@@ -202,6 +202,27 @@ int ad_sd_reset(struct ad_sigma_delta *sigma_delta,
}
EXPORT_SYMBOL_NS_GPL(ad_sd_reset, IIO_AD_SIGMA_DELTA);
+static bool ad_sd_disable_irq(struct ad_sigma_delta *sigma_delta)
+{
+ guard(spinlock_irqsave)(&sigma_delta->irq_lock);
+
+ if (!sigma_delta->irq_dis) {
+ sigma_delta->irq_dis = true;
+ disable_irq_nosync(sigma_delta->irq_line);
+ return true;
+ } else {
+ return false;
+ }
+}
+
+static void ad_sd_enable_irq(struct ad_sigma_delta *sigma_delta)
+{
+ guard(spinlock_irqsave)(&sigma_delta->irq_lock);
+
+ sigma_delta->irq_dis = false;
+ enable_irq(sigma_delta->irq_line);
+}
+
int ad_sd_calibrate(struct ad_sigma_delta *sigma_delta,
unsigned int mode, unsigned int channel)
{
@@ -221,12 +242,10 @@ int ad_sd_calibrate(struct ad_sigma_delta *sigma_delta,
if (ret < 0)
goto out;
- sigma_delta->irq_dis = false;
- enable_irq(sigma_delta->irq_line);
+ ad_sd_enable_irq(sigma_delta);
time_left = wait_for_completion_timeout(&sigma_delta->completion, 2 * HZ);
if (time_left == 0) {
- sigma_delta->irq_dis = true;
- disable_irq_nosync(sigma_delta->irq_line);
+ ad_sd_disable_irq(sigma_delta);
ret = -EIO;
} else {
ret = 0;
@@ -294,8 +313,7 @@ int ad_sigma_delta_single_conversion(struct iio_dev *indio_dev,
ad_sigma_delta_set_mode(sigma_delta, AD_SD_MODE_SINGLE);
- sigma_delta->irq_dis = false;
- enable_irq(sigma_delta->irq_line);
+ ad_sd_enable_irq(sigma_delta);
ret = wait_for_completion_interruptible_timeout(
&sigma_delta->completion, HZ);
@@ -314,10 +332,7 @@ int ad_sigma_delta_single_conversion(struct iio_dev *indio_dev,
&raw_sample);
out:
- if (!sigma_delta->irq_dis) {
- disable_irq_nosync(sigma_delta->irq_line);
- sigma_delta->irq_dis = true;
- }
+ ad_sd_disable_irq(sigma_delta);
sigma_delta->keep_cs_asserted = false;
ad_sigma_delta_set_mode(sigma_delta, AD_SD_MODE_IDLE);
@@ -396,8 +411,7 @@ static int ad_sd_buffer_postenable(struct iio_dev *indio_dev)
if (ret)
goto err_unlock;
- sigma_delta->irq_dis = false;
- enable_irq(sigma_delta->irq_line);
+ ad_sd_enable_irq(sigma_delta);
return 0;
@@ -414,10 +428,7 @@ static int ad_sd_buffer_postdisable(struct iio_dev *indio_dev)
reinit_completion(&sigma_delta->completion);
wait_for_completion_timeout(&sigma_delta->completion, HZ);
- if (!sigma_delta->irq_dis) {
- disable_irq_nosync(sigma_delta->irq_line);
- sigma_delta->irq_dis = true;
- }
+ ad_sd_disable_irq(sigma_delta);
sigma_delta->keep_cs_asserted = false;
ad_sigma_delta_set_mode(sigma_delta, AD_SD_MODE_IDLE);
@@ -516,8 +527,7 @@ static irqreturn_t ad_sd_trigger_handler(int irq, void *p)
irq_handled:
iio_trigger_notify_done(indio_dev->trig);
- sigma_delta->irq_dis = false;
- enable_irq(sigma_delta->irq_line);
+ ad_sd_enable_irq(sigma_delta);
return IRQ_HANDLED;
}
@@ -550,12 +560,13 @@ static irqreturn_t ad_sd_data_rdy_trig_poll(int irq, void *private)
*
* So read the MOSI line as GPIO (if available) and only trigger the irq
* if the line is active.
+ *
+ * Also as only disable_irq_nosync() is used to disable the irq, only
+ * act if the irq wasn't disabled before.
*/
-
- if (!sigma_delta->rdy_gpiod || gpiod_get_value(sigma_delta->rdy_gpiod)) {
+ if ((!sigma_delta->rdy_gpiod || gpiod_get_value(sigma_delta->rdy_gpiod)) &&
+ ad_sd_disable_irq(sigma_delta)) {
complete(&sigma_delta->completion);
- disable_irq_nosync(irq);
- sigma_delta->irq_dis = true;
iio_trigger_poll(sigma_delta->trig);
return IRQ_HANDLED;
@@ -691,6 +702,8 @@ int ad_sd_init(struct ad_sigma_delta *sigma_delta, struct iio_dev *indio_dev,
}
}
+ spin_lock_init(&sigma_delta->irq_lock);
+
if (info->irq_line)
sigma_delta->irq_line = info->irq_line;
else
@@ -85,6 +85,7 @@ struct ad_sigma_delta {
/* private: */
struct completion completion;
+ spinlock_t irq_lock; /* protects .irq_dis and irq en/disable state */
bool irq_dis;
bool bus_locked;
The ad_sigma_delta driver helper uses irq_disable_nosync(). With that one it is possible that the irq handler still runs after the irq_disable_nosync() function call returns. Also to properly synchronize irq disabling in the different threads proper locking is needed and because it's unclear if the irq handler's irq_disable_nosync() call comes first or the one in the enabler's error path, all code locations that disable the irq must check for .irq_dis first to ensure there is exactly one disable per enable. So add a spinlock to the struct ad_sigma_delta and use it to synchronize irq enabling and disabling. Also only act in the irq handler if the irq is still enabled. Fixes: af3008485ea0 ("iio:adc: Add common code for ADI Sigma Delta devices") Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> --- drivers/iio/adc/ad_sigma_delta.c | 57 ++++++++++++++++---------- include/linux/iio/adc/ad_sigma_delta.h | 1 + 2 files changed, 36 insertions(+), 22 deletions(-)