = XOR(mantissa[3,11,19])
+ */
+ crc = (hweight32(mantissa) + hweight32(exp) + hweight32(count)) % 2;
+ crc |= ((hweight32(mantissa & 0xAAAAA) + hweight32(exp & 0xA)
+ + hweight32(count & 0xA)) % 2) << 1;
+ crc |= ((hweight32(mantissa & 0x88888) + hweight32(exp & 0x8)
+ + hweight32(count & 0x8)) % 2) << 2;
+ crc |= (hweight32(mantissa & 0x80808) % 2) << 3;
+
+ return crc;
+}
+
+static int opt4060_set_int_state(struct opt4060_chip *chip, u32 state)
+{
+ int ret;
+ unsigned int regval;
+
+ regval = FIELD_PREP(OPT4060_INT_CTRL_INT_CFG, state);
+ ret = regmap_update_bits(chip->regmap, OPT4060_INT_CTRL,
+ OPT4060_INT_CTRL_INT_CFG, regval);
+ if (ret)
+ dev_err(chip->dev, "Failed to set interrupt config\n");
+ return ret;
+}
+
+static int opt4060_trigger_one_shot(struct opt4060_chip *chip)
+{
+ int ret;
+ unsigned int ctrl_reg;
+
+ /* Enable interrupt for conversion ready of all channels */
+ ret = opt4060_set_int_state(chip, OPT4060_INT_CTRL_ALL_CH);
+ if (ret)
+ return ret;
+
+ ret = regmap_read(chip->regmap, OPT4060_CTRL, &ctrl_reg);
+ if (ret < 0) {
+ dev_err(chip->dev, "Failed to read ctrl register\n");
+ return ret;
+ }
+
+ /* If the device is already in continuous mode, one-shot is not needed. */
+ if (FIELD_GET(OPT4060_CTRL_OPER_MODE_MASK, ctrl_reg) ==
+ OPT4060_CTRL_OPER_MODE_CONTINUOUS)
+ return 0;
+
+ ctrl_reg &= ~OPT4060_CTRL_OPER_MODE_MASK;
+ ctrl_reg |= FIELD_PREP(OPT4060_CTRL_OPER_MODE_MASK,
+ OPT4060_CTRL_OPER_MODE_ONE_SHOT);
+
+ /* Trigger a new conversion by writing to CRTL register. */
+ ret = regmap_write(chip->regmap, OPT4060_CTRL, ctrl_reg);
+ if (ret)
+ dev_err(chip->dev, "Failed to set ctrl register\n");
+ return ret;
+}
+
+static int opt4060_set_continous_mode(struct opt4060_chip *chip,
+ bool continuous)
+{
+ u16 reg;
+ int ret;
+
+ if (continuous)
+ reg = FIELD_PREP(OPT4060_CTRL_OPER_MODE_MASK,
+ OPT4060_CTRL_OPER_MODE_CONTINUOUS);
+ else
+ reg = FIELD_PREP(OPT4060_CTRL_OPER_MODE_MASK,
+ OPT4060_CTRL_OPER_MODE_ONE_SHOT);
+
+ ret = regmap_update_bits(chip->regmap, OPT4060_CTRL,
+ OPT4060_CTRL_OPER_MODE_MASK, reg);
+ if (ret)
+ dev_err(chip->dev, "Failed to set configuration\n");
+
+ return ret;
+}
+
+static int opt4060_read_raw_value(struct opt4060_chip *chip,
+ unsigned long address, u32 *raw)
+{
+ int ret;
+ u16 result[2];
+ u32 mantissa_raw;
+ u16 msb, lsb;
+ u8 exp, count, crc, calc_crc;
+
+ ret = regmap_bulk_read(chip->regmap, address, result, 2);
+ if (ret) {
+ dev_err(chip->dev, "Reading channel data failed\n");
+ return ret;
+ }
+ exp = FIELD_GET(OPT4060_EXPONENT_MASK, result[0]);
+ msb = FIELD_GET(OPT4060_MSB_MASK, result[0]);
+ count = FIELD_GET(OPT4060_COUNTER_MASK, result[1]);
+ crc = FIELD_GET(OPT4060_CRC_MASK, result[1]);
+ lsb = FIELD_GET(OPT4060_LSB_MASK, result[1]);
+ mantissa_raw = (msb << 8) + lsb;
+ calc_crc = opt4060_calculate_crc(exp, mantissa_raw, count);
+ if (calc_crc != crc)
+ return -EIO;
+ *raw = mantissa_raw << exp;
+ return 0;
+}
+
+static int opt4060_trigger_new_samples(struct iio_dev *indio_dev)
+{
+ struct opt4060_chip *chip = iio_priv(indio_dev);
+ int ret;
+
+ /*
+ * The conversion time should be 500us startup time plus the integration time
+ * times the number of channels. An exact timeout isn't critical, it's better
+ * not to get incorrect errors in the log. Setting the timeout to double the
+ * theoretical time plus and extra 100ms margin.
+ */
+ unsigned int timeout_us = (500 + OPT4060_NUM_CHANS *
+ opt4060_int_time_reg[chip->int_time][0]) * 2 + 100000;
+
+ if (chip->irq) {
+ reinit_completion(&chip->completion);
+ ret = opt4060_trigger_one_shot(chip);
+ if (ret)
+ return ret;
+ if (wait_for_completion_timeout(&chip->completion,
+ usecs_to_jiffies(timeout_us)) == 0) {
+ dev_err(chip->dev, "Completion timed out.\n");
+ return -ETIME;
+ }
+ /*
+ * The opt4060_trigger_one_shot() function will enable irq on
+ * every conversion. If the buffer isn't enabled, irq should
+ * only be enabled for thresholds.
+ */
+ if (!iio_buffer_enabled(indio_dev)) {
+ ret = opt4060_set_int_state(chip, OPT4060_INT_CTRL_THRESHOLD);
+ if (ret)
+ return ret;
+ }
+ } else {
+ unsigned int ready;
+
+ ret = opt4060_trigger_one_shot(chip);
+ if (ret)
+ return ret;
+
+ ret = regmap_read_poll_timeout(chip->regmap, OPT4060_RES_CTRL,
+ ready, (ready & OPT4060_RES_CTRL_CONV_READY),
+ 1000, timeout_us);
+ if (ret)
+ dev_err(chip->dev, "Conversion ready did not finish within timeout.\n");
+ }
+ return ret;
+}
+
+static int opt4060_read_chan_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan, int *val)
+{
+ struct opt4060_chip *chip = iio_priv(indio_dev);
+ u32 adc_raw;
+ int ret;
+
+ ret = opt4060_trigger_new_samples(indio_dev);
+ if (ret) {
+ dev_err(chip->dev, "Failed to trigger new samples.\n");
+ return ret;
+ }
+
+ ret = opt4060_read_raw_value(chip, chan->address, &adc_raw);
+ if (ret) {
+ dev_err(chip->dev, "Reading raw channel data failed.\n");
+ return ret;
+ }
+ *val = adc_raw;
+ return IIO_VAL_INT;
+}
+
+/*
+ * Function for calculating color components independent of light intensity. The
+ * raw values are multiplied by individual factors that correspond to the
+ * sensitivity of the different color filters. The returned value is normalized.
+ */
+static int opt4060_read_chan_scale(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int *val, int *val2)
+{
+ struct opt4060_chip *chip = iio_priv(indio_dev);
+ static const u32 color_factors[] = { 24, 10, 13 };
+ u32 adc_raw[3], sum = 0, rem;
+ int ret;
+
+ ret = opt4060_trigger_new_samples(indio_dev);
+ if (ret) {
+ dev_err(chip->dev, "Failed to trigger new samples.\n");
+ return ret;
+ }
+
+ for (int color = OPT4060_RED; color <= OPT4060_BLUE; color++) {
+ ret = opt4060_read_raw_value(chip, indio_dev->channels[color].address,
+ &(adc_raw[color]));
+ if (ret) {
+ dev_err(chip->dev, "Reading raw channel data failed\n");
+ return ret;
+ }
+ adc_raw[color] *= color_factors[color];
+ sum += adc_raw[color];
+ }
+ *val = div_u64_rem((u64)adc_raw[chan->scan_index], sum, &rem);
+ *val2 = DIV_U64_ROUND_CLOSEST((u64)(rem * MICRO), sum);
+ return IIO_VAL_INT_PLUS_MICRO;
+}
+
+static int opt4060_calc_illuminance(struct opt4060_chip *chip, int *val)
+{
+ u32 lux_raw;
+ int ret;
+
+ /* The green wide spectral channel is used for illuminance. */
+ ret = opt4060_read_raw_value(chip, OPT4060_GREEN_MSB, &lux_raw);
+ if (ret) {
+ dev_err(chip->dev, "Reading raw channel data failed\n");
+ return ret;
+ }
+
+ /* Illuminance is calculated by ADC_RAW * 2.15e-3. */
+ *val = DIV_U64_ROUND_CLOSEST((u64)(lux_raw * 215), 1000);
+ return ret;
+}
+
+static int opt4060_read_illuminance(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int *val)
+{
+ struct opt4060_chip *chip = iio_priv(indio_dev);
+ int ret;
+
+ ret = opt4060_trigger_new_samples(indio_dev);
+ if (ret) {
+ dev_err(chip->dev, "Failed to trigger new samples.\n");
+ return ret;
+ }
+ ret = opt4060_calc_illuminance(chip, val);
+ if (ret) {
+ dev_err(chip->dev, "Failed to calculate illuminance.\n");
+ return ret;
+ }
+
+ return IIO_VAL_INT;
+}
+
+static int opt4060_set_int_time(struct opt4060_chip *chip)
+{
+ unsigned int regval;
+ int ret;
+
+ regval = FIELD_PREP(OPT4060_CTRL_CONV_TIME_MASK, chip->int_time);
+ ret = regmap_update_bits(chip->regmap, OPT4060_CTRL,
+ OPT4060_CTRL_CONV_TIME_MASK, regval);
+ if (ret)
+ dev_err(chip->dev, "Failed to set integration time.\n");
+
+ return ret;
+}
+
+static int opt4060_power_down(struct opt4060_chip *chip)
+{
+ int ret;
+
+ ret = regmap_clear_bits(chip->regmap, OPT4060_CTRL, OPT4060_CTRL_OPER_MODE_MASK);
+ if (ret)
+ dev_err(chip->dev, "Failed to power down\n");
+
+ return ret;
+}
+
+static void opt4060_chip_off_action(void *chip)
+{
+ opt4060_power_down(chip);
+}
+
+#define _OPT4060_COLOR_CHANNEL(_color, _mask, _ev_spec, _num_ev_spec) \
+{ \
+ .type = IIO_INTENSITY, \
+ .modified = 1, \
+ .channel2 = IIO_MOD_LIGHT_##_color, \
+ .info_mask_separate = _mask, \
+ .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_INT_TIME), \
+ .info_mask_shared_by_all_available = BIT(IIO_CHAN_INFO_INT_TIME), \
+ .address = OPT4060_##_color##_MSB, \
+ .scan_index = OPT4060_##_color, \
+ .scan_type = { \
+ .sign = 'u', \
+ .realbits = 32, \
+ .storagebits = 32, \
+ .endianness = IIO_CPU, \
+ }, \
+ .event_spec = _ev_spec, \
+ .num_event_specs = _num_ev_spec, \
+}
+
+#define OPT4060_COLOR_CHANNEL(_color, _mask) \
+ _OPT4060_COLOR_CHANNEL(_color, _mask, opt4060_event_spec, \
+ ARRAY_SIZE(opt4060_event_spec)) \
+
+#define OPT4060_COLOR_CHANNEL_NO_EVENTS(_color, _mask) \
+ _OPT4060_COLOR_CHANNEL(_color, _mask, NULL, 0) \
+
+#define OPT4060_LIGHT_CHANNEL(_channel) \
+{ \
+ .type = IIO_LIGHT, \
+ .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), \
+ .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_INT_TIME), \
+ .info_mask_shared_by_all_available = BIT(IIO_CHAN_INFO_INT_TIME), \
+ .scan_index = OPT4060_##_channel, \
+ .scan_type = { \
+ .sign = 'u', \
+ .realbits = 32, \
+ .storagebits = 32, \
+ .endianness = IIO_CPU, \
+ }, \
+}
+
+static const struct iio_event_spec opt4060_event_spec[] = {
+ {
+ .type = IIO_EV_TYPE_THRESH,
+ .dir = IIO_EV_DIR_RISING,
+ .mask_separate = BIT(IIO_EV_INFO_VALUE) |
+ BIT(IIO_EV_INFO_ENABLE),
+ }, {
+ .type = IIO_EV_TYPE_THRESH,
+ .dir = IIO_EV_DIR_FALLING,
+ .mask_separate = BIT(IIO_EV_INFO_VALUE) |
+ BIT(IIO_EV_INFO_ENABLE),
+ }, {
+ .type = IIO_EV_TYPE_THRESH,
+ .dir = IIO_EV_DIR_EITHER,
+ .mask_separate = BIT(IIO_EV_INFO_PERIOD),
+ },
+};
+
+static const struct iio_chan_spec opt4060_channels[] = {
+ OPT4060_COLOR_CHANNEL(RED, BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE)),
+ OPT4060_COLOR_CHANNEL(GREEN, BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE)),
+ OPT4060_COLOR_CHANNEL(BLUE, BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE)),
+ OPT4060_COLOR_CHANNEL(CLEAR, BIT(IIO_CHAN_INFO_RAW)),
+ OPT4060_LIGHT_CHANNEL(ILLUM),
+ IIO_CHAN_SOFT_TIMESTAMP(OPT4060_NUM_CHANS),
+};
+
+static const struct iio_chan_spec opt4060_channels_no_events[] = {
+ OPT4060_COLOR_CHANNEL_NO_EVENTS(RED, BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE)),
+ OPT4060_COLOR_CHANNEL_NO_EVENTS(GREEN, BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE)),
+ OPT4060_COLOR_CHANNEL_NO_EVENTS(BLUE, BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE)),
+ OPT4060_COLOR_CHANNEL_NO_EVENTS(CLEAR, BIT(IIO_CHAN_INFO_RAW)),
+ OPT4060_LIGHT_CHANNEL(ILLUM),
+ IIO_CHAN_SOFT_TIMESTAMP(OPT4060_NUM_CHANS),
+};
+
+static int opt4060_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int *val, int *val2, long mask)
+{
+ struct opt4060_chip *chip = iio_priv(indio_dev);
+
+ switch (mask) {
+ case IIO_CHAN_INFO_RAW:
+ return opt4060_read_chan_raw(indio_dev, chan, val);
+ case IIO_CHAN_INFO_SCALE:
+ return opt4060_read_chan_scale(indio_dev, chan, val, val2);
+ case IIO_CHAN_INFO_PROCESSED:
+ return opt4060_read_illuminance(indio_dev, chan, val);
+ case IIO_CHAN_INFO_INT_TIME:
+ *val = 0;
+ *val2 = opt4060_int_time_reg[chip->int_time][0];
+ return IIO_VAL_INT_PLUS_MICRO;
+ default:
+ return -EINVAL;
+ }
+}
+
+static int opt4060_write_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int val, int val2, long mask)
+{
+ struct opt4060_chip *chip = iio_priv(indio_dev);
+ int int_time;
+
+ switch (mask) {
+ case IIO_CHAN_INFO_INT_TIME:
+ int_time = opt4060_als_time_to_index(val2);
+ if (int_time < 0)
+ return int_time;
+ chip->int_time = int_time;
+ return opt4060_set_int_time(chip);
+ default:
+ return -EINVAL;
+ }
+}
+
+static int opt4060_write_raw_get_fmt(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ long mask)
+{
+ switch (mask) {
+ case IIO_CHAN_INFO_INT_TIME:
+ return IIO_VAL_INT_PLUS_MICRO;
+ default:
+ return -EINVAL;
+ }
+}
+
+static u32 opt4060_calc_th_reg(u32 adc_val)
+{
+ u32 th_val, th_exp, bits;
+ /*
+ * The threshold registers take 4 bits of exponent and 12 bits of data
+ * ADC = TH_VAL << (8 + TH_EXP)
+ */
+ bits = fls(adc_val);
+
+ if (bits > 31)
+ th_exp = 11; /* Maximum exponent */
+ else if (bits > 20)
+ th_exp = bits - 20;
+ else
+ th_exp = 0;
+ th_val = (adc_val >> (8 + th_exp)) & 0xfff;
+
+ return (th_exp << 12) + th_val;
+}
+
+static u32 opt4060_calc_val_from_th_reg(u32 th_reg)
+{
+ /*
+ * The threshold registers take 4 bits of exponent and 12 bits of data
+ * ADC = TH_VAL << (8 + TH_EXP)
+ */
+ u32 th_val, th_exp;
+
+ th_exp = (th_reg >> 12) & 0xf;
+ th_val = th_reg & 0xfff;
+
+ return th_val << (8 + th_exp);
+}
+
+static bool opt4060_event_active(struct opt4060_chip *chip)
+{
+ return chip->thresh_event_lo_active || chip->thresh_event_hi_active;
+}
+
+static int opt4060_read_available(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ const int **vals, int *type, int *length,
+ long mask)
+{
+ switch (mask) {
+ case IIO_CHAN_INFO_INT_TIME:
+ *length = ARRAY_SIZE(opt4060_int_time_available) * 2;
+ *vals = (const int *)opt4060_int_time_available;
+ *type = IIO_VAL_INT_PLUS_MICRO;
+ return IIO_AVAIL_LIST;
+
+ default:
+ return -EINVAL;
+ }
+}
+
+static int opt4060_event_set_state(struct iio_dev *indio_dev, bool state)
+{
+ struct opt4060_chip *chip = iio_priv(indio_dev);
+ int ret = 0;
+
+ if (state)
+ ret = opt4060_set_continous_mode(chip, true);
+ else if (!iio_buffer_enabled(indio_dev) && chip->irq)
+ ret = opt4060_set_continous_mode(chip, false);
+
+ if (ret)
+ dev_err(chip->dev, "Failed to set event state.\n");
+
+ return ret;
+}
+
+static int opt4060_trigger_set_state(struct iio_trigger *trig, bool state)
+{
+ struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig);
+ struct opt4060_chip *chip = iio_priv(indio_dev);
+ int ret = 0;
+
+ if (state) {
+ ret = opt4060_set_int_state(chip, OPT4060_INT_CTRL_ALL_CH);
+ if (ret)
+ return ret;
+ return opt4060_set_continous_mode(chip, true);
+ }
+ if (!opt4060_event_active(chip) && chip->irq) {
+ ret = opt4060_set_continous_mode(chip, false);
+ if (ret)
+ return ret;
+ }
+ return opt4060_set_int_state(chip, OPT4060_INT_CTRL_THRESHOLD);
+}
+
+static ssize_t opt4060_read_ev_period(struct opt4060_chip *chip, int *val,
+ int *val2)
+{
+ int ret, pers, fault_count, int_time;
+ u64 uval;
+
+ int_time = opt4060_int_time_reg[chip->int_time][0];
+
+ ret = regmap_read(chip->regmap, OPT4060_CTRL, &fault_count);
+ if (ret < 0)
+ return ret;
+
+ fault_count = fault_count & OPT4060_CTRL_FAULT_COUNT_MASK;
+ switch (fault_count) {
+ case OPT4060_CTRL_FAULT_COUNT_2:
+ pers = 2;
+ break;
+ case OPT4060_CTRL_FAULT_COUNT_4:
+ pers = 4;
+ break;
+ case OPT4060_CTRL_FAULT_COUNT_8:
+ pers = 8;
+ break;
+
+ default:
+ pers = 1;
+ break;
+ }
+
+ uval = mul_u32_u32(int_time, pers);
+ *val = div_u64_rem(uval, MICRO, val2);
+
+ return IIO_VAL_INT_PLUS_MICRO;
+}
+
+static ssize_t opt4060_write_ev_period(struct opt4060_chip *chip, int val,
+ int val2)
+{
+ u64 uval, int_time;
+ unsigned int regval, fault_count_val;
+
+ uval = mul_u32_u32(val, MICRO) + val2;
+ int_time = opt4060_int_time_reg[chip->int_time][0];
+
+ /* Check if the period is closest to 1, 2, 4 or 8 times integration time.*/
+ if (uval <= int_time)
+ fault_count_val = OPT4060_CTRL_FAULT_COUNT_1;
+ else if (uval <= int_time * 2)
+ fault_count_val = OPT4060_CTRL_FAULT_COUNT_2;
+ else if (uval <= int_time * 4)
+ fault_count_val = OPT4060_CTRL_FAULT_COUNT_4;
+ else
+ fault_count_val = OPT4060_CTRL_FAULT_COUNT_8;
+
+ regval = FIELD_PREP(OPT4060_CTRL_FAULT_COUNT_MASK, fault_count_val);
+ return regmap_update_bits(chip->regmap, OPT4060_CTRL,
+ OPT4060_CTRL_FAULT_COUNT_MASK, regval);
+}
+
+static int opt4060_get_channel_sel(struct opt4060_chip *chip, int *ch_sel)
+{
+ int ret;
+ u32 regval;
+
+ ret = regmap_read(chip->regmap, OPT4060_INT_CTRL, ®val);
+ if (ret)
+ dev_err(chip->dev, "Failed to get channel selection.\n");
+ *ch_sel = FIELD_GET(OPT4060_INT_CTRL_THRESH_SEL, regval);
+ return ret;
+}
+
+static int opt4060_set_channel_sel(struct opt4060_chip *chip, int ch_sel)
+{
+ int ret;
+ u32 regval;
+
+ regval = FIELD_PREP(OPT4060_INT_CTRL_THRESH_SEL, ch_sel);
+ ret = regmap_update_bits(chip->regmap, OPT4060_INT_CTRL,
+ OPT4060_INT_CTRL_THRESH_SEL, regval);
+ if (ret)
+ dev_err(chip->dev, "Failed to set channel selection.\n");
+ return ret;
+}
+
+static int opt4060_get_thresholds(struct opt4060_chip *chip, u32 *th_lo, u32 *th_hi)
+{
+ int ret;
+ u32 regval;
+
+ ret = regmap_read(chip->regmap, OPT4060_THRESHOLD_LOW, ®val);
+ if (ret) {
+ dev_err(chip->dev, "Failed to read THRESHOLD_LOW.\n");
+ return ret;
+ }
+ *th_lo = opt4060_calc_val_from_th_reg(regval);
+
+ ret = regmap_read(chip->regmap, OPT4060_THRESHOLD_HIGH, ®val);
+ if (ret) {
+ dev_err(chip->dev, "Failed to read THRESHOLD_LOW.\n");
+ return ret;
+ }
+ *th_hi = opt4060_calc_val_from_th_reg(regval);
+
+ return ret;
+}
+
+static int opt4060_set_thresholds(struct opt4060_chip *chip, u32 th_lo, u32 th_hi)
+{
+ int ret;
+
+ ret = regmap_write(chip->regmap, OPT4060_THRESHOLD_LOW, opt4060_calc_th_reg(th_lo));
+ if (ret) {
+ dev_err(chip->dev, "Failed to write THRESHOLD_LOW.\n");
+ return ret;
+ }
+
+ ret = regmap_write(chip->regmap, OPT4060_THRESHOLD_HIGH, opt4060_calc_th_reg(th_hi));
+ if (ret)
+ dev_err(chip->dev, "Failed to write THRESHOLD_HIGH.\n");
+
+ return ret;
+}
+
+static int opt4060_read_event(struct iio_dev *indio_dev,
+ const struct iio_chan_spec *chan,
+ enum iio_event_type type,
+ enum iio_event_direction dir,
+ enum iio_event_info info,
+ int *val, int *val2)
+{
+ struct opt4060_chip *chip = iio_priv(indio_dev);
+ u32 th_lo, th_hi;
+ int ret;
+
+ if (chan->type != IIO_INTENSITY)
+ return -EINVAL;
+ if (type != IIO_EV_TYPE_THRESH)
+ return -EINVAL;
+
+ switch (info) {
+ case IIO_EV_INFO_VALUE:
+ ret = opt4060_get_thresholds(chip, &th_lo, &th_hi);
+ if (ret)
+ return ret;
+ if (dir == IIO_EV_DIR_FALLING) {
+ *val = th_lo;
+ ret = IIO_VAL_INT;
+ } else if (dir == IIO_EV_DIR_RISING) {
+ *val = th_hi;
+ ret = IIO_VAL_INT;
+ }
+ return ret;
+ case IIO_EV_INFO_PERIOD:
+ return opt4060_read_ev_period(chip, val, val2);
+ default:
+ return -EINVAL;
+ }
+}
+
+static int opt4060_write_event(struct iio_dev *indio_dev,
+ const struct iio_chan_spec *chan,
+ enum iio_event_type type,
+ enum iio_event_direction dir,
+ enum iio_event_info info,
+ int val, int val2)
+{
+ struct opt4060_chip *chip = iio_priv(indio_dev);
+ u32 th_lo, th_hi;
+ int ret;
+
+ if (chan->type != IIO_INTENSITY)
+ return -EINVAL;
+ if (type != IIO_EV_TYPE_THRESH)
+ return -EINVAL;
+
+ switch (info) {
+ case IIO_EV_INFO_VALUE:
+ ret = opt4060_get_thresholds(chip, &th_lo, &th_hi);
+ if (ret)
+ return ret;
+ if (dir == IIO_EV_DIR_FALLING)
+ th_lo = val;
+ else if (dir == IIO_EV_DIR_RISING)
+ th_hi = val;
+ return opt4060_set_thresholds(chip, th_lo, th_hi);
+ case IIO_EV_INFO_PERIOD:
+ return opt4060_write_ev_period(chip, val, val2);
+ default:
+ return -EINVAL;
+ }
+}
+
+static int opt4060_read_event_config(struct iio_dev *indio_dev,
+ const struct iio_chan_spec *chan,
+ enum iio_event_type type,
+ enum iio_event_direction dir)
+{
+ int ch_sel, ch_idx = chan->scan_index;
+ struct opt4060_chip *chip = iio_priv(indio_dev);
+ int ret;
+
+ if (chan->type != IIO_INTENSITY)
+ return -EINVAL;
+ if (type != IIO_EV_TYPE_THRESH)
+ return -EINVAL;
+
+ ret = opt4060_get_channel_sel(chip, &ch_sel);
+ if (ret)
+ return ret;
+
+ if (((dir == IIO_EV_DIR_FALLING) && chip->thresh_event_lo_active) ||
+ ((dir == IIO_EV_DIR_RISING) && chip->thresh_event_hi_active))
+ return ch_sel == ch_idx;
+
+ return ret;
+}
+
+static int opt4060_write_event_config(struct iio_dev *indio_dev,
+ const struct iio_chan_spec *chan,
+ enum iio_event_type type,
+ enum iio_event_direction dir, int state)
+{
+ int ch_sel, ch_idx = chan->scan_index;
+ struct opt4060_chip *chip = iio_priv(indio_dev);
+ int ret;
+
+ if (chan->type != IIO_INTENSITY)
+ return -EINVAL;
+ if (type != IIO_EV_TYPE_THRESH)
+ return -EINVAL;
+
+ ret = opt4060_get_channel_sel(chip, &ch_sel);
+ if (ret)
+ return ret;
+
+ if (state) {
+ /* Only one channel can be active at the same time */
+ if ((chip->thresh_event_lo_active ||
+ chip->thresh_event_hi_active) && (ch_idx != ch_sel))
+ return -EBUSY;
+ if (dir == IIO_EV_DIR_FALLING)
+ chip->thresh_event_lo_active = true;
+ else if (dir == IIO_EV_DIR_RISING)
+ chip->thresh_event_hi_active = true;
+ ret = opt4060_set_channel_sel(chip, ch_idx);
+ if (ret)
+ return ret;
+ } else {
+ if (ch_idx == ch_sel) {
+ if (dir == IIO_EV_DIR_FALLING)
+ chip->thresh_event_lo_active = false;
+ else if (dir == IIO_EV_DIR_RISING)
+ chip->thresh_event_hi_active = false;
+ }
+ }
+
+ return opt4060_event_set_state(indio_dev, chip->thresh_event_hi_active |
+ chip->thresh_event_lo_active);
+}
+
+static const struct iio_info opt4060_info = {
+ .read_raw = opt4060_read_raw,
+ .write_raw = opt4060_write_raw,
+ .write_raw_get_fmt = opt4060_write_raw_get_fmt,
+ .read_avail = opt4060_read_available,
+ .read_event_value = opt4060_read_event,
+ .write_event_value = opt4060_write_event,
+ .read_event_config = opt4060_read_event_config,
+ .write_event_config = opt4060_write_event_config,
+};
+
+static int opt4060_load_defaults(struct opt4060_chip *chip)
+{
+ u16 reg;
+ int ret;
+
+ chip->int_time = OPT4060_DEFAULT_CONVERSION_TIME;
+
+ /* Set initial MIN/MAX thresholds */
+ ret = opt4060_set_thresholds(chip, 0, UINT_MAX);
+ if (ret)
+ return ret;
+
+ /*
+ * Setting auto-range, latched window for thresholds, one-shot conversion
+ * and quick wake-up mode as default.
+ */
+ reg = FIELD_PREP(OPT4060_CTRL_RANGE_MASK,
+ OPT4060_CTRL_LIGHT_SCALE_AUTO);
+ reg |= FIELD_PREP(OPT4060_CTRL_CONV_TIME_MASK, chip->int_time);
+ reg |= FIELD_PREP(OPT4060_CTRL_OPER_MODE_MASK,
+ OPT4060_CTRL_OPER_MODE_ONE_SHOT);
+ reg |= OPT4060_CTRL_QWAKE_MASK | OPT4060_CTRL_LATCH_MASK;
+
+ ret = regmap_write(chip->regmap, OPT4060_CTRL, reg);
+ if (ret)
+ dev_err(chip->dev, "Failed to set configuration\n");
+
+ return ret;
+}
+
+static bool opt4060_volatile_reg(struct device *dev, unsigned int reg)
+{
+ return reg <= OPT4060_CLEAR_LSB || reg == OPT4060_RES_CTRL;
+}
+
+static bool opt4060_writable_reg(struct device *dev, unsigned int reg)
+{
+ return reg >= OPT4060_THRESHOLD_LOW || reg >= OPT4060_INT_CTRL;
+}
+
+static bool opt4060_readonly_reg(struct device *dev, unsigned int reg)
+{
+ return reg == OPT4060_DEVICE_ID;
+}
+
+static bool opt4060_readable_reg(struct device *dev, unsigned int reg)
+{
+ /* Volatile, writable and read-only registers are readable. */
+ return opt4060_volatile_reg(dev, reg) || opt4060_writable_reg(dev, reg) ||
+ opt4060_readonly_reg(dev, reg);
+}
+
+static const struct regmap_config opt4060_regmap_config = {
+ .name = "opt4060",
+ .reg_bits = 8,
+ .val_bits = 16,
+ .cache_type = REGCACHE_RBTREE,
+ .max_register = OPT4060_DEVICE_ID,
+ .readable_reg = opt4060_readable_reg,
+ .writeable_reg = opt4060_writable_reg,
+ .volatile_reg = opt4060_volatile_reg,
+ .val_format_endian = REGMAP_ENDIAN_BIG,
+};
+
+static const struct iio_trigger_ops opt4060_trigger_ops = {
+ .set_trigger_state = opt4060_trigger_set_state,
+};
+
+static irqreturn_t opt4060_trigger_handler(int irq, void *p)
+{
+ struct iio_poll_func *pf = p;
+ struct iio_dev *idev = pf->indio_dev;
+ struct opt4060_chip *chip = iio_priv(idev);
+ struct {
+ u32 chan[OPT4060_NUM_CHANS];
+ aligned_s64 ts;
+ } raw;
+ int i = 0;
+ int chan, ret;
+
+ /* If the trigger is coming for a different driver, a new sample is needed.*/
+ if (iio_trigger_validate_own_device(idev->trig, idev))
+ opt4060_trigger_new_samples(idev);
+
+ memset(&raw, 0, sizeof(raw));
+
+ iio_for_each_active_channel(idev, chan) {
+ if (chan == OPT4060_ILLUM)
+ ret = opt4060_calc_illuminance(chip, &raw.chan[i++]);
+ else
+ ret = opt4060_read_raw_value(chip,
+ idev->channels[chan].address,
+ &raw.chan[i++]);
+ if (ret) {
+ dev_err(chip->dev, "Reading channel data failed\n");
+ goto err_read;
+ }
+ }
+
+ iio_push_to_buffers_with_timestamp(idev, &raw, pf->timestamp);
+err_read:
+ iio_trigger_notify_done(idev->trig);
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t opt4060_irq_thread(int irq, void *private)
+{
+ struct iio_dev *idev = private;
+ struct opt4060_chip *chip = iio_priv(idev);
+ int ret, dummy;
+ unsigned int int_res;
+
+ ret = regmap_read(chip->regmap, OPT4060_RES_CTRL, &int_res);
+ if (ret < 0) {
+ dev_err(chip->dev, "Failed to read interrupt reasons.\n");
+ return IRQ_NONE;
+ }
+
+ /* Read OPT4060_CTRL to clear interrupt */
+ ret = regmap_read(chip->regmap, OPT4060_CTRL, &dummy);
+ if (ret < 0) {
+ dev_err(chip->dev, "Failed to clear interrupt\n");
+ return IRQ_NONE;
+ }
+
+ /* Handle events */
+ if (int_res & (OPT4060_RES_CTRL_FLAG_H | OPT4060_RES_CTRL_FLAG_L)) {
+ u64 code;
+ int chan = 0;
+
+ ret = opt4060_get_channel_sel(chip, &chan);
+ if (ret) {
+ dev_err(chip->dev, "Failed to read threshold channel.\n");
+ return IRQ_NONE;
+ }
+
+ /* Check if the interrupt is from the lower threshold */
+ if (int_res & OPT4060_RES_CTRL_FLAG_L) {
+ code = IIO_MOD_EVENT_CODE(IIO_INTENSITY,
+ chan,
+ idev->channels[chan].channel2,
+ IIO_EV_TYPE_THRESH,
+ IIO_EV_DIR_FALLING);
+ iio_push_event(idev, code, iio_get_time_ns(idev));
+ }
+ /* Check if the interrupt is from the upper threshold */
+ if (int_res & OPT4060_RES_CTRL_FLAG_H) {
+ code = IIO_MOD_EVENT_CODE(IIO_INTENSITY,
+ chan,
+ idev->channels[chan].channel2,
+ IIO_EV_TYPE_THRESH,
+ IIO_EV_DIR_RISING);
+ iio_push_event(idev, code, iio_get_time_ns(idev));
+ }
+ }
+
+ /* Handle conversion ready */
+ if (int_res & OPT4060_RES_CTRL_CONV_READY) {
+ /* Signal completion for potentially waiting reads */
+ complete(&chip->completion);
+
+ /* Handle data ready triggers */
+ if (iio_buffer_enabled(idev))
+ iio_trigger_poll_nested(chip->trig);
+ }
+ return IRQ_HANDLED;
+}
+
+static int opt4060_setup_buffer(struct opt4060_chip *chip, struct iio_dev *idev)
+{
+ int ret;
+
+ ret = devm_iio_triggered_buffer_setup(chip->dev, idev,
+ &iio_pollfunc_store_time,
+ opt4060_trigger_handler, NULL);
+ if (ret)
+ return dev_err_probe(chip->dev, ret,
+ "Buffer setup failed.\n");
+ return ret;
+}
+
+static int opt4060_setup_trigger(struct opt4060_chip *chip, struct iio_dev *idev)
+{
+ struct iio_trigger *data_trigger;
+ char *name;
+ int ret;
+
+ data_trigger = devm_iio_trigger_alloc(chip->dev, "%s-data-ready-dev%d",
+ idev->name, iio_device_id(idev));
+ if (!data_trigger)
+ return -ENOMEM;
+
+ /* The data trigger allows for sample capture on each new conversion ready interrupt. */
+ chip->trig = data_trigger;
+ data_trigger->ops = &opt4060_trigger_ops;
+ iio_trigger_set_drvdata(data_trigger, idev);
+ ret = devm_iio_trigger_register(chip->dev, data_trigger);
+ if (ret)
+ return dev_err_probe(chip->dev, ret,
+ "Data ready trigger registration failed\n");
+
+ name = devm_kasprintf(chip->dev, GFP_KERNEL, "%s-opt4060",
+ dev_name(chip->dev));
+ if (!name)
+ return dev_err_probe(chip->dev, -ENOMEM, "Failed to alloc chip name\n");
+
+ ret = devm_request_threaded_irq(chip->dev, chip->irq, NULL, opt4060_irq_thread,
+ IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING |
+ IRQF_ONESHOT, name, idev);
+ if (ret)
+ return dev_err_probe(chip->dev, ret, "Could not request IRQ\n");
+
+ init_completion(&chip->completion);
+
+ ret = regmap_write_bits(chip->regmap, OPT4060_INT_CTRL,
+ OPT4060_INT_CTRL_OUTPUT,
+ OPT4060_INT_CTRL_OUTPUT);
+ if (ret)
+ return dev_err_probe(chip->dev, ret,
+ "Failed to set interrupt as output\n");
+
+ return 0;
+}
+
+static int opt4060_probe(struct i2c_client *client)
+{
+ struct device *dev = &client->dev;
+ struct opt4060_chip *chip;
+ struct iio_dev *indio_dev;
+ int ret;
+ unsigned int regval, dev_id;
+
+ indio_dev = devm_iio_device_alloc(dev, sizeof(*chip));
+ if (!indio_dev)
+ return -ENOMEM;
+
+ chip = iio_priv(indio_dev);
+
+ ret = devm_regulator_get_enable(dev, "vdd");
+ if (ret)
+ return dev_err_probe(dev, ret, "Failed to enable vdd supply\n");
+
+ chip->regmap = devm_regmap_init_i2c(client, &opt4060_regmap_config);
+ if (IS_ERR(chip->regmap))
+ return dev_err_probe(dev, PTR_ERR(chip->regmap),
+ "regmap initialization failed\n");
+
+ chip->dev = dev;
+ chip->irq = client->irq;
+
+ indio_dev->info = &opt4060_info;
+
+ ret = regmap_reinit_cache(chip->regmap, &opt4060_regmap_config);
+ if (ret)
+ return dev_err_probe(dev, ret,
+ "failed to reinit regmap cache\n");
+
+ ret = regmap_read(chip->regmap, OPT4060_DEVICE_ID, ®val);
+ if (ret < 0)
+ return dev_err_probe(dev, ret,
+ "Failed to read the device ID register\n");
+
+ dev_id = FIELD_GET(OPT4060_DEVICE_ID_MASK, regval);
+ if (dev_id != OPT4060_DEVICE_ID_VAL)
+ dev_info(dev, "Device ID: %#04x unknown\n", dev_id);
+
+ if (chip->irq) {
+ indio_dev->channels = opt4060_channels;
+ indio_dev->num_channels = ARRAY_SIZE(opt4060_channels);
+ } else {
+ indio_dev->channels = opt4060_channels_no_events;
+ indio_dev->num_channels = ARRAY_SIZE(opt4060_channels_no_events);
+ }
+ indio_dev->modes = INDIO_DIRECT_MODE;
+ indio_dev->name = "opt4060";
+
+ ret = opt4060_load_defaults(chip);
+ if (ret < 0)
+ return dev_err_probe(dev, ret,
+ "Failed to set sensor defaults\n");
+
+ ret = devm_add_action_or_reset(dev, opt4060_chip_off_action, chip);
+ if (ret < 0)
+ return dev_err_probe(dev, ret,
+ "Failed to setup power off action\n");
+
+ ret = opt4060_setup_buffer(chip, indio_dev);
+ if (ret)
+ return ret;
+
+ if (chip->irq) {
+ ret = opt4060_setup_trigger(chip, indio_dev);
+ if (ret)
+ return ret;
+ }
+
+ return devm_iio_device_register(dev, indio_dev);
+}
+
+static const struct i2c_device_id opt4060_id[] = {
+ { "opt4060", },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, opt4060_id);
+
+static const struct of_device_id opt4060_of_match[] = {
+ { .compatible = "ti,opt4060" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, opt4060_of_match);
+
+static struct i2c_driver opt4060_driver = {
+ .driver = {
+ .name = "opt4060",
+ .of_match_table = opt4060_of_match,
+ },
+ .probe = opt4060_probe,
+ .id_table = opt4060_id,
+};
+module_i2c_driver(opt4060_driver);
+
+MODULE_AUTHOR("Per-Daniel Olsson <perdaniel.olsson@axis.com>");
+MODULE_DESCRIPTION("Texas Instruments OPT4060 RGBW color sensor driver");
+MODULE_LICENSE("GPL");
Add support for Texas Instruments OPT4060 RGBW Color sensor. Signed-off-by: Per-Daniel Olsson <perdaniel.olsson@axis.com> --- Documentation/ABI/testing/sysfs-bus-iio | 4 + Documentation/iio/index.rst | 1 + Documentation/iio/opt4060.rst | 52 + drivers/iio/light/Kconfig | 13 + drivers/iio/light/Makefile | 1 + drivers/iio/light/opt4060.c | 1295 +++++++++++++++++++++++ 6 files changed, 1366 insertions(+) create mode 100644 Documentation/iio/opt4060.rst create mode 100644 drivers/iio/light/opt4060.c