diff mbox series

[8/9] arm64: dts: st: add timer pins for stm32mp257f-ev1

Message ID 20241218090153.742869-9-fabrice.gasnier@foss.st.com (mailing list archive)
State Handled Elsewhere
Headers show
Series Add STM32MP25 timers support: MFD, PWM, IIO and counter drivers | expand

Commit Message

Fabrice Gasnier Dec. 18, 2024, 9:01 a.m. UTC 
Add timer pins available on stm32mp257f-ev1, configured for PWM:
- timer3 CH2 is available on mikroBUS connector
- timer8 CH1, timer8 CH4, timer10 CH1 and timer12 CH2 are available
  on EXPANSION connector
Arbitrary define all these pins to be used as PWM (output) channels,
except for timer10 CH1, to be used as counter input.

Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
---
 arch/arm64/boot/dts/st/stm32mp25-pinctrl.dtsi | 61 +++++++++++++++++++
 1 file changed, 61 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/st/stm32mp25-pinctrl.dtsi b/arch/arm64/boot/dts/st/stm32mp25-pinctrl.dtsi
index 8fdd5f020425..bb9dc82d3dd5 100644
--- a/arch/arm64/boot/dts/st/stm32mp25-pinctrl.dtsi
+++ b/arch/arm64/boot/dts/st/stm32mp25-pinctrl.dtsi
@@ -82,6 +82,53 @@  pins {
 		};
 	};
 
+	pwm3_pins_a: pwm3-0 {
+		pins {
+			pinmux = <STM32_PINMUX('B', 15, AF7)>; /* TIM3_CH2 */
+			bias-pull-down;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+	};
+
+	pwm3_sleep_pins_a: pwm3-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('B', 15, ANALOG)>; /* TIM3_CH2 */
+		};
+	};
+
+	pwm8_pins_a: pwm8-0 {
+		pins {
+			pinmux = <STM32_PINMUX('J', 5, AF8)>, /* TIM8_CH1 */
+				 <STM32_PINMUX('J', 4, AF8)>; /* TIM8_CH4 */
+			bias-pull-down;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+	};
+
+	pwm8_sleep_pins_a: pwm8-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('J', 5, ANALOG)>, /* TIM8_CH1 */
+				 <STM32_PINMUX('J', 4, ANALOG)>; /* TIM8_CH4 */
+		};
+	};
+
+	pwm12_pins_a: pwm12-0 {
+		pins {
+			pinmux = <STM32_PINMUX('B', 11, AF9)>; /* TIM12_CH2 */
+			bias-pull-down;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+	};
+
+	pwm12_sleep_pins_a: pwm12-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('B', 11, ANALOG)>; /* TIM12_CH2 */
+		};
+	};
+
 	sdmmc1_b4_pins_a: sdmmc1-b4-0 {
 		pins1 {
 			pinmux = <STM32_PINMUX('E', 4, AF10)>, /* SDMMC1_D0 */
@@ -158,6 +205,20 @@  pins1 {
 		};
 	};
 
+	tim10_counter_pins_a: tim10-counter-0 {
+		pins {
+			pinmux = <STM32_PINMUX('B', 9, AF9)>; /* TIM10_CH1 */
+			bias-disable;
+		};
+	};
+
+	tim10_counter_sleep_pins_a: tim10-counter-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('B', 9, ANALOG)>; /* TIM10_CH1 */
+			bias-disable;
+		};
+	};
+
 	usart2_pins_a: usart2-0 {
 		pins1 {
 			pinmux = <STM32_PINMUX('A', 4, AF6)>; /* USART2_TX */