diff --git a/Documentation/iio/ad4030.rst b/Documentation/iio/ad4030.rst
new file mode 100644
index 0000000000000000000000000000000000000000..41ce5ca5c710c46a0995d1b127fa1c10fca4c1eb
--- /dev/null
+++ b/Documentation/iio/ad4030.rst
@@ -0,0 +1,181 @@
+.. SPDX-License-Identifier: GPL-2.0-only
+
+=============
+AD4030 driver
+=============
+
+ADC driver for Analog Devices Inc. AD4030 and similar devices. The module name
+is ``ad4030``.
+
+
+Supported devices
+=================
+
+The following chips are supported by this driver:
+
+* `AD4030-24 <https://www.analog.com/AD4030-24>`_
+* `AD4032-24 <https://www.analog.com/AD4032-24>`_
+* `AD4630-16 <https://www.analog.com/AD4630-16>`_
+* `AD4630-24 <https://www.analog.com/AD4630-24>`_
+* `AD4632-16 <https://www.analog.com/AD4632-16>`_
+* `AD4632-24 <https://www.analog.com/AD4632-24>`_
+
+IIO channels
+============
+
+Each "hardware" channel as described in the datasheet is split in 2 IIO
+channels:
+
+- One channel for the differential data
+- One channel for the common byte.
+
+The possible IIO channels depending on the numbers of "hardware" channel are:
+
++------------------------------------+------------------------------------+
+| 1 channel ADC                      | 2 channels ADC                     |
++====================================+====================================+
+| - voltage0-voltage1 (differential) | - voltage0-voltage1 (differential) |
+| - voltage2 (common-mode)           | - voltage2-voltage3 (differential) |
+|                                    | - voltage4 (common-mode)           |
+|                                    | - voltage5 (common-mode)           |
++------------------------------------+------------------------------------+
+
+Labels
+------
+
+For ease of use, the IIO channels provide a label. For a differential channel,
+the label is ``differentialN`` where ``N`` is the "hardware" channel id. For a
+common-mode channel, the label is ``common-modeN`` where ``N`` is the
+"hardware" channel id.
+
+The possible labels are:
+
++-----------------+-----------------+
+| 1 channel ADC   | 2 channels ADC  |
++=================+=================+
+| - differential0 | - differential0 |
+| - common-mode0  | - differential1 |
+|                 | - common-mode0  |
+|                 | - common-mode1  |
++-----------------+-----------------+
+
+Supported features
+==================
+
+SPI wiring modes
+----------------
+
+The driver currently supports the following SPI wiring configurations:
+
+One lane mode
+^^^^^^^^^^^^^
+
+In this mode, each channel has its own SDO line to send the conversion results.
+At the moment this mode can only be used on AD4030 which has one channel so only
+one SDO line is used.
+
+.. code-block::
+
+    +-------------+         +-------------+
+    |     ADC     |         |     HOST    |
+    |             |         |             |
+    |         CNV |<--------| CNV         |
+    |          CS |<--------| CS          |
+    |         SDI |<--------| SDO         |
+    |        SDO0 |-------->| SDI         |
+    |        SCLK |<--------| SCLK        |
+    +-------------+         +-------------+
+
+Interleaved mode
+^^^^^^^^^^^^^^^^
+
+In this mode, both channels conversion results are bit interleaved one SDO line.
+As such the wiring is the same as `One lane mode`_.
+
+SPI Clock mode
+--------------
+
+Only the SPI clocking mode is supported.
+
+Output modes
+------------
+
+There are more exposed IIO channels than channels as describe in the devices
+datasheet. This is due to the `Differential data + common-mode`_ encoding
+2 types of information in one conversion result. As such a "device" channel
+provides 2 IIO channels, one for the differential data and one for the common
+byte.
+
+Differential data
+^^^^^^^^^^^^^^^^^
+
+This mode is selected when:
+
+- Only differential channels are enabled in a buffered read
+- Oversampling attribute is set to 1
+
+Differential data + common-mode
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+This mode is selected when:
+
+- Differential and common-mode channels are enabled in a buffered read
+- Oversampling attribute is set to 1
+
+For the 24-bits chips, this mode is also available with 16-bits differential
+data but is not selectable yet.
+
+Averaged differential data
+^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+This mode is selected when:
+
+- Only differential channels are selected enabled in a buffered read
+- Oversampling attribute is greater than 1
+
+Digital Gain and Offset
+-----------------------
+
+Each differential data channel has a 16-bits unsigned configurable hardware
+gain applied to it. By default it's equal to 1. Note that applying gain can
+cause numerical saturation.
+
+Each differential data channel has a signed configurable hardware offset.
+For the ADCs ending in ``-24``, the gain is encoded on 24-bits.
+Likewise, the ADCs ending in ``-16`` have a gain encoded on 16-bits. Note that
+applying an offset can cause numerical saturation.
+
+The final differential data returned by the ADC is computed by first applying
+the gain, then the offset.
+
+The gain is controlled by the ``calibscale`` IIO attribute while the offset is
+controlled by the ``calibbias`` attribute.
+
+Reference voltage
+-----------------
+
+The chip supports an external reference voltage via the ``REF`` input or an
+internal buffered reference voltage via the ``REFIN`` input. The driver looks
+at the device tree to determine which is being used. If ``ref-supply`` is
+present, then the external reference voltage is used and the internal buffer is
+disabled. If ``refin-supply`` is present, then the internal buffered reference
+voltage is used.
+
+Reset
+-----
+
+Both hardware and software reset are supported. The driver looks first at the
+device tree to see if the ``reset-gpio`` is populated.
+If not present, the driver will fallback to a software reset by wiring to the
+device's registers.
+
+Unimplemented features
+----------------------
+
+- ``BUSY`` indication
+- Additional wiring modes
+- Additional clock modes
+- Differential data 16-bits + common-mode for 24-bits chips
+- Overrange events
+- Test patterns
+
diff --git a/Documentation/iio/index.rst b/Documentation/iio/index.rst
index 5710f5b9e9582befb6dfa9d72c4fae8cae8ddeb7..2d334be2b7f29a82916a03d808bc0cb38e5a2252 100644
--- a/Documentation/iio/index.rst
+++ b/Documentation/iio/index.rst
@@ -19,6 +19,7 @@ Industrial I/O Kernel Drivers
    :maxdepth: 1
 
    ad4000
+   ad4030
    ad4695
    ad7380
    ad7606
diff --git a/MAINTAINERS b/MAINTAINERS
index bfb739c2f5f4ef9182c9789c797e63a93ab08080..364cfc6e8cc6f99b32319e5344c66b2b578bc5d5 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1314,6 +1314,7 @@ L:	linux-iio@vger.kernel.org
 S:	Supported
 W:	https://ez.analog.com/linux-software-drivers
 F:	Documentation/devicetree/bindings/iio/adc/adi,ad4030.yaml
+F:	Documentation/iio/ad4030.rst
 F:	drivers/iio/adc/ad4030.c
 
 ANALOG DEVICES INC AD4130 DRIVER
