@@ -45,6 +45,12 @@
#define ADI_AXI_ADC_REG_CTRL 0x0044
#define ADI_AXI_ADC_CTRL_DDR_EDGESEL_MASK BIT(1)
+#define ADI_AXI_ADC_REG_CNTRL_3 0x004c
+#define AD485X_CNTRL_3_PACKET_FORMAT_MSK GENMASK(1, 0)
+#define AD485X_PACKET_FORMAT_20BIT 0x0
+#define AD485X_PACKET_FORMAT_24BIT 0x1
+#define AD485X_PACKET_FORMAT_32BIT 0x2
+
#define ADI_AXI_ADC_REG_DRP_STATUS 0x0074
#define ADI_AXI_ADC_DRP_LOCKED BIT(17)
@@ -312,6 +318,45 @@ static int axi_adc_interface_type_get(struct iio_backend *back,
return 0;
}
+static int axi_adc_data_size_set(struct iio_backend *back, unsigned int size)
+{
+ struct adi_axi_adc_state *st = iio_backend_get_priv(back);
+ unsigned int val;
+
+ switch (size) {
+ /*
+ * There are two different variants of the AXI AD485X IP block, a 16-bit
+ * and a 20-bit variant.
+ * The 0x0 value (AD485X_PACKET_FORMAT_20BIT) is corresponding also to
+ * the 16-bit variant of the IP block.
+ */
+ case 16:
+ case 20:
+ val = AD485X_PACKET_FORMAT_20BIT;
+ break;
+ case 24:
+ val = AD485X_PACKET_FORMAT_24BIT;
+ break;
+ /*
+ * The 0x2 (AD485X_PACKET_FORMAT_32BIT) corresponds only to the 20-bit
+ * variant of the IP block. Setting this value properly is ensured by
+ * the upper layers of the drivers calling the axi-adc functions.
+ * Also, for 16-bit IP block, the 0x2 (AD485X_PACKET_FORMAT_32BIT)
+ * value is handled as maximum size available which is 24-bit for this
+ * configuration.
+ */
+ case 32:
+ val = AD485X_PACKET_FORMAT_32BIT;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return regmap_update_bits(st->regmap, ADI_AXI_ADC_REG_CNTRL_3,
+ AD485X_CNTRL_3_PACKET_FORMAT_MSK,
+ FIELD_PREP(AD485X_CNTRL_3_PACKET_FORMAT_MSK, val));
+}
+
static struct iio_buffer *axi_adc_request_buffer(struct iio_backend *back,
struct iio_dev *indio_dev)
{
@@ -360,6 +405,7 @@ static const struct iio_backend_ops adi_axi_adc_ops = {
.test_pattern_set = axi_adc_test_pattern_set,
.chan_status = axi_adc_chan_status,
.interface_type_get = axi_adc_interface_type_get,
+ .data_size_set = axi_adc_data_size_set,
.debugfs_reg_access = iio_backend_debugfs_ptr(axi_adc_reg_access),
.debugfs_print_chan_status = iio_backend_debugfs_ptr(axi_adc_debugfs_print_chan_status),
};
Add support for selecting the data format within the AXI ADC ip. Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com> --- changes in v9: - use shorter naming for macro definitions. drivers/iio/adc/adi-axi-adc.c | 46 +++++++++++++++++++++++++++++++++++ 1 file changed, 46 insertions(+)