diff mbox series

iio: dac: ad3552r: clear reset status flag

Message ID 20250122-wip-bl-ad3552r-clear-reset-v1-1-04c1760ca622@baylibre.com (mailing list archive)
State New
Headers show
Series iio: dac: ad3552r: clear reset status flag | expand

Commit Message

Angelo Dureghello Jan. 22, 2025, 8:32 p.m. UTC 
From: Angelo Dureghello <adureghello@baylibre.com>

Clear reset status flag, to keep error status register
clean after reset (ad3552r manual, rev B table 38).

Reset error flag was left to 1, so debugging registers, the
"Error Status Register" was dirty (0x01). It is important
to clear this bit, so if there is any reset event over normal
working mode, it is possible to detect it.

Signed-off-by: Angelo Dureghello <adureghello@baylibre.com>
---
 drivers/iio/dac/ad3552r.c | 6 ++++++
 1 file changed, 6 insertions(+)


---
base-commit: 07fa5fa97959422bbd663df056c9de0dec55e34f
change-id: 20250122-wip-bl-ad3552r-clear-reset-330bdf2ff56e

Best regards,
diff mbox series

Patch

diff --git a/drivers/iio/dac/ad3552r.c b/drivers/iio/dac/ad3552r.c
index e7206af53af6..7944f5c1d264 100644
--- a/drivers/iio/dac/ad3552r.c
+++ b/drivers/iio/dac/ad3552r.c
@@ -410,6 +410,12 @@  static int ad3552r_reset(struct ad3552r_desc *dac)
 		return ret;
 	}
 
+	/* Clear reset error flag, see ad3552r manual, rev B table 38. */
+	ret = ad3552r_write_reg(dac, AD3552R_REG_ADDR_ERR_STATUS,
+				AD3552R_MASK_RESET_STATUS);
+	if (ret)
+		return ret;
+
 	return ad3552r_update_reg_field(dac,
 					AD3552R_REG_ADDR_INTERFACE_CONFIG_A,
 					AD3552R_MASK_ADDR_ASCENSION,