diff mbox series

[v8,1/6] dt-bindings: iio: filter: Add lpf/hpf freq margins

Message ID 20250328174831.227202-2-sam.winchenbach@framepointer.org (mailing list archive)
State Accepted
Headers show
Series Update auto corner freq calculation | expand

Commit Message

Sam Winchenbach March 28, 2025, 5:48 p.m. UTC 
From: Sam Winchenbach <swinchenbach@arka.org>

Adds two properties to add a margin when automatically finding the
corner frequencies.

Signed-off-by: Sam Winchenbach <swinchenbach@arka.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../bindings/iio/filter/adi,admv8818.yaml     | 20 +++++++++++++++++++
 1 file changed, 20 insertions(+)
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/iio/filter/adi,admv8818.yaml b/Documentation/devicetree/bindings/iio/filter/adi,admv8818.yaml
index b77e855bd5946..ff0cb553e8716 100644
--- a/Documentation/devicetree/bindings/iio/filter/adi,admv8818.yaml
+++ b/Documentation/devicetree/bindings/iio/filter/adi,admv8818.yaml
@@ -44,6 +44,24 @@  properties:
   '#clock-cells':
     const: 0
 
+  adi,lpf-margin-mhz:
+    description:
+      Sets the minimum distance between the fundamental frequency of `rf_in`
+      and the corner frequency of the low-pass, output filter when operated in
+      'auto' mode. The selected low-pass corner frequency will be greater than,
+      or equal to, `rf_in` + `lpf-margin-hz`. If not setting is found that
+      satisfies this relationship the filter will be put into 'bypass'.
+    default: 0
+
+  adi,hpf-margin-mhz:
+    description:
+      Sets the minimum distance between the fundamental frequency of `rf_in`
+      and the corner frequency of the high-pass, input filter when operated in
+      'auto' mode. The selected high-pass corner frequency will be less than,
+      or equal to, `rf_in` - `hpf-margin-hz`. If not setting is found that
+      satisfies this relationship the filter will be put into 'bypass'.
+    default: 0
+
 required:
   - compatible
   - reg
@@ -61,6 +79,8 @@  examples:
         spi-max-frequency = <10000000>;
         clocks = <&admv8818_rfin>;
         clock-names = "rf_in";
+        adi,lpf-margin-mhz = <300>;
+        adi,hpf-margin-mhz = <300>;
       };
     };
 ...